On Mon, 21 Mar 2011 13:36:47 -0400
Stefan Monnier wrote:
> > the disabling is being done deliberately to give users a chance /
> > force them to clean up the overlay after a reflash.
>
> So this test is only for the `overlay' case, not the new "option
> target /" case, right?
>
>
No, it's for
When restoring to default settings by erasing the jffs partition (mtd
-r erase rootfs_data), I get a kernel oops after reset (see output
below). This is also evident when "restoring factory defaults" via LuCI
(as this erases rootfs_data I believe).
I'm running on a Ralink RT3052 board with th
On Mon, 21 Mar 2011 08:10:50 +0100, Helmut Schaa
wrote:
Am Montag, 21. März 2011 schrieb Layne Edwards:
This patch adds WLAN LED support to the mac80211 driver for Ralink
rt2x00/rt2800 (rt305x) SoC devices. The current driver in
kmod-rt2800-lib is based upon PCI, not SoC. The WLAN LED driver
I've run into this strange problem that if I use opkg to install
mgetty then the files in /etc/mgetty+sendfax/ get set with the
correct permissions (0600). However if I build mgetty into the image
and do a clean flash then the permissions revert to providing read and
write permissions to non root
in actual trunk, when i compile for ar71xx (TP-Link1043ND) with
kernel-modules ->
-> wireless drivers
-> kmod-ath
-> configuration
-> YES "Force Atheros drivers to respect the user's regdomain settings"
in /etc/config/wireless i set:
option 'channel' '12'
option 'country' 'JP'
option 'txpowe