thanks for that!
I was still under the impression that libftd2xx was a lot better than
libftdi but I tried it now and it works just fine.
fixed both problems I had, too!!!
Xiaofan Chen schrieb:
> 2009/8/3 Michael Jäntsch :
>
>> 1. This issue has been around for some time in t
Hello everyone,
I've been using openocd from the svn for a while now. Really great
project!!!
But I do have some trouble with release v0.2 that might be interesting
for you guys.
1. This issue has been around for some time in the svn. Some people
have reported it but it hasn't really b
[mailto:openocd-development-boun...@lists.berlios.de] On
Behalf Of Michael Jäntsch
Sent: 10 March 2009 17:46
To: openocd-development@lists.berlios.de
Subject: Re: [Openocd-development] ST32-PerformanceStick
That is pretty much what I was thinking.
The 500kHz is set by the target file that comes with
do. It is also possible
that the JTAG clock speed is wrong (it appears to be set to 500kHz,
but you don't set it explicitly).
Rick
On Mar 9, 2009, at 7:23 AM, Michael Jäntsch wrote:
Hello,
I obviously had both problems. I needed to set the vid/pid in the config
file plus the permis
the interface, the ft2232 stuff, before the target.
> I've had issues before when I configured my board before the
> interface, so see if that helps.
>
> // Dean
>
> Michael Jäntsch wrote:
>> Hi everyone,
>>
>> I am still hoping that somebody can point me i
stm32stick target, but I don't really understand why this it is not
working for me.
Is there somebody on the list who is using this Hardware with Openocd???
Thanks
Michael
Michael Jäntsch schrieb:
> Hello,
>
> I obviously had both problems. I needed to set the vid/pid in the confi
ot;a" file will show this.
>
> Then add a proper /etc/udev/rules.d/XXX file to solve this.
>
--
Technische Universität München
Michael Jäntsch
Fakultät für Informatik
Robotics and Embedded Systems
Boltzmannstr. 3
85748 Garching bei München
michael.jaent...@in.tum.de
www6.in.tum.
D JTAG TINY"
> # ^ that's the string
> # from my "lsusb -v | grep" command
> ft2232_layout olimex-jtag
> ft2232_vid_pid 0x15ba 0x0004
> # ^ that's the hex constanst
> #
chip.
Thanks a million
Michael
--
Technische Universität München
Michael Jäntsch
Fakultät für Informatik
Robotics and Embedded Systems
michael.jaent...@in.tum.de
www6.in.tum.de
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
