All,
I wanted to let everyone know that the sessions for OpenWrt Summit have
been announced and are listed at http://openwrtsummit.org. We have a really
broad range of sessions this year that address both the technical and
industry sides of the OpenWrt/LEDE communities. I think I can speak for the
Hi Simon,
On Tue, Sep 13, 2016 at 1:13 PM, Simon Wunderlich
wrote:
> On Tuesday, September 13, 2016 10:59:31 AM CEST Valo, Kalle wrote:
>> Simon Wunderlich writes:
>> > we have done some experiments last week on ath10k, trying to run mesh
>> > (802.11s) and access point at the same time, both e
On 09/13/2016 12:24 AM, Michal Marek wrote:
> On Mon, Sep 12, 2016 at 05:12:15PM -0700, Florian Fainelli wrote:
>> Hi,
>>
>> I have a root filesystem embedding filenames that look like these:
>>
>> /lib/data/:
>>
>> these are essentially files that can be matched against an USB
>> vendor/product id
Setting the multicast_fast_leave option of a bridge allows to control
the forwarding of multicast traffic when an IGMP/MLD leave is received.
In case multicast_leave_option is enabled and a leave is received the
multicast membership will immediately be dropped on the bridge port while
in the other
Dropping hotplug event in case of interface reload results into hotplug scripts
not being being run for the interface and thus external actors not being
informed
about the actual state of the interface.
This is clearly visible if the interface auto parameter is set to disabled for
multiple interf
Interface name servers when being written to resolv.conf.auto are sorted
based on the following parameters:
-Primary sorting key is interface dns_metric; name servers having lowest
interface dns_metric are listed first
-Secondary sorting key is interface metric; in case of equal interface
dns_metri
On Tuesday, September 13, 2016 11:25:21 AM CEST Valo, Kalle wrote:
> Simon Wunderlich writes:
> > On Tuesday, September 13, 2016 10:59:31 AM CEST Valo, Kalle wrote:
> >> Simon Wunderlich writes:
> >> > we have done some experiments last week on ath10k, trying to run mesh
> >> > (802.11s) and acce
Simon Wunderlich writes:
> On Tuesday, September 13, 2016 10:59:31 AM CEST Valo, Kalle wrote:
>> Simon Wunderlich writes:
>> > we have done some experiments last week on ath10k, trying to run mesh
>> > (802.11s) and access point at the same time, both encrypted.
>> >
>> > We have tested a recen
On Tuesday, September 13, 2016 10:59:31 AM CEST Valo, Kalle wrote:
> Simon Wunderlich writes:
> > we have done some experiments last week on ath10k, trying to run mesh
> > (802.11s) and access point at the same time, both encrypted.
> >
> > We have tested a recent LEDE (reboot-1519-g42f559e) but
VR500 is Wired Router. non Wireless.
- 256MiB RAM, 64MiB SPI Flash.
- USB 3.0 x1, USB 2.0 x1
Issue: soft reboot problem. SPI Flash donot exit 4byte address mode.
Signed-off-by: YuheiOKAWA
---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 +-
.../linux/ramips/base-files/etc/board.d/02_
Simon Wunderlich writes:
> we have done some experiments last week on ath10k, trying to run mesh
> (802.11s) and access point at the same time, both encrypted.
>
> We have tested a recent LEDE (reboot-1519-g42f559e) but with
> firmware-5.bin_10.2.4.70.42-2 and the included wpa_supplicant, whic
Hello,
On 23 March 2016 at 10:53, Xue Liu wrote:
> Hello everyone,
>
> Now I am doing point to point throughput test using and ath10k. The
> hardwares are clearfog A1 board with armada 388 and WLE900VX (QCA9880). The
> OpenWRT trunk is running on it.
Could you tell what is the OpenWrt Release
Hi,
we have done some experiments last week on ath10k, trying to run mesh
(802.11s) and access point at the same time, both encrypted.
We have tested a recent LEDE (reboot-1519-g42f559e) but with
firmware-5.bin_10.2.4.70.42-2 and the included wpa_supplicant, which gave us a
working encrypted
13 matches
Mail list logo
