Deal all,
I am using OpenWRT Chaos Calmer (Revision: 46522).
I have the error "sending SIGSEGV to ubusd for invalid write access ..."
after upgrading luci.
I upgraded luci by these commands:
openwrt/script/feeds update
openwrt/script/feeds install luci
Do
This patch adds support for GL-MT300N.
GL-MT300N is powered by MT7620N with 16MB flash, 64MB RAM,
2 LANs, USB, UART, GPIO and PoE support.
---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 +-
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
This patches adds support for GL-MT300A.
GL-MT300A is powered by MT7620A. It has 16MB flash, 128MB RAM,
Two LANs, USB, UART and MMC daughter board.
---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
https://wiki.openwrt.org/toh/omylink/omy-x1
http://www.omylink.com/
Signed-off-by: L. D. Pinney
---
target/linux/ar71xx/base-files/etc/board.d/01_leds| 5 +++
target/linux/ar71xx/base-files/etc/board.d/02_network | 1 +
I would expect prpl had lots of discussion with Openwrt core developers
already before this. It appears that did not happen.
Intel funded the core developers for Yocto(x86), Linaro gets money from
ARM(arm), now it seems prpl is trying to better some ecosystem for mips
via Openwrt.
IMHO,
On Wed, Mar 9, 2016 at 6:30 PM, Christian Lamparter
wrote:
> lantiq on the other hand has copied the func from ar71xx and adapted
> and renamed it, but kept the signature:
> ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
> it's in arch/mips/lantiq/xway/pci-ath-fixup.c.
Update gdb to version 7.11
Signed-off-by: Hannu Nyman
---
Release notes:
https://lists.gnu.org/archive/html/info-gnu/2016-02/msg00010.html
GDB 7.11 brings new features and improvements, including:
* Per-inferior thread numbers (thread numbers are now per inferior instead
Update gdb to version 7.11
Signed-off-by: Hannu Nyman
---
Release notes:
https://lists.gnu.org/archive/html/info-gnu/2016-02/msg00010.html
GDB 7.11 brings new features and improvements, including:
* Per-inferior thread numbers (thread numbers are now per inferior instead
Update gdb to version 7.11
Signed-off-by: Hannu Nyman
---
Release notes:
https://lists.gnu.org/archive/html/info-gnu/2016-02/msg00010.html
GDB 7.11 brings new features and improvements, including:
* Per-inferior thread numbers (thread numbers are now per inferior instead
* Bump pkg-config version to 0.29.1
* Use https for the source download (http gets directed there)
Signed-off-by: Hannu Nyman
---
Release notes:
https://lists.freedesktop.org/archives/pkg-config/2016-March/001043.html
- Fixed a regression from 0.29 with unquoting values
Bump mm-macros to 0.9.10
Signed-off-by: Hannu Nyman
---
Release notes:
https://github.com/GNOME/mm-common/blob/master/NEWS
tools/mm-macros/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/mm-macros/Makefile b/tools/mm-macros/Makefile
On 2016-03-09 17:46, Kathy Giori wrote:
> Saverio and all,
>
> Let me offer a few thoughts, since I've been involved in prpl since
> the beginning, and you can either praise (preferred) or blame me for
> initiating the prplwrt PEG. :)
>
> My initial goal was simple -- improved industry-community
On 9 March 2016 at 21:24, Álvaro Fernández Rojas wrote:
> It's a temporary hack until power management issues are solved:
> https://github.com/raspberrypi/linux/commit/66ae1b1750720a33e29792a177b1e696f4f005fb
> I don't think it was submitted upstream.
Please add it using other
A re-write of the driver based on xway_nand.c and constants as
well as the cmd_ctrl() function from the original oxnas_nand.c
resulted in a extremely similar looking file (see diffsize),
and fixes the issue of NAND not being detected on newer kernels.
Signed-off-by: Daniel Golle
It's a temporary hack until power management issues are solved:
https://github.com/raspberrypi/linux/commit/66ae1b1750720a33e29792a177b1e696f4f005fb
I don't think it was submitted upstream.
El 09/03/2016 a las 21:07, Rafał Miłecki escribió:
On 9 March 2016 at 20:32, Álvaro Fernández Rojas
On 9 March 2016 at 20:32, Álvaro Fernández Rojas wrote:
> diff --git
> a/package/kernel/mac80211/patches/345-brcmfmac-Disable-power-management.patch
> b/package/kernel/mac80211/patches/345-brcmfmac-Disable-power-management.patch
> new file mode 100644
> index 000..091f175
Hi Felix,
Thank you for your feedback.
What you are saying does make sense to me, but it makes sense also to keep ipvs
together with iptables as they are both part of netfilter, which is my
preference.
I would like to hear some other opinions.
Mauro
On Wed, March 9, 2016 12:00, Felix Fietkau
- Enable SDIO support on brcmfmac.
- Disable power managment for brcm2708 target.
Signed-off-by: Álvaro Fernández Rojas
---
package/kernel/mac80211/Makefile | 1 +
.../345-brcmfmac-Disable-power-management.patch| 27 ++
As usual these patches were extracted from the raspberry repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y
- Disable unused MFD RPISENSE driver.
- Disable ethernet HW checksums in order to avoid kernel exceptions.
Signed-off-by: Álvaro Fernández Rojas
---
These patches add support for WiFi on the Raspberry Pi 3.
Log:
https://gist.github.com/Noltari/92f51259c9d18506192b#file-brcm2710_rpi3_wifi-log
Considerations:
1) No firmware files provided until licenses are clarified:
https://github.com/raspberrypi/linux/issues/1325
For now the user has to
On Wednesday, March 09, 2016 07:59:28 AM Martin Blumenstingl wrote:
> On Wed, Mar 9, 2016 at 12:14 AM, Christian Lamparter
> wrote:
> > Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway)
> > need to be able to initialize the PCIe wifi device.
On Wed, Mar 9, 2016 at 9:58 AM, Saverio Proto wrote:
>> I don't have a number off hand, that's still being decided. My feeling has
>> been that's it'd be in the tens of thousands USD total. I'll try to get more
>> of finalized amount as soon as possible.
>
> Hello Eric,
>
>
Hi any news on the new update to cc pleas. I am wating on the ath10k
firmware update for the c7v2 I no you cant give a ETA... thanks
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
From: Karl Palsson
procd from revision b12bb150ed38a4409bef5127c77b060ee616b860 supports
writing a pidfile. This adds support for setting that parameter with
standard init script hooks:
procd_set_param pidfile /var/run/someprocess.pid
Signed-off-by: Karl Palsson
On 2016-03-09 09:24, Mauro Mozzarelli wrote:
> All,
>
> I have been having conversations with John on whether to include ipvs and
> ipvsadm in
> trunk or github. Initially I did not know of github and thanks to John's
> patience now I
> have a better understanding of the differences between the
On Mon, Mar 07, 2016 at 09:02:49PM +0100, Alexander Couzens wrote:
> Based on previous patch series ubi for dockstar.
>
> To install the new ubi style on goflexnet:
> - update bootloader (use the same bootloader as of goflexhome)
> The goflexnet has a not as old SoC like the dockstar,
> which
Silence warning "daemon.notice netifd: wan6 (1139): sh: write error: Invalid
argument"
when an invalid MTU is received via RA as kernel refuses to accept IPv6 mtu
values
which are smaller than 1280 and bigger than the device mtu.
Signed-off-by: Hans Dedecker
---
On 08/03/2016 07:52, John Crispin wrote:
>
>
> On 07/03/2016 22:08, Dirk Neukirchen wrote:
>> internal jsoncpp include order leads to multiple build
>> errors on Alpine Linux which uses musl libc
>>
>> use include order from upstream jsoncpp
>>
>> first error was:
>> In file included from
Apart from using our new building system there are 2 more changes:
1) Limit amount of images
So far we were generating all common images (standard one and two with
no loader) for every SUBTARGET. This is not needed, as e.g. the only
device requiring gzipped kernel is legacy Huawei E970.
2)
RESEND: This patch is a support for Arduino Yun board "WLAN RST" button.
# sorry
Signed-off-by: Hirokazu MORIKAWA
---
.../ar71xx/files/arch/mips/ath79/mach-arduino-yun.c | 21 +
1 file changed, 21 insertions(+)
diff --git
> I don't have a number off hand, that's still being decided. My feeling has
> been that's it'd be in the tens of thousands USD total. I'll try to get more
> of finalized amount as soon as possible.
Hello Eric,
considering that a Senior Engineer in the SF Bay Area has an average
income of
All,
I have been having conversations with John on whether to include ipvs and
ipvsadm in
trunk or github. Initially I did not know of github and thanks to John's
patience now I
have a better understanding of the differences between the two.
IP Virtual server is provided by kernel modules that
32 matches
Mail list logo