I would like to add a new package that enables the use of openvpn
connections as netifd interfaces.
Each openvpn instance is then treated as a virtual network interface
which simplifies the usage, especially
with firewalling, re-configuration of network interfaces (ifdown ifup
sequences) etc.
I ha
Hello,
> I have created a bundle with the required files (quite a lot, because of
> many up- down- connect- and disconnect- scripts) here:
> http://www.schlipper.net/openwrt/openvpn-interface.tgz
Its password protected which is surely wrong.
With best regards
Christoph
--
Linux User Group Wern
* Nathan Hintz [14.01.2013 11:05]:
> - swapon "$zram_dev"
> + swapon -p 0 "$zram_dev"
this breaks zram for now, because we compile
the busybox-swaponoff without support for "p".
the patch is OK, but can please somebody switch on the
support for "p" for all images?
bye,
Hello all
I'm trying to flash OpenWrt to an old D-Link DIR-300 router. The router
has contained DD-WRT already (not stock firmware), so I assume that its
RedBoot listens at 192.168.1.1 when booting.
However, I tried many times with "telnet 192.168.1.1 9000" and cannot
get in. The error is al
Sorry, I had a typo. correct link is:
http://www.schlipper.net/OpenWRT/openvpn-interface.tgz
Joachim
Am 14.01.2013 11:01, schrieb Christoph Thielecke:
> Hello,
>
>> I have created a bundle with the required files (quite a lot, because of
>> many up- down- connect- and disconnect- scripts) here:
>
* Nguyễn Hồng Quân [14.01.2013 11:53]:
>
> I'm trying to flash OpenWrt to an old D-Link DIR-300 router. The
please use
http://wiki.openwrt.org/toh/d-link/dir-300#with.dir300-flash.sh.shell.script
the link is dead, but it's in the feed:
package/feeds/packages/dir300-flash
bye, bastian
_
Hello Joachim :)
Dne 14.1.2013 10:53, Joachim Schlipper napsal(a):
> Is it possible for me to get svn write access
> for that package, so I can maintain the package in the future? Who is
> the one to talk to about that?
why don't you send a patch to mailing list according to SubmittingPatches gui
Hello Jiri,
Am 14.01.2013 12:05, schrieb Jiri Slachta:
> why don't you send a patch to mailing list according to
> SubmittingPatches guide (
> https://dev.openwrt.org/wiki/SubmittingPatches )? You do not need to
> have write access, and this practice is quite good - everyone can test
> your packag
Hello Joachim
Dne 14.1.2013 12:20, Joachim Schlipper napsal(a):
> Hello Jiri,
>
> Thank you for your suggestion. I never considered it to be a patch
> because it doesn't change anything existing. As it is a whole new
> package I guessed it would not be a patch, but rethinking it after your
> comm
* Nathan Hintz [14.01.2013 11:05]:
> - swapon "$zram_dev"
> + swapon -p 0 "$zram_dev"
i just stumbled over the fact, that target atheros 23xx
has no support for swap activated and is still at kernel v3.3.8.
CONFIG_SWAP=y
make kernel_menuconfig
General setup ---> [*] Sup
* Nathan Hintz [14.01.2013 11:05]:
> Insures zram swap is higher priority than any swap added by block-mount;
> which is not the case if zram swap is restarted for any reason
> (e.g., /etc/init.d/zram restart).
>
> Signed-off-by: Nathan Hintz
>
> Index: package/zram-swap/files/zram.init
> =
Hi all,
I have an ADB P.DGA4001N, but it is a different hardware than what is
described in the wiki (http://wiki.openwrt.org/toh/adb/p.dg_a4001n1).
What I get in the console at boot time after unsuccessful flashing is:
CFE version 1.0.37-106.24 for A4001N TEF 0001 BCM96328 (32bit,SP,BE)
Build Dat
You may also want to look at tools like Coovachilli, wifidog, and
nodogsplash if you want to constrain upload/download bandwidth for
individual DHCP clients. These are the tools commonly used to manage
bandwidth on public wifi hotspots.
http://wiki.openwrt.org/doc/howto/wireless.hotspot
http://wi
On Mon, 2013-01-14 at 11:25 +0100, Bastian Bittorf wrote:
> * Nathan Hintz [14.01.2013 11:05]:
>
> > - swapon "$zram_dev"
> > + swapon -p 0 "$zram_dev"
>
> this breaks zram for now, because we compile
> the busybox-swaponoff without support for "p".
>
> the patch is OK, but
Hi list,
I wrote a small C utilitiy that I want to compile into an openwrt package.
I tried to find my way through the somewhat confusing documentation on the wiki
and the 'net over the weekend, but couldnÄt get anything working. Now for a
more systematic approach:
1. I downloaded and unpacke
Hi Bastian,
I tried that script but failed at "Waiting for the wireless router…"
(infinite waiting).
The scripted start from "looking for factory bootloader" step but as I
told, the router has had DD-WRT already. This means factory bootloader
was replaced.
I wonder if the time for RedBoot to
Add BeiMan HA910_BizN and HA910_N support.
Signed-off-by: Kicer Jiao
---
Index: target/linux/brcm63xx/image/Makefile
===
--- target/linux/brcm63xx/image/Makefile(revision 35162)
+++ target/linux/brcm63xx/image/Makefile
Insures zram swap is higher priority than any swap added by block-mount;
which is not the case if zram swap is restarted for any reason
(e.g., /etc/init.d/zram restart).
v2 - Default CONFIG_FEATURE_SWAPON_PRI to 'y'
Unfortunately, this adds an additional ~2.1K to the size of busybox.
Signed-off-
18 matches
Mail list logo
