Is the message 'set ssid' failed normal?
Latest trunk on Asus WL500GP v1.
r...@openwrt:/# wifi
Command 'set ssid' failed: -1
r...@openwrt:/# dmesg | grep corerev
wl0: wlc_attach: chiprev 2 coreunit 0 corerev 9 cccap 0x640009 maccap
0x0 band 2.4G, phy_type 2 phy_rev 7 ana_rev 3
r...@openwrt:/# cat
Hello Manuel,
On Monday 19 April 2010 10:37:42 Manuel Lauss wrote:
Florian,
On Sat, Apr 17, 2010 at 2:23 PM, Florian Fainelli flor...@openwrt.org
wrote:
However, this is not the case and I need to
bisect what was wrong from 2.6.30 to 2.6.32, this is where
Hi,
Some kernel parameters can be configured in 'make menuconfig', but not all of
them. The full configuration is in 'make kernel_menuconfig', but its content
differs from the other one. What happens if they are configured differently?
Regards
K. Gy.
Hello,
I'm working on patch to add two new configuration options for opkg
in the menuconfig. These are OPKG_ENABLE_CURL and OPKG_ENABLE_GPG.
A problem occurs when enabling OPKG_ENABLE_CURL and therefore enabling
the compile flag --enable-curl, the package does not compile properly.
The last
On 2010-04-19 11:40 PM, RHS Linux User wrote:
Hi All,
rant
This whole config business IMHO is a real mess!
I disagree, it just takes a bit of getting used to.
Can someone clarify what happens with target config, and whatever other
.configs that happen to be around somewhere?
It
Yes it is normal..
I have looked in to this issue myself.
It occurs because the interfaces are configured twice
Once by the the init scripts and then again by hotplug.
There is a little bit of a race condition and usually the second
configuration is being performed
on an interface that is already
$ ls -l bin/s3c24xx/
总用量 114196
...
-rw-r--r-- 1 aaron aaron 5226500 2010-04-20 00:15
openwrt-s3c24xx-root.jffs2-16k
...
# tftp 3300 rootfs.jffs2
TFTP from server 192.168.1.102; our IP address is 192.168.1.188
Filename 'rootfs.jffs2'.
Load address: 0x3300
Loading:
Hello!
I noticed that on my DIR-615C1 kamikaze prints the following mtd layout:
m25p80 spi0.0: s25sl032a (4096 Kbytes)
6 cmdlinepart partitions found on MTD device spi0.0
Creating 6 MTD partitions on spi0.0:
0x-0x0002 : u-boot
0x0002-0x0003 : config