This small series addresses current problem with late loading of Intel
microcode in OpenWrt. Following the commit messages [1] and later
discussion, late loading off the microcode can be ineffective for some
processors [2] and for others disabled [3]. Also it is discouraged for
any processor starti
Joe Ayers [2018-11-19 19:40:34]:
Thank you for testing.
> 1) Physical ports not functional. frames are TX out, but RX not
> received back. Switch configured out-of-box OK.
Ok, at least some progress.
> 2) wlan0 is functional and works correctly. However, default for
> wifi-device is option
Mount boot file system with rw option to allow installation of packages
which install files to /boot directory.
Signed-off-by: Tomasz Maciej Nowak
---
.../linux/x86/base-files/lib/preinit/79_move_config | 12
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/target/linu
It is not necessary to have iucode-tool present on target system to have
functional intel-microcode package. The build time dependency is kept.
Signed-off-by: Tomasz Maciej Nowak
---
package/firmware/intel-microcode/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/pac
Create initrd enries for x86 images, that'll load intel microcode as
early as possible. To achieve that the test module for grub is enabled
which provides shell-like conditionals. Also restrict the late load of
microcode to AMD processors.
Signed-off-by: Tomasz Maciej Nowak
---
target/linux/x86/
Create initrd image with packed microcode. This'll allow to load it at
early boot stage.
Signed-off-by: Tomasz Maciej Nowak
---
package/firmware/intel-microcode/Makefile | 14 --
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/package/firmware/intel-microcode/Makefile
Currently every file in boot directory is copied over target /boot on
root file system and is usually inaccessible because appropriate boot
file system is mounted on top of it. Therefore remove /boot, which in
result will also save space on target root file system.
Signed-off-by: Tomasz Maciej Now
Add files to bootfs image from selected as built-in packages, which want
to install files to targets boot file system.
Signed-off-by: Tomasz Maciej Nowak
---
target/linux/x86/image/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/target/linux/x86/image/Makefile b/target/linux/x86/i
From: Rafał Miłecki
No single target/arch uses it and most likely there is no need to make
such a potential code target/arch specific.
Signed-off-by: Rafał Miłecki
---
.../400-mtd-add-rootfs-split-support.patch | 22 ++
...port-for-different-partition-parser-types.p
This patch adds support for Fritz!Box 7360 v2 (pollin.de currently
sells these as refurbished). It has 32 MiB of flash compared to the
16 MiB of v1 and SL.
Signed-off-by: Reinhard Max
Reviewed-by: Torsten Duwe
---
.../arch/mips/boot/dts/FRITZ7360.dtsi | 201 ++
.../arch
Nanostation M5 XW testing results on ath79
>
> > [0.444718] libphy: Fixed MDIO Bus: probed
> > [0.786402] libphy: ag71xx_mdio: probed
> > [0.793193] switch0: Atheros AR8236 rev. 1 switch registered on
> > mdio-bus.0
> > [1.137115] ag71xx 1900.eth: connected to PHY at mdio-bus.
Hello all,
I seem to have found the ways around this. So never mind. I'll send the dts
file when I'm happy with it.
Regards,
Seb
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
12 matches
Mail list logo
