Felix Fietkau kirjoitti 10.11.2023 klo 16.38:
On 10.11.23 15:21, e9hack wrote:
Too fast. I did reboot with the old version again. The patched version
does work.
Fix pushed, thanks for testing!
- Felix
Thanks,
I tested the current netifd with the fix, and it seems to work ok, again.
Pleas
This adds support for compiling the code against Mbed TLS 3.0.0.
It still compiles against Mbed TLS 2.28.
The following changes were needed:
* DES and 3DES was removed
* mbedtls_pk_context->pk_info is private, use mbedtls_pk_get_type()
to check if it was initialized
* mbedtls_pk_parse_keyfil
Make the linking of the shared library fail when undefined symbols are
used. Linking undefined symbols in a shared library normally works and
the linking of the binary using the shared library fails. We also
compile some example applications and they failed already.
Signed-off-by: Hauke Mehrtens
change-id: 2023-dns313-usb-serial-b9ac47e3a27e
Best regards,
--
Linus Walleij
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
This brings up a serial console on the USB device port of
the DNS-313.
Signed-off-by: Linus Walleij
---
target/linux/gemini/Makefile | 2 +-
target/linux/gemini/base-files/etc/inittab | 4
target/linux/gemini/image/Makefile | 2 +-
3 files changed, 6 insertions(+), 2 d
For devices using USB gadget serial we need to probe the modules
usb_f_acm and g_serial in order, then the available UDC (USB device
controller) interface will be hooked up to a serial port as
/dev/ttyGS0. (On the host side this appears as /dev/ttyACM0
when plugging in the USB cable.)
I don't quit
On Sat, Nov 11, 2023 at 1:35 PM Hauke Mehrtens wrote:
>
> Make the linking of the shared library fail when undefined symbols are
> used. Linking undefined symbols in a shared library normally works and
> the linking of the binary using the shared library fails. We also
> compile some example appli