Hi John,
May I take up your offer of a hand with overlayfs on top of ubi?
I have in fact managed to get a working overlay + ubi image,
and also a ubifs image. But I still have a few questions:
- Am I right in thinking that there is no way to concatenate the
kernel and ubi image and have them sp
Signed-off-by: Claudio Leite
---
target/linux/ramips/image/Makefile | 12 +-
tools/firmware-utils/Makefile | 1 +
tools/firmware-utils/src/mkheader_gemtek.c | 211 +
3 files changed, 223 insertions(+), 1 deletion(-)
create mode 100644 tools/fir
Signed-off-by: Claudio Leite
---
target/linux/ramips/dts/AR725W.dts | 113 +
target/linux/ramips/image/Makefile | 3 +
target/linux/ramips/rt288x/config-3.10 | 1 +
3 files changed, 117 insertions(+)
create mode 100644 target/linux/ramips/dts/AR725W.dt
Signed-off-by: Claudio Leite
---
target/linux/ramips/base-files/etc/diag.sh | 3 +++
target/linux/ramips/base-files/etc/uci-defaults/01_leds| 3 +++
target/linux/ramips/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ramips/base-files/lib/ramips.sh | 3
The Airlink101 AR725W is a RT2880 router with 32MB RAM, 4MB flash,
100mbit IP175E switch and dual-band 802.11n wireless.
Notes:
- I couldn't get the switch to be recognized without building
it into the kernel, rather than as a module. Since the driver
has it attached to the ethernet port, it n
A difference in tx power like that is usually caused by the presence of an
external power amplifier on the board between the SoC and the antenna that
isn't getting turned on, or otherwise misconfigured.
Cheers,
Owen
On Sunday, April 20, 2014, Matthias Schiffer
wrote:
> Hi,
> I recently contribu
Hi,
I recently contributed the patches to support the TL-WR841 v9, and I'm
getting reports that the TX quality of these devices is terrible on
OpenWrt (RX looks fine).
iwinfo reports Tx-Power: 19 dBm, and in the next room I get about -80
dBm when the device is running OpenWrt, while I get about -6
this script is mostly sourced, so we should try to keep the pollution
of the users environment as low as possible. make the var 'tmp' local
Signed-off-by: Bastian Bittorf
---
sh/jshn.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sh/jshn.sh b/sh/jshn.sh
index b3cd43c..06b
P-2812HNU-Fx images are already supported but not generated.
Signed-off-by: Álvaro Fernández Rojas
---
diff --git a/package/boot/uboot-lantiq/Makefile
b/package/boot/uboot-lantiq/Makefile
index f2c1c62..a7d5916 100644
--- a/package/boot/uboot-lantiq/Makefile
+++ b/package/boot/uboot-lantiq/Makef
Fritz!Box 3370 images are already supported but not generated.
Signed-off-by: Álvaro Fernández Rojas
---
diff --git a/package/boot/uboot-lantiq/Makefile
b/package/boot/uboot-lantiq/Makefile
index ac2365d..f2c1c62 100644
--- a/package/boot/uboot-lantiq/Makefile
+++ b/package/boot/uboot-lantiq/Mak
Fixes package refreshing.
Signed-off-by: Álvaro Fernández Rojas
---
diff --git a/package/boot/uboot-lantiq/Makefile
b/package/boot/uboot-lantiq/Makefile
index f215eee..ac2365d 100644
--- a/package/boot/uboot-lantiq/Makefile
+++ b/package/boot/uboot-lantiq/Makefile
@@ -241,6 +241,7 @@ endef
de
Depend on lantiq board.
ARV7510 depends on ARV4510 because (according to OpenWrt wiki) both boards are
identical except for the unsupported WiFi. Moreover, ARV7510 isn't
especifically supported and ARV4510 images valid.
Signed-off-by: Álvaro Fernández Rojas
---
diff --git a/package/boot/uboot-
Hello everyone,
We want to make a WIFI music device use RT5350, but the I2S function is not
enable in the openwrt.
So I want to change the pinmux to enable the I2S, but when I search the
struct rt_gpio_pinmux in the
openwrt, I could not find any reference of the struct, so have no idea for
On Thu, Apr 17, 2014 at 12:07:31AM +0200, Zoltan HERPAI wrote:
> Hi,
>
> nwf wrote:
> > Salutations, list. This patch adds configuration knobs for the in-kernel
> > kAFS
> > client and its dependencies. We have an AFS cell used for shared
> > configuration
> > files and nightly snapshots of lo
14 matches
Mail list logo
