Hi,
I've noticed that mailman uses the timestamp in the email (which in the
case of git format-patch is the timestamp of the commit) when adding
emails to the archive list, rather than actual time the email arrived at
the mailing list.
This is probably not ideal since it means email in the a
My testbed's memory is 512MB, but the memory showed to us is 448MB( init as
BOOT_MEM_RAM) and the high memory is 0 K, why ?
And I found that if both the 448MB and other 64MB init as BOOT_MEM_RAM, the
samba(pbsam-util accelerate) service will work with a low speed
transmission(20MB/s) while it i
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/generic/profiles/pcs.mk | 26 ++
target/linux/ar71xx/image/Makefile | 4
2 files changed, 30 insertions(+)
diff --git a/target/linux/ar71xx/generic/profiles/pcs.mk
b/target/linux/ar71xx/generic/profil
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/generic/profiles/pcs.mk | 27 +++
target/linux/ar71xx/image/Makefile | 4
2 files changed, 31 insertions(+)
diff --git a/target/linux/ar71xx/generic/profiles/pcs.mk
b/target/linux/ar71xx/generic/profi
Signed-off-by: Daniel Dickinson
---
package/boot/uboot-envtools/files/ar71xx | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +++
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds| 9 +
target/linux/ar71xx/base-files/etc/uci-defaults/02_ne
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/config-4.1 | 1 +
.../814-MIPS-ath79-add-cap324-support.patch| 183 +
2 files changed, 184 insertions(+)
create mode 100644
target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-cap324-support
Signed-off-by: Daniel Dickinson
---
package/boot/uboot-envtools/files/ar71xx | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +++
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds| 6 ++
target/linux/ar71xx/base-files/etc/uci-defaults/02_netwo
Signed-off-by: Daniel Dickinson
---
package/boot/uboot-envtools/files/ar71xx | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +++
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds| 5 +
target/linux/ar71xx/base-files/etc/uci-defaults/02_networ
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/config-4.1 | 1 +
.../815-MIPS-ath79-add-cr3000-support.patch| 211 +
2 files changed, 212 insertions(+)
create mode 100644
target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-cr3000-support
Hi all,
Sorrry for all the noise; due to various issues with email and using the wrong
starting commit when creating the patch series I am sending this patch series
one last time.
This patch series is based on a Nov 2012 patch series for which permission was
granted to release, but which was n
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/config-4.1 | 1 +
.../816-MIPS-ath79-add-cr5000-support.patch| 230 +
2 files changed, 231 insertions(+)
create mode 100644
target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-cr5000-support
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/generic/profiles/pcs.mk | 26 ++
target/linux/ar71xx/image/Makefile | 4
2 files changed, 30 insertions(+)
diff --git a/target/linux/ar71xx/generic/profiles/pcs.mk
b/target/linux/ar71xx/generic/profil
On 2015-08-10 10:00 PM, Yousong Zhou wrote:
Nice catch, but only setting PKG_BUILD_DIR should be enough to fix
this. No need to introduce a new variable.
Actually the source package is used *two* places. For the download and
for PKG_BUILD_DIR. It's needed for the download because you need
On 2 August 2015 at 19:46, Daniel Dickinson
wrote:
> Packages that depend on PolarSSL fail to build because polarssl's InstallDev
> section never actually gets executed because (prior to this patch) the package
> name does not match the subdir the package is in (presumably due to upstream
> name c
With this change we let user know 5 seconds have passed and reset button
can be released (to trigger factory reset)
Signed-off-by: Rafał Miłecki
---
package/base-files/files/etc/rc.button/reset | 35 +---
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/pac
Previous patch 6f2905eeb6ce5ddec8d12d677e1f377a940b537b enabled ADM in
the kernel, which causes a kernel panic when accessing the SPI flash.
As a workaround, We'll disable DMA for the flash for now. It was not
enabled previously anyway so we'll just leave it as is.
Reported-by: Jonas Gorski
Sign
On Mon, 10 Aug 2015, John kerry wrote:
I followed the same steps and its working too. But this i want in wireless
config file, Because i dont want every time to add using GUI. So When i
connect to another router also, no need to add one more. I mean to say it
should be in default wireless config
Add support for the Black Swift board:
http://www.black-swift.com/
Took relevant parts and slightly adapted from:
https://github.com/blackswift/openwrt/blob/master/bsb.patch
Signed-off-by: Bruno Randolf
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../ar71xx/base-files/etc/uci
Add support for the Black Swift board:
http://www.black-swift.com/
Took relevant parts and slightly adapted from:
https://github.com/blackswift/openwrt/blob/master/bsb.patch
Signed-off-by: Bruno Randolf
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../ar71xx/base-files/etc/uci
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/config-4.1 | 1 +
.../815-MIPS-ath79-add-cr3000-support.patch| 211 +
2 files changed, 212 insertions(+)
create mode 100644
target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-cr3000-support
Signed-off-by: Daniel Dickinson
---
package/boot/uboot-envtools/files/ar71xx | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +++
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds| 6 ++
target/linux/ar71xx/base-files/etc/uci-defaults/02_netwo
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/generic/profiles/pcs.mk | 27 +++
target/linux/ar71xx/image/Makefile | 4
2 files changed, 31 insertions(+)
diff --git a/target/linux/ar71xx/generic/profiles/pcs.mk
b/target/linux/ar71xx/generic/profi
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/generic/profiles/pcs.mk | 26 ++
target/linux/ar71xx/image/Makefile | 4
2 files changed, 30 insertions(+)
diff --git a/target/linux/ar71xx/generic/profiles/pcs.mk
b/target/linux/ar71xx/generic/profil
Sorry, one last time; this series got concatenated into one big email.
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some t
Packages that depend on PolarSSL fail to build because polarssl's InstallDev
section never actually gets executed because (prior to this patch) the package
name does not match the subdir the package is in (presumably due to upstream
name change). As a workaround I have changed the package name bac
The v4l kernel modules fail to compile on latest kernels due to a new
dependency on a clock source. Since most routers won't have a suitable
clock source, I have added a kernel config option that omits the functionality
that requires the clock source.
That means v4l modules in OpenWrt can't sup
On RedHat/Fedora and derivatives we must use the system liblzma
from xz-devel because the liblzma in tools/xz breaks these
systems due to system tools (which use liblzma) having
missing symbols when staging_dir/host/lib has liblzma
(because buildroot puts staging_dir/host/lib first in
library load
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/generic/profiles/pcs.mk | 26 ++
target/linux/ar71xx/image/Makefile | 4
2 files changed, 30 insertions(+)
diff --git a/target/linux/ar71xx/generic/profiles/pcs.mk
b/target/linux/ar71xx/generic/profil
Signed-off-by: Daniel Dickinson
---
package/boot/uboot-envtools/files/ar71xx | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +++
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds| 9 +
target/linux/ar71xx/base-files/etc/uci-defaults/02_ne
Signed-off-by: Daniel Dickinson
---
package/boot/uboot-envtools/files/ar71xx | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +++
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds| 5 +
target/linux/ar71xx/base-files/etc/uci-defaults/02_networ
Signed-off-by: Daniel Dickinson
---
target/linux/ar71xx/config-4.1 | 1 +
.../816-MIPS-ath79-add-cr5000-support.patch| 230 +
2 files changed, 231 insertions(+)
create mode 100644
target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-cr5000-support
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some tweaks of my own.
These patches are against trunk.
Daniel Dickinson (8)
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some tweaks of my own.
These patches are against trunk.
Daniel Dickinson (8)
This patch may not actually be necessary, but adds the allnet
uboot-envtools safety checks before allow a firmware upgrade to
and Netgear WNDR3700/3800 device.
Note that the Netgear devices already have a hardware id check so
this may be superfulous.
Signed-off-by: Daniel Dickinson
---
target/l
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some tweaks of my own.
These patches are against trunk.
Daniel Dickinson (8)
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some tweaks of my own.
These patches are against trunk.
Daniel Dickinson (8)
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some tweaks of my own.
These patches are against trunk.
Daniel Dickinson (8)
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some tweaks of my own.
These patches are against trunk.
Daniel Dickinson (8)
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some tweaks of my own.
These patches are against trunk.
Daniel Dickinson (8)
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some tweaks of my own.
These patches are against trunk.
Daniel Dickinson (8)
Hi all,
I have added suport for three PowerCloud Systems devices based on
the patches posted in
https://lists.openwrt.org/pipermail/opewrt-devel/2012-Novembre/017340.html,
updated board support in the OpenWrt tree, and some tweaks of my own.
These patches are against trunk.
Daniel Dickinson (8)
This patch add support for Planex DB-WRT01. DANBOARD route on
the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio.
DANBOARD is Cartoon character.
Signed-off-by: YuheiOKAWA
---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
.../linux/ramips/base-files/etc/board.d/02_
Today I compiled with your fork and everything seemed fine at first.
After flashing to a TP-Link WDR3600 Router I can see the ovsdb-server running
and reveals the usual String ID.
When I try to add a bridge with the command does not
return
to the input prompt. After pressing ctrl+c and checking
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
This has many cases where you have added the board out of order. The
lists are generally alphabetically sorted, and should be maintained that
way, even though a few boards escaped this.
More comments inline.
Stijn Segers wrote:
> Hello,
>
> The p
I followed the same steps and its working too. But this i want in wireless
config file, Because i dont want every time to add using GUI. So When i
connect to another router also, no need to add one more. I mean to say it
should be in default wireless config file.
On Mon, Aug 10, 2015 at 6:18 PM, D
On Mon, 10 Aug 2015, John kerry wrote:
Date: Mon, 10 Aug 2015 18:10:14 +0800
From: John kerry
To: Alex Weedy ,
OpenWrt Development List
Subject: [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi
client/AP interfaces on one radio)
Firstly i configure wireless config
Firstly i configure wireless config as below:
config wifi-device 'wifi0'
option type 'qcawifi'
option macaddr '00:01:11:00:01:00'
option hwmode '11ng'
option txpower '17'
option htmode 'HT20'
option disabled '0'
option channel '1'
config wif
The miniupnpd package has been rebuilt and was uploaded to the Chaos
Calmer 15.05 Release Candicate 3 repository.
VERSION
1.9.20150609-1 => 1.9.20150609-1
CHANGELOG
[Wed, 15 Jul 2015 08:29:56 +0200 0a514a3]
Shorten OS name to silence SSDP warnings
CHANGES
miniupnpd/Makefile |2 +-
1
The netperf package has been rebuilt and was uploaded to the Chaos
Calmer 15.05 Release Candicate 3 repository.
VERSION
2.6.0-1 => 2.7.0-1
CHANGELOG
[Mon, 3 Aug 2015 18:13:58 +0200 1ee31bd]
Update to v2.7.0
[Mon, 3 Aug 2015 18:13:54 +0200 aa75904]
Adopt the netperf package.
CHANGES
net
The oonf-olsrd2 package has been rebuilt and was uploaded to the Chaos
Calmer 15.05 Release Candicate 3 repository.
VERSION
0.9.1-r1-eab3845089bc2410a3c115fb8274572b16a0e47d =>
0.9.1-r2-eab3845089bc2410a3c115fb8274572b16a0e47d
CHANGELOG
[Thu, 6 Aug 2015 21:43:33 +0200 57658db]
Unified open
The oonf-init-scripts package has been rebuilt and was uploaded to the
Chaos Calmer 15.05 Release Candicate 3 repository.
VERSION
0.9.1-r2-1 => 0.9.1-r2-1
CHANGELOG
[Thu, 6 Aug 2015 21:43:33 +0200 57658db]
Unified openwrt init files for OONF
CHANGES
REFERENCES
*
https://github.com/op
The oonf-dlep-radio package has been rebuilt and was uploaded to the
Chaos Calmer 15.05 Release Candicate 3 repository.
VERSION
0.9.1-r1-eab3845089bc2410a3c115fb8274572b16a0e47d =>
0.9.1-r2-eab3845089bc2410a3c115fb8274572b16a0e47d
CHANGELOG
[Thu, 6 Aug 2015 21:43:33 +0200 57658db]
Unified
The oonf-dlep-proxy package has been rebuilt and was uploaded to the
Chaos Calmer 15.05 Release Candicate 3 repository.
VERSION
0.9.1-r1-eab3845089bc2410a3c115fb8274572b16a0e47d =>
0.9.1-r2-eab3845089bc2410a3c115fb8274572b16a0e47d
CHANGELOG
[Thu, 6 Aug 2015 21:43:33 +0200 57658db]
Unified
The bmx6 package has been rebuilt and was uploaded to the Chaos Calmer
15.05 Release Candicate 3 repository.
VERSION
r2015061604-4 => r2015080701-4
CHANGELOG
[Fri, 7 Aug 2015 20:44:02 +0200 c287113]
Update to latest bmx6-master branch (fix rule corruption on the fly)
CHANGES
bmx6/Makefil
The mwan3 package has been rebuilt and was uploaded to the Chaos Calmer
15.05 Release Candicate 3 repository.
VERSION
1.6-1 => 1.6-2
CHANGELOG
[Thu, 23 Jul 2015 13:51:04 +0200 75f9788]
Update to version 1.6-2
Fix malformed uci commands. (issue #1502)
CHANGES
net/mwan3/Makefile
The knxd package has been rebuilt and was uploaded to the Chaos Calmer
15.05 Release Candicate 3 repository.
VERSION
2015-03-31-2c6c6732a684dffb87b391ea92cccdf07c8385b8-1 =>
2015-07-19-be1fcfe85cc1dfcc41f791cd9a45c57fe18da6a0-1
CHANGELOG
[Sun, 26 Jul 2015 18:27:01 +0200 805c6e6]
Bump to ne
56 matches
Mail list logo