Unfortunately, this version hangs again. You have to start multiple concurrent
file transfers on a single interface or aggregate two interfaces to hit it. In
the latter case, you can hit it even with iperf after just a few minutes.
Yannis
John Martin wrote:
Stephen Whyte wrote:
Hi,
Is it difficult to get pro engineer running on opensolaris.
Which version of Wildfire and this is for x64, right?
The only issue with a standard installation may be the Motif libraries
are missing. Make certain you load package SUNWmfrun.
I h
Stephen Whyte wrote:
Hi,
Is it difficult to get pro engineer running on opensolaris.
Which version of Wildfire and this is for x64, right?
The only issue with a standard installation may be the Motif libraries
are missing. Make certain you load package SUNWmfrun.
___
Hi,
Is it difficult to get pro engineer running on opensolaris.
Br
Stephen
--
This message posted from opensolaris.org
___
opensolaris-discuss mailing list
opensolaris-discuss@opensolaris.org
r...@osol:/# netserver -h
-bash: /usr/bin/netserver: Invalid argument
r...@osol:/# uname -a
SunOS osol 5.11 snv_127 sun4v sparc SUNW,T5440 Solaris
Any chance you're trying to run an x86 executable on sparc? What does
'file /usr/bin/netserver' say?
-Artem
___
Did you read this reply in this thread?
http://opensolaris.org/jive/thread.jspa?threadID=118144&tstart=0
--
This message posted from opensolaris.org
___
opensolaris-discuss mailing list
opensolaris-discuss@opensolaris.org
I am trying to use the crossbow vitual wire demo tool based on following
instruction:
http://wikis.sun.com/display/OpenSolaris/vWireExample
It is using the "netperf" tool , which I download/installed on my test box.
However, the program won't run:
It will complain: "can't execute, Invalid argum
dennis mathews wrote:
Has anyone come across their RBAC files ( 200906 - 111b ) being
reduced from around 60-odd entries to less than 5 ? Are these files
auto-generated now by any chance ?
Below is the full contents of the files. Incidentally exec_attr still
has all it's contents. I know this be
I recently installed OpenSolaris on a M2N-LR. The board has several
PWM fan plugs, but they don't seem to be working.
Under Linux, the case fans would slow down after booting. After
installing snv_125, the fans have been running at full speed.
Is there a package that I need to install to get the
But we tried the same thing on onboard e1000g (e1000g0 and e1000g1)
ifconfig e1000g0 unplumb
ifconfig e1000g0 plumb
Though the failover is not happening atleast it not resulting in floater
interfaces , are there any configuration files to edit for
not creating additional interfaces during this kin
Hi,
I've noticed that my while my Ultra 20 is a lot faster on graphics rendering,
no surprise with an Nvidia GeForce 8400 card, that with the original
single-core Opteron chip it was slower at multi-tasking than my SB 2000. I had
to upgrade it to a 2.4Ghz dual-core Opteron before it became snap
--- On Fri, 11/13/09, Alan Coopersmith wrote:
> What older PCI-E boards would it replace? The only PCI-E graphics
> cards Sun ever sold for SPARC workstations were the XVR-300
> for 2D users and the XVR-2500 for 3D users.
>
Odd, the XVR-200 was the PCI-E (x1) 32 VRAM graphics card used for
I'm guessing a bit here (as I'm not 100% certain how these files are
generated or delivered), but according to what I think are the "source"
files:
http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/lib/libsecdb/prof_attr.txt
http://src.opensolaris.org/source/xref/onnv/onnv-g
Hi,
Is there anyone know the download link for ntfs_reader?
http://hub.opensolaris.org/bin/view/Community+Group+edu/ntfs_reader
--
Thanks,
Michael
___
opensolaris-discuss mailing list
opensolaris-discuss@opensolaris.org
14 matches
Mail list logo