The kernel configuration allows us to select a default qdisc. Let's do this and
get rid of the hacky patch we've been carrying.
Signed-off-by: Rui Salvaterra
---
target/linux/generic/config-5.10 | 5 +-
.../661-use_fq_codel_by_default.patch | 100 --
2
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
Branch: refs/heads/master
Copy and refresh patches and config from 5.4 to 5.10. Most patches
require no more then automatic refresh. The only exception is the
Ethernet driver patch, which requires some more work:
* drop eth_change_mtu() usage since it was removed from the kernel,
it anyway useless for drivers that
ath25 requires a 88E6060 driver to support boards such as Fonera 2.0g
(FON2202). The swconfig based mvswitch driver has not yet been ported to
the 5.10 kernel as the only user is the ath25 target while all other
targets have been switched to the upstream DSA implementation.
Switching ath25 to the
Hello,
I finally managed to update ath25 to the 5.10 kernel. Sorry for that it
took so long time, I was a quite busy this fall. The update itself is
relatively simple: mostly copy'n'refresh plus a few Ethernet fixes.
Run-time tested with:
* Abicom FreedomCPE (AR5312 based)
* D-Link DWL-2100AP
The target config require some refresh due to the just introduced
filtering of the "run-time" options, MIPS eBPF JIT backporting, and so
on.
The configuration is easily updated using make kernel_oldconfig. So
let's update it now in preparation for v5.10 support to reduce the new
kernel
On Sat, Dec 18, 2021 at 01:21:21PM +0100, Janusz Dziedzic wrote:
> Hello,
>
> Have mt7915e in my mt7621 router (pandora box/ramips).
the same here with 'TP-LINK Archer C6U' (also ramips)
(but since a long time and maybe forever).
bye, Bastian
___
Hello,
I am currently performing some performance measurements, comparing the
(wired) routing throughput (WAN <-> LAN) of 19.07, 21.02 and master on
mt7621 (ZBT WG-3526). I have connected one client to my LAN and one to
the WAN, and use iperf3 to measure. I create parallel flows (in order
to take