Hi, all,
I'm studying openwrt-10.03(backfire).
I compile a kernel uImage and setup a rootfs with mkfs.jffs2 for my
board.
Now I can burn the rootfs.jffs2 onto NAND flash /mtd/mtdblock1
partition, then I can tftpboot the kernel uImage and mount the
/dev/mtdblock1.
Here the OpenWRT
On Wednesday 25 May 2011 22:11:13 Lars Hjersted wrote:
Update version of strongswan4 package from 4.5.1 to 4.5.2.
Add new strongswan4 plugins: coupling, duplicheck, whitelist.
Add strongswan4-libfast package and make build dependencies on
clearsilver and fcgi conditional. Previously
On Wednesday 27 April 2011 16:07:26 Justus Winter wrote:
---
utils/mg/Makefile | 10 +-
1 files changed, 5 insertions(+), 5 deletions(-)
Applied in r27093, thanks!
--
Florian
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On Monday 30 May 2011 14:13:43 Adam Chasen wrote:
Signed-off-by: Adam Chasen (a...@chasen.name)
Applied in r27094, thanks!
--
Florian
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
Hi,
I am having some problems getting some of the functions work on my
ralink3052 platform.
===
Problem 1. The Reset button doesn't work.
The settings for GPIO are
#define WIWI300N_GPIO_BUTTON_RESET10
#define
On 5/31/11 10:48 AM, Peter Wagner wrote:
Am Dienstag, 31. Mai 2011, 17:52:58 schrieb Philip Prindeville:
On 5/30/11 4:00 PM, Peter Wagner wrote:
Hi,
while i was reading some init files i stumbled upon this:
/sbin/wifi detect /etc/config/wireless
grep -qs config /etc/config/wireless {
On Fri, 3 Jun 2011 10:03:36 +0800, HP Teoh wrote:
==
Problem 2: WiFi LED always stays solid green. Does anybody know how it can be
modified to blink/flash based on activity? I have tried to change the trigger
Hi Lanyne,
Thanks for the wifi led configuration. Any idea about the reset button not
working and method to insert 2nd mac for vlan?
Thanks and Regards.
-Vincent
On Fri, Jun 3, 2011 at 11:10 AM, Layne Edwards ledwa...@astrumtech.netwrote:
On Fri, 3 Jun 2011 10:03:36 +0800, HP Teoh wrote:
On 31/05/2011 4:45 AM, Tim Fletcher wrote:
answer is roll your own build?
roll your own build
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
On Fri, 3 Jun 2011 12:01:55 +0800, HP Teoh wrote:
Hi Lanyne,
Thanks for the wifi led configuration. Any idea about the reset button not
working and method to insert 2nd mac for vlan?
Thanks and Regards.
-Vincent
Vincent,
For your MAC issue:
The current ethernet and switch
What board/router are you using?
Its a unbranded chinese Ralink SOC RT3052
What image did you flash?
I checked out trunk, built it on a local machine and then flahsed
openwrt-ramips-rt305x-uImage.bin and
openwrt-ramips-rt305x-root.squashfs.
The patches in question can be found at
toolchain/gcc: upgrade Linaro GCC to 4.5-2011.05-0
Signed-off-by: Mark Mentovai m...@moxienet.com
linaro_4.5-2011.05-0.patch
Description: Binary data
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On Fri, Jun 3, 2011 at 12:42 PM, Layne Edwards ledwa...@astrumtech.netwrote:
On Fri, 3 Jun 2011 12:01:55 +0800, HP Teoh wrote:
Hi Lanyne,
Thanks for the wifi led configuration. Any idea about the reset button not
working and method to insert 2nd mac for vlan?
Thanks and Regards.
13 matches
Mail list logo