Dňa Thursday 11 October 2007 20:24:07 JJB ste napísal:
Stanislav Visnovsky wrote:
Dňa Thursday 11 October 2007 01:08:10 JJB ste napísal:
Ok, trying to figure out how to bond the network cards on SUSE into one.
Have you tried: YaST - Network Devices - Network Card
Press 'Add'
Select
Dňa Thursday 11 October 2007 01:08:10 JJB ste napísal:
Ok, trying to figure out how to bond the network cards on SUSE into one.
Have you tried: YaST - Network Devices - Network Card
Press 'Add'
Select 'Bond' as Device Type.
HTH
Stano
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional
Stanislav Visnovsky wrote:
Dňa Thursday 11 October 2007 01:08:10 JJB ste napísal:
Ok, trying to figure out how to bond the network cards on SUSE into one.
Have you tried: YaST - Network Devices - Network Card
Press 'Add'
Select 'Bond' as Device Type.
HTH
Stano
Hi Stano,
Under
Ok, trying to figure out how to bond the network cards on SUSE into one.
Man page for ifcfg-bonding says:
To setup a bonding interface you need a configuration file
ifcfg-bondX with the usual network settings.
But you must add additional variables
Ok, I need a configuration file. Where
Here's a copy from one of my configurations:
BOOTPROTO='static'
BROADCAST='172.17.6.255'
IPADDR='172.17.6.192'
MTU='1500'
NETMASK='255.255.255.0'
NETWORK='172.17.6.0'
REMOTE_IPADDR=''
STARTMODE='onboot'
BONDING_MASTER='yes'
BONDING_MODULE_OPTS='mode=balance-rr miimon=100'
Michael Kershaw wrote:
Here's a copy from one of my configurations:
BOOTPROTO='static'
BROADCAST='172.17.6.255'
IPADDR='172.17.6.192'
MTU='1500'
NETMASK='255.255.255.0'
NETWORK='172.17.6.0'
REMOTE_IPADDR=''
STARTMODE='onboot'
BONDING_MASTER='yes'
BONDING_MODULE_OPTS='mode=balance-rr miimon=100'
On Oct 10 2007 16:42, JJB wrote:
Thanks Michael. Does the ifcfg-bondX go in the same folder as
the ifcfg-eth-XXX file?
It goes into the same _directory_, yes.
What does the X stand for, and what is the
filename syntax for he ifcfg-bond file?
Any arbitary number. The format is
Thanks everybody, it was pretty simple to get working with your help.
Thanks,
- Joel
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
