Hey all... This might be one of those that just can't be done...
Ok... I have a DLink 451 (HSDPA hotspot wireless router) that I have setup as 192.168.1.1 w/ DHCP off (all the computers have set IPs). I also have a ancient linksys befw11s4 wireless. In a perfect world I want to have the linksys act as an AP for the printer (yes it is networkable) and the dlink connect to the world. All of the computers would connect via the dlink, but be able to print by sending via cups to 192.168.1.1/2 Now I found a couple of ideas on how to do it: I set the linksys to 192.168.1.2, both the routers are on channel 1. One place I've run into problems is that the howtos I've found all say that the essid's have to be different. So say, the dlink's essid is route1, and linksys is route2. The problem with this is the network card setup requires an essid in order to use WEP. If I use route1 then it can't see route2. The easiest way to do it is to buy a second wireless card and set the linksys as 192.168.0.1, but I would rather get it to work without the this way. Any ideas be appreciated... -- Quis custodiet ipsos custodes “To announce that there must be no criticism of the president, or that we are to stand by the president, right or wrong, is not only unpatriotic and servile, but is morally treasonable to the American public.” [Theodore Roosevelt] 1918 Adolph & Sharon Weidanz SuSE 10.1 '78 43' Endeavour Ketch [EMAIL PROTECTED] Team 45 S/V Time To Paws -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]