Where did You get/find v4.16.2.4 packages ?
W dniu 2015-07-10 o 19:31, Aleksander Wałęski pisze:
Hello Martin,
I've just applied your patch against trunk (r46292) and flashed this
firmware. Unfortunately linked patch did not apply cleanly because
some of your changes were accepted into openwrt
When using DFS channels on Ath10k kernel log has warning message 'failed
to process fft', typically when under medium/heavy traffic. Ticket
https://dev.openwrt.org/ticket/19316 discusses and concludes messages
are harmless. They do still contribute to log noise, so this patch
enables them only in
Hi,
I've noticed that OpenWrt currently uses the soft-float ABI in the
Raspberry Pi images. Is there a specific reason hard float is not used,
even though most other distributions like Raspbian have switched to it?
I tried adding "fpu" to FEATURES to enable hard-float, and the generated
images see
Probably no body checked until now if it works and devs went with safe
choice. Just my 2c.
On 11 July 2015 at 18:51, Matthias Schiffer
wrote:
> Hi,
> I've noticed that OpenWrt currently uses the soft-float ABI in the
> Raspberry Pi images. Is there a specific reason hard float is not used,
> even
Le 11 juil. 2015 09:52, "Matthias Schiffer"
a écrit :
>
> Hi,
> I've noticed that OpenWrt currently uses the soft-float ABI in the
> Raspberry Pi images. Is there a specific reason hard float is not used,
> even though most other distributions like Raspbian have switched to it?
I do not think the
On 07/11/2015 07:21 PM, Florian Fainelli wrote:
> Le 11 juil. 2015 09:52, "Matthias Schiffer"
> a écrit :
>>
>> Hi,
>> I've noticed that OpenWrt currently uses the soft-float ABI in the
>> Raspberry Pi images. Is there a specific reason hard float is not used,
>> even though most other distributio
This syncs the dts file with the one provided by the wrtnode team:
https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch
Signed-off-by: Christian Mehlis
---
target/linux/ramips/dts/WRTNODE.dts | 12
1 file changed, 12 insertions(+)
diff --
Hi John,
> I have to enable NAT with a MASQUERADING target,
> and to block the GUI from WAN have to server bind only the bridge address.
> Could anyone tell me how i can do it in the GUI itself.
You should probably ask this kind of questions on the openwrt-users mailing
list:
https://lists.openw
build error:
cfns.gperf:101:1: error: 'gnu_inline' attribute present on 'libc_name_p'
cfns.gperf:26:14: error: but not here
observed on Arch Linux
affected versions gcc 4.6, gcc 4.7
reported & fixed in DragonFlyBSD issue #136
https://github.com/DragonFlyBSD/DPorts/issues/136
Signed-off-by: Dirk
Hi,
I'm trying to activate the Device Tree for Raspberry Pi builds.
Therefore I changed the flag
# CONFIG_BCM2709_DT is not set
to
CONFIG_BCM2709_DT=y
in
/home/mine/gitrepos/openwrt2/target/linux/brcm2708/bcm2709/config-default
and
/home/mine/gitrepos/openwrt2/target/linux/brcm2708/bcm2708/co
10 matches
Mail list logo
