The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
The information supporting the Su
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
The information supporting the Su
ramips: add support for Linksys EA7300 v2
This submission relied heavily on the work of
Santiago Rodriguez-Papa
Specifications:
* SoC: MediaTek MT7621A (880 MHz 2c/4t)
* RAM: Winbond W632GG6MB-12(256M DDR3-1600)
* Flash:
ramips: add support for Linksys EA7300 v2
This submission relied heavily on the work of
Santiago Rodriguez-Papa
Specifications:
* SoC: MediaTek MT7621A (880 MHz 2c/4t)
* RAM: Winbond W632GG6MB-12(256M DDR3-1600)
* Flash:
ramips: add support for Linksys EA7300 v2
This submission relied heavily on the work of
Santiago Rodriguez-Papa
Specifications:
* SoC:MediaTek MT7621A(880 MHz
2c/4t)
* RAM:Nanya NT5CC128M16IP-DIT (256M DDR3-1600)
My build, based on the EA7300v1 build has 2 glitches, the mt7603 radio
is not enable and the switch does not show in LuCi. The switch does
seem to function.
I essentially edited all the EA7300v1 commits and duplicated/edited the
EA7300v1 dts to a EA7300v2. In the image/mt7621.mk entry, I append
Based on the commit of Santiago Rodruquez-Papa, for a Linksys EA7300 V1,
I purchased a factory recertified EA7300 - version was not advertised.
On arrival, it was a version 2.
I researched and V2 is almost the same as V1 except it has 7603/7615
radios instead of a pair of 7615s. The memory/flash
Too much effort to say "No interest at this time?"
On Aug 19, 2020: 23:25, Piotr Dymacz wrote:
Hi Scott,
On 18.08.2020 23:27, Heppler, J. Scott wrote:
request.
Reply-To:
Organization:
I sent an email to cont...@openwrt.org, subject line Trademark Use
Request, inquiring about crowd
...
https://telecominfraproject.com/wifi/
If you have a particular price point you're trying to meet, I'm
curious to know...
Thanks,
Ben
On 8/18/20 2:27 PM, Heppler, J. Scott wrote:
request.
Reply-To: Organization:
I sent an email to cont...@openwrt.org, subject line Trademark Use
Requ
request.
Reply-To:
Organization:
I sent an email to cont...@openwrt.org, subject line Trademark Use
Request, inquiring about crowd funding an OpenWrt router. I never
received a reply. The email gave the background, links to forum
discussion and a poll and outlined the basic structure. The co
I came onto a Trendnet TEW-827DRU Version 2 that is MT7621an with
MT7615E x 2 wifi chips. I was able to get UART output and stock has
these partitions:
[2.512000] 0x-0x0100 : "ALL"
[2.52] 0x-0x0003 : "Bootloader"
[2.532000] 0x0003-0
Was unable to communicate TEW-810DR port order was inverted similar to
the D-Link DIR-810L. Tested - Patch corrects port order.
Signed-off-by: J. Scott Heppler
---
target/linux/ramips/mt7620/base-files/etc/board.d/02_network | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/t
* MediaTek MT7620A (580 Mhz)
* 8 MB of FLASH * 64 MB of RAM
* 2.4Ghz and 5.0Ghz radios both now functional
* 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
* UART header on PCB (57600 8n1)
* Green/Orange Power LEDs illuminating a Power-Button Lens
Green/Orange Internet LEDs GPIO controlled illuminati
* MediaTek MT7620A (580 Mhz)
* 8 MB of FLASH
* 64 MB of RAM
* 2.4Ghz and 5.0Ghz radios both now functional
* 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
* UART header on PCB (57600 8n1)
* Green/Orange Power LEDs illuminating a Power-Button Lens
Green/Orange Internet LEDs GPIO controlled illumina
* MediaTek MT7620A (580 Mhz)
* 8 MB of FLASH
* 64 MB of RAM
* 2.4Ghz and 5.0Ghz radios both now functional
* 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
* UART header on PCB (57600 8n1)
* Green/Orange Power LEDs illuminating a Power-Button Lens
Green/Orange Internet LEDs GPIO controlled illumina
Information for reviewers:
By report, FCCid and board photos, this device shares a Cameo manufactured
board with the D-Link DIR-810L. The DIR-810L dts does not enable GPIO40 for
the Green Internet/Globe lan led. The TEW-810DR dts should be applicable to the
DIR-810L and would provide improved Gre
With forum help from @123serge123 the trendnet:internet:green gpio was
enabled and added to a *dts and 01_leds. It is highly likely that this
change will work for the D-Link DIR-810L. Both the Trendnet and the
D-Link use a Cameo based board with the same cpu, spi flash and ram
chips. They hav
ramips: add support for TRENDnet TEW-810DR
new file: target/linux/ramips/dts/mt7620a_cameo_810.dtsi
modified: target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
new file: target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
modified: target/linux/ramips/image/mt76
0: 13:28, Adrian Schmutzler wrote:
Hi,
-Original Message-
From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On
Behalf Of Heppler, J. Scott
Sent: Samstag, 7. März 2020 22:24
To: openwrt-de...@openwrt.org
Subject: [OpenWrt-Devel] ramips: adding support for TRENDnet DIR-
I'm looking for some clarification on a prior patch:
I'm generating a new snapshot build and have the following questions:
1) My prior patch was criticized for a lack of
mt7620/base-files/etc/board.d/01_leds entry. I was basing my build on
the D-Link DIR-810L which seems to have the same Cameo
On Feb 27, 2020: 14:44, Adrian Schmutzler wrote:
-Original Message-
From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On
Behalf Of Heppler, J. Scott
Sent: Donnerstag, 27. Februar 2020 14:29
To: openwrt-de...@openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH v2] ramips
On Feb 27, 2020: 13:37, Adrian Schmutzler wrote:
Hi,
-Original Message-
From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On
Behalf Of Heppler, J. Scott
Sent: Donnerstag, 27. Februar 2020 03:39
To: openwrt-de...@openwrt.org
Subject: [OpenWrt-Devel] [PATCH v2] ramips
Signed-off-by: J. Scott Heppler
ramips: add support for TRENDnet TEW-810DR
Exact hardware clone for the D-Link DIR-810L. See OpenWRT device pages
and review the PCB photos, boot logs and MTP flash partitions.
https://openwrt.org/toh/trendnet/trendnet_tew-810dr_1.0_1.1
https://openwrt.org/toh/d
Signed-off-by: J. Scott Heppler
ramips: add support for TRENDnet TEW-810DR
Exact hardware clone for the D-Link DIR-810L.
Specification:
* MediaTek MT7620A (580 Mhz)
* 8 MB of FLASH
* 64 MB of RAM
* 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
* UART header on PCB (57600 8n1)
* 2x BiColor LED (GP
Signed-off-by: J. Scott Heppler
ramips: add support for TRENDnet TEW-810DR
Exact hardware clone for the D-Link DIR-810L.
Specification:
* MediaTek MT7620N (580 Mhz)
* 8 MB of FLASH
* 64 MB of RAM
* 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
* UART header on PCB (57600 8n1)
* 2x BiColor L
Some D-Link/Trendnet devices use a cameo signature and I found prior
posts regarding appending about 40 bytes of code to rootfs.
https://patchwork.ozlabs.org/patch/699611/
The post suggested the use of tools/firmware-utils/mkcameofw.
Presently, a build had the error that mkcameofw (also tried ca
I have successfully adapted OpenWRT's D-Link DIR-810L build for a
Trendnet TEW-810DR. It was low-hanging fruit, the devices essentially
use the same board.
One difference is that Trendnet firmware has what I've seen described as
a cameo signature appended at the end.
For my own use, I could use
27 matches
Mail list logo
