Dear Sir,
I configure my WR703N to repeater mode, wlan0-1 connect to main router, and PC
connect to WR703N by wlan0.
WR703N work normally if it can connect main router, but if it connect main
router failed, openwrt won't enable WR703N wlan0, so I can't login WR703N to
reconfigure it.
How to
Dear Sir,
I have a HUAWEI 3G usb modem, The download speed is over 160KB/s if connected
directly to PC, but if used with WR703N, the download speed is only 60KB/s.
I think wifi and usb speed isn't bottleneck, but what is root cause of slower
speed through router? pppd?
Thanks!
Dear Sirs.
As we know, we can configure network.lan.interface or network.wan.interface
as eth0 to use ethernet port as lan or wan port on WR703N.
I think it should need to do anything in driver for switch ethernet port, and I
want to know what happened between user space and kernel space after
promiscuous mode
Jan 1 00:00:53 OpenWrt kern.info kernel: [ 53.61] br-lan: port 2(wlan0)
entered disabled state
If any suggestion? Thanks!
At 2013-07-05 23:21:53,jinzhcheng bjzhoug...@126.com wrote:
Dear Sir
I try to modify mach-tl-wr703n.c:
static void __init tl_wr703n_setup(void)
{
u8
Dear Sir
I try to modify mach-tl-wr703n.c:
static void __init tl_wr703n_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
printk(%s\n, __func__);
// set mac test, will be set same in /etc/config/wireless
*mac = 0x84;
Dear Sir
(1)
This my config file in attitude_adjustment about openssh-server:
CONFIG_DEFAULT_dropbear=y
# CONFIG_PACKAGE_dropbear is not set
#
# SSH
#
# CONFIG_PACKAGE_openssh-client is not set
# CONFIG_PACKAGE_openssh-client-utils is not set
CONFIG_PACKAGE_openssh-keygen=y
On 6/8/2013 8:10 PM, Mitch Kelly wrote:
Hi,
The 703N can only supply 200mA out the USB port, Its likely this issue
is caused by the device using more power that can be supplied and the
device resetting.
TP-Link have a compatibility Martix for devices, It is based on Power
consumption,
On 6/8/2013 8:10 PM, Mitch Kelly wrote:
Hi,
The 703N can only supply 200mA out the USB port, Its likely this issue
is caused by the device using more power that can be supplied and the
device resetting.
TP-Link have a compatibility Martix for devices, It is based on Power
consumption,
My understanding is that OpenWRT Attitude Adjustment, along with current
versions of trunk, are not expected to run in any reliable way under less
than 32MB of RAM. In particular, the v3.x kernel is not supported for so
little memory, and the OpenWRT dev community likewise doesn't support it.
Dear All
I checkout r36652 version of attitude_adjustment branch, and build to generate
openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin,
but after download to board, I cant find wlan0 device for AP:
root@OpenWrt:/# ifconfig
br-lanLink encap:Ethernet HWaddr 84:5D:D7:00:31:88
10 matches
Mail list logo