Hello Sir ,
We are a trading company named Shaanxi Hao Zi Guan Materials Co.,Ltd . Now we
are very interested in your products , we will plan to sell your products in
the Chinese market . If you are interested in cooperation, please send us a
catalog and pricelist .w
Looking forward to re
Kind request to upload the custom firmware for router model TP-LINK
TD-W8951ND v5.0 if possible
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Dear all,
I acknowledge this patch on the RT-AC85P. For me in the setup without the
patch, port numbers above the LEDs are correctly linked to respective physical
port numbers, but the naming under Luci is incorrect, e.g. LAN1 corresponds to
physical port 4.
Birger
On 10 December 2019 14:25
Paul Fertser [2019-12-10 17:24:20]:
Hi,
> in cases when the interface is brought up faster it leads to two messages
in cases when the interface is brought up slower it leads to no message.
To me it just seems like a workaround to fix your use case, not a proper fix.
-- ynezz
The preinit network initialisation and failsafe informational message
are inherently racy as the interface takes some time to become
functional after "ip link set $pi_ifname up" command.
Consider this timing:
[ 12.002713] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.008819] IPv6: A
Hi Adrian.
W dniu 07.12.2019 o 23:28, Adrian Schmutzler pisze:
> The device part in the SUNXI_DTS variable always corresponds to
> device node name. This is another redundancy that can be removed
> by calculating the DTS name from a newly introduced SUNXI_SOC
> variable and the node name.
>
> Sig
Dear all,
I'll check this this evening. Maybe I got the numbers backwards. The router's
leds are labelled in the sequence 4 to 1 while the ports are numbered 1-4 at
the back...
Birger
On 10 December 2019 14:16:55 CET, "Gábor Varga" wrote:
>Dear Adrian,
>
>of course no, I have only Asus RT-A
JCG JHR-AC876M is an AC2600M router
Hardware specs:
SoC: MT7621AT
2.4GHz: MT7615N 4x4 @ PCIe0
5GHz: MT7615N 4x4 @ PCIe1
Flash: Winbond W25Q128JVSQ 16MiB
RAM: Nanya NT5CB128M16 256MiB
USB 2.0 and 3.0 ports
6 LEDs, 3 of which are connected to SoC GPIO
Reset and WPS buttons
Flash ins
Dear Adrian,
of course no, I have only Asus RT-AC65P router. As I see, the two devices
are identical, but hopefully Birger can confirm (or not) this. When the
port numbering are different on two devices, than I send a new patch.
Thanks,
Gabor Varga
Adrian Schmutzler ezt írta (időpont: 2019. de
Replace "usb_ochi" with "usb_ohci", and "usb_echi" with "usb_ehci"
Signed-off-by: DENG Qingfang
---
target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts | 6 +++---
target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts | 6 +++---
target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi | 6
Hi,
have you verified this for both devices (rt-ac65p and rt-ac85p)?
I've added Birger Koblitz to recipients (RT-AC85P author).
Best
Adrian
> -Original Message-
> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On
> Behalf Of varga...@gmail.com
> Sent: Montag, 9. D
Specifications:
- FCC ID: KA2IR615E3
- SoC: MIPS32 24K 400 MHz Atheros AR7240
- RAM: 32 MiB DDR SDRAM ESMT M13S2561616A-5T
- Flash: 4 MiB NOR SPI Macronix MX25L3208E
- Wireless: AR9287 2.4 GHz 802.11n 2T2R, 2x RP-SMA connectors
- Ethernet: 5x 100BASE-TX Fast Ethernet
- LEDs: 9x GPIO, 1x ath9k
- Bu
12 matches
Mail list logo