Dear All,
I am facing some issues while trying to enable SRIOV interfaces with OpenStack
Pike.
I am using Solarflare NICs. In my case I have done all the required
configurations as stated in :
But on starting the sriov-nic-agent, I am getting following error:
neutron-sriov-nic-agent
Hi Moshe,
Thank you very much for figuring it out. It works now, Just had to restart the
sriov-agent.
Kind Regards,
Navdeep
From: Moshe Levi <mosh...@mellanox.com>
Sent: 02 May 2018 18:26
To: Navdeep Uniyal <navdeep.uni...@bristol.ac.uk>; OpenStack Mailing List
<openstack@list
Dear all,
I am trying to enable the SRIOV interfaces in my openstack Pike installation. I
am following the guide:
https://docs.openstack.org/neutron/pike/admin/config-sriov.html
I am getting following error in neutron while doing so:
2018-05-02 17:08:19.492 75833 ERROR
Hi Guru,
It should be auth_url. Please see the highlighted error below.
Regards,
Navdeep
From: Guru Desai
Sent: 06 March 2018 16:41
To: OpenStack Mailing List
Subject: [Openstack] [Pike] [Nova] Error : ERROR : MissingRequiredOptions: Auth
Thanks James,
I could figure out and resolved it by disabling port security.
Regards,
Navdeep
From: James Denton <james.den...@rackspace.com>
Sent: Sunday, February 11, 2018 8:59:22 PM
To: Navdeep Uniyal; OpenStack Mailing List
Subject: Re: [Openstack] R
Dear all,
I am trying to create a network chain manually of VMs in openstack by entering
the routing table entries in the machines. However, it doesn't seems to work.
The network between the VMs is VLAN network on top of provider network.
Scenario is like : A-->B-->C
I have enabled the IP
Hi Guru,
Check this link: https://docs.openstack.org/pike/install/
Regards,
Navdeep
From: Guru Desai [mailto:guru...@gmail.com]
Sent: 30 January 2018 14:58
To: OpenStack Mailing List
Subject: [Openstack] Openstack manual setup
Hello,
I plan to setup openstack
Uniyal <navdeep.uni...@bristol.ac.uk>; openstack@lists.openstack.org
Subject: RE: [Openstack] Openstack SRIOV and PCI passthrough error while
creating instance
Hi Nadepp,
I am not familiar with Intel NIC (I work at Mellanox)
Maybe the intel folks in the mailing list can help you.
From: N
advise if this driver is required to be running
or not.
Best Regards,
Navdeep
From: Moshe Levi [mailto:mosh...@mellanox.com]
Sent: 29 January 2018 09:30
To: Navdeep Uniyal <navdeep.uni...@bristol.ac.uk>; openstack@lists.openstack.org
Subject: RE: [Openstack] Openstack SRIOV and PCI passt
,
Navdeep Uniyal
From: Moshe Levi [mailto:mosh...@mellanox.com]
Sent: 29 January 2018 06:50
To: Navdeep Uniyal <navdeep.uni...@bristol.ac.uk>; openstack@lists.openstack.org
Subject: RE: [Openstack] Openstack SRIOV and PCI passthrough error while
creating instance
Hi Navdeep,
The erro
Dear All,
I am getting an error while creating SRIOV enabled instances following the
guide from Openstack pike
https://docs.openstack.org/neutron/pike/admin/config-sriov.html
I want to start an instance on openstack pike with SRIOV enabled NICs. However,
I am getting a Libvirt error
on-ip-prefix 10.0.0.6/32 --protocol icmp FC1"
But using tcpdump on vm2 ingress port, I could not see any traffic. Please let
me know how can I debug this and what could be the possible issue.
Best Regards,
Navdeep Uniyal
From: Cathy Zhang [mailto:cathy.h.zh...@huawei.com]
Sent: Dienstag, 1
enario?
Best Regards,
Navdeep Uniyal
Email: navdeep.uni...@neclab.eu<mailto:navdeep.uni...@neclab.eu>
-
Software Engineer
NEC Europe Ltd.
NEC Laboratories Europe
Kurfürstenanlage 36, D-69115 Heidelberg,
NEC Europe Ltd | Registered Office: Athene, Odys
13 matches
Mail list logo