On Tuesday 13 November 2007 16:34, Ed McCanless wrote:
...
> P.S. I just installed 10.3 on my second drive. It recognized the
> resolution capabilities of the monitor, and runs with 1024x768. I can
> deal with the lesser resolution on 10.1 until I get everything moved to
> 10.3.
The xorg 6.9 in
Ed McCanless wrote:
> Rajko M. wrote:
>
>> On Friday 09 November 2007 11:01:00 pm Ed McCanless wrote:
>>
>>
>>> So, my next question is: Could I obtain the proper mode lines by
>>> removing the card and using sax2 to generate a new xorg.conf file, since
>>> sax2 did this properly before
Rajko M. wrote:
> On Friday 09 November 2007 11:01:00 pm Ed McCanless wrote:
>
>> So, my next question is: Could I obtain the proper mode lines by
>> removing the card and using sax2 to generate a new xorg.conf file, since
>> sax2 did this properly before I added the new card?
>>
>
> You c
Rajko M. wrote:
> On Friday 09 November 2007 11:01:00 pm Ed McCanless wrote:
>
>> (--) NVIDIA(0): Interlaced video modes are supported on this GPU
>> (--) NVIDIA(0): Connected display device(s) on GeForce FX 5500 at
>> PCI:1:0:0: (--) NVIDIA(0): @@@ (CRT-0)
>> (--) NVIDIA(0): @@@ (CRT-0): 35
On Saturday 10 November 2007 01:37:30 am Ed McCanless wrote:
...
> Sorry; that was Rajko's suggestion I referred to.
> Resolution change was still rejected, and when I re-booted, Rajko's
> message was gone. Guess I should have closed T-bird before I did that.
> Will try something else tomorrow (la
Ed McCanless wrote:
> Ben Kevan wrote:
>
>>> This indicates to me that NVIDIA could not recognize the monitor at all
>>> (except that it is there.)
>>>
>>> Note the line "(II) NVIDIA(0): NVIDIA GPU GeForce FX 5500 at PCI:1:0:0
>>> (GPU-0)." I have AGP (unless pci and agp slots are interchangeab
Ben Kevan wrote:
>> This indicates to me that NVIDIA could not recognize the monitor at all
>> (except that it is there.)
>>
>> Note the line "(II) NVIDIA(0): NVIDIA GPU GeForce FX 5500 at PCI:1:0:0
>> (GPU-0)." I have AGP (unless pci and agp slots are interchangeable.
>> Maybe I should examine th
>
> This indicates to me that NVIDIA could not recognize the monitor at all
> (except that it is there.)
>
> Note the line "(II) NVIDIA(0): NVIDIA GPU GeForce FX 5500 at PCI:1:0:0
> (GPU-0)." I have AGP (unless pci and agp slots are interchangeable.
> Maybe I should examine the card more closely.
On Friday 09 November 2007 11:01:00 pm Ed McCanless wrote:
> (--) NVIDIA(0): Interlaced video modes are supported on this GPU
> (--) NVIDIA(0): Connected display device(s) on GeForce FX 5500 at
> PCI:1:0:0: (--) NVIDIA(0): @@@ (CRT-0)
> (--) NVIDIA(0): @@@ (CRT-0): 350.0 MHz maximum pixel clock
Rajko M. wrote:
> On Friday 09 November 2007 05:19:14 pm Rajko M. wrote:
>
>
>> Somewhat spartan Section "Modes".
>> You can comment out that line too, like this:
>> # Modeline "800x600" 38.34 800 832 928 1024 600 604 608
>> 624 -HSync -VSync
>>
>
> Trigger finger :-) it wasn't fin
On Friday 09 November 2007 05:19:14 pm Rajko M. wrote:
> Somewhat spartan Section "Modes".
> You can comment out that line too, like this:
> # Modeline "800x600" 38.34 800 832 928 1024 600 604 608
> 624 -HSync -VSync
Trigger finger :-) it wasn't finished.
Commenting out the line will a
On Thursday 08 November 2007 11:05:06 pm Ed McCanless wrote:
> Rajko M. wrote:
> > SaX2 or Xorg can refuse to load some resolution that is too high for
> > monitor physical capabilities. Check other 2 tabs for horizontal and
> > vertical synchronization ranges and monitor physical size.
>
> Freq. 3
Rajko M. wrote:
>
> SaX2 or Xorg can refuse to load some resolution that is too high for monitor
> physical capabilities. Check other 2 tabs for horizontal and vertical
> synchronization ranges and monitor physical size.
>
Freq. 30 - 70hz horizontal
50 - 160hz vertical
Bandwidth 10
On Thursday 08 November 2007 07:55:23 pm Ed McCanless wrote:
> Rajko M. wrote:
> > On Thursday 08 November 2007 06:55:36 am Ed McCanless wrote:
> >> Just installed FX 5500 AGP , system Suse 10.1, and resolution was
> >> changed to 800 x 600. This happens because I have an old KDS monitor
> >> which
On Thursday 08 November 2007 06:55:36 am Ed McCanless wrote:
> Just installed FX 5500 AGP , system Suse 10.1, and resolution was
> changed to 800 x 600. This happens because I have an old KDS monitor
> which has to be set manually to the same config. as KDS - xf-70.
> This time when I reset the res
Just installed FX 5500 AGP , system Suse 10.1, and resolution was
changed to 800 x 600. This happens because I have an old KDS monitor
which has to be set manually to the same config. as KDS - xf-70.
This time when I reset the resolution using Yast, the settings were
displayed as being changed, but
16 matches
Mail list logo
