Add device ids for AR9462, QCA9862, QCA9880 v1 mPCIe cards and
Ubiquiti branded QCA9880 v2 PCI wifi found in LiteBeam 5ac.
Signed-off-by: Tomislav Požega
---
--- a/hardware.txt
+++ b/hardware.txt
@@ -1,6 +1,7 @@
# libiwinfo hardware database
# vendor id | device id | subsystem vendor id
When chip reset is done before the chip is checked if supported
there will be crash. Previous behaviour caused bootloops on
Archer C7 v1 units, this patch allows clean device boot without
excluding ath10k driver.
Signed-off-by: Tomislav Požega
---
...0-ath10k-reset-chip-after-supported
Switch Archer C7 v1 back to regular ath10k driver and firmware
since it contains fix for bootloop issue present with
QCA9880-AR1A.
Signed-off-by: Tomislav Požega
---
target/linux/ath79/image/generic-tp-link.mk |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/target
This series patch fixes bootloop issue and device starts
normally with QCA9880-AR1A in mPCIe slot.
Another card tested is QCA9862 and is detected and starts
properly.
Signed-off-by: Tomislav Požega
---
target/linux/ar71xx/image/generic-tp-link.mk |2 +-
1 files changed, 1 insertions(+), 1
When chip reset is done before the chip is checked if supported
there will be crash. Previous behaviour caused bootloops on
Archer C7 v1 units, this patch allows clean device boot without
excluding ath10k driver.
Signed-off-by: Tomislav Požega
---
drivers/net/wireless/ath/ath10k/pci.c | 12
Add 5/10 MHz channel width support for ath9k_htc driver. Connection tested
between several devices and working.
Signed-off-by: Tomislav Požega
---
.../patches/512-ath9k_channelbw_debugfs.patch | 62
1 files changed, 62 insertions(+), 0 deletions(-)
diff --git
This will ensure the htc suffixed driver also gets created
chanbw debugfs entry.
Signed-off-by: Tomislav Požega
---
.../mac80211/files/lib/netifd/wireless/mac80211.sh |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/package/kernel/mac80211/files/lib/netifd/wireless
Create a patch that removes the output of unnecessary interface
informations which occur if the radio broadcasts more than one ssid to
speed up the operation and provide clean output. Also removes
scanProcesses function to get rid of the busybox output garbage.
Signed-off-by: Tomislav Požega
Create a patch that removes the output of unnecessary interface
informations which occur if the radio broadcasts more than one ssid to
speed up the operation and provide clean output. Also removes
scanProcesses function to get rid of the busybox output garbage.
Signed-off-by: Tomislav Požega
Create a patch that fixes an issue with mdk3 package that would break
build process when enabled with -Werror=format-security message. Closes
ticket https://dev.openwrt.org/ticket/20698
Signed-off-by: Tomislav Požega <pozega.tomis...@gmail.com>
---
diff -purN
a/feeds/packages/net/aircr
Create a patch that fixes an issue with mdk3 package that would break
build process when enabled with -Werror=format-security message. Closes
ticket https://dev.openwrt.org/ticket/20698
Signed-off-by: Tomislav Požega <pozega.tomis...@gmail.com>
---
diff -purN
a/feeds/packages/net/aircr
Update Xiaomi MiWiFi Mini .dts file with setting read-only flag to
u-boot partition and enabling PA to improve 2.4 GHz signal strength.
Signed-off-by: Tomislav Požega <pozega.tomis...@gmail.com>
---
diff -purN a/target/linux/ramips/dts/XIAOMI-MIWIFI-MINI.dts
b/target/linux/ramips/dts/
Fix profile names for GL-AR150 and GL-AR300 devices.
Signed-off-by: Tomislav Požega <pozega.tomis...@gmail.com>
---
diff -pur a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh 2016-02-05
Add support for GL-AR150, GL-AR300 and GL-Domino Pi devices. Backported
from trunk, tested and working with GL-AR150.
Signed-off-by: Tomislav Požega <pozega.tomis...@gmail.com>
---
diff -purN a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
b/target/linux/ar71xx/base-files/e
thomson usually sticks with crappy broadcom so don't give much hope for
AR9271..
On 17 October 2013 09:33, Jacek Kikiewicz ja...@aol.pl wrote:
Hi,
First start with gainig console access...
Then you need to check what boot loader is there.
Depending on what it is your next steps will vary,
as already described in ticket
https://dev.openwrt.org/ticket/13523rt2800usb driver does not function
properly in trunk revisions.
with default settings it is impossible to obtain stable throughput. the bug
is reported as still present in latest kernel
as already described in tickethttps://dev.openwrt.org/ticket/13523
https://dev.openwrt.org/ticket/13523rt2800usb
rt2800usb driver does not function properly in trunk revisions.
with default settings it is impossible to obtain stable throughput. the bug
is reported as still present in latest
to delete NVRAM also, and if i do it will the CFE rebuild it on the next
boot?
On 2 June 2013 06:01, Hauke Mehrtens ha...@hauke-m.de wrote:
On 06/01/2013 11:56 PM, Tomislav Požega wrote:
applied the patch and compiled everything from the start but no change
in boot process
This patch should
cannot access router even in failsafe mode, most likely due to roboswitch
errors
someone else reported exact same problem here -
http://eko.one.pl/forum/viewtopic.php?id=6363
log file shows errors only when entering failsafe mode:
Press the [f] key and hit [enter] to enter failsafe mode
f
[
: https://dev.openwrt.org/ticket/7502
On Sun, Jun 23, 2013 at 1:08 PM, Tomislav Požega
pozega.tomis...@gmail.com wrote:
cannot access router even in failsafe mode, most likely due to roboswitch
errors
someone else reported exact same problem here -
http://eko.one.pl/forum/viewtopic.php?id
brcm47xx platform with BCM5354, BARRIER BREAKER (Bleeding Edge, r36813)
i'm getting these jffs2 errors at each boot as well as system read-only
(doesn't allow to change passwd etc.)
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[ 10.328000] jffs2:
, Tomislav Požega wrote:
compiled an image with patches included in my previous message, flashed
the device and got kernel panic and errors in log file
i'm not sure how to proceed further with this
Decompressing.done
CFE version 1.0.37 for BCM947XX (32bit,SP,LE
these patches are slight modification of Fiach Antaw's original
gs2_support.diff he used to successfully port GlobeSurfer 2
i have changed boardtype and boardrev variables to the ones of globesurfer3.
Index: target/linux/brcm47xx/image/lzma-loader/src/decompress.c
compiled an image with patches included in my previous message, flashed the
device and got kernel panic and errors in log file
i'm not sure how to proceed further with this
Decompressing.done
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Tue Apr 28 09:59:43 CEST 2009
vlan0ports=5
vlan1ports=0 1 2 3 4 5*
i have zipped nvram, original firmware boot process and complete flash
image in case you might find it useful
http://www25.zippyshare.com/v/34134998/file.html
On 1 June 2013 10:32, Hauke Mehrtens ha...@hauke-m.de wrote:
On 06/01/2013 04:11 PM, Tomislav
25 matches
Mail list logo