On 02/12/2012 09:10 PM, Aaron Z wrote:
> On 02/02/2012 4:52:09 PM, Hauke Mehrtens wrote:
>> On 01/28/2012 06:55 AM, Aaron Z wrote:
>>> When I run "killall -9 hostapd" then "wifi" I get told:
>>> "Configuration file: /var/run/hostapd-phy0.conf" and "Using
>>> interface wlan0 with hwaddr MACADDRESS a
On 02/02/2012 4:52:09 PM, Hauke Mehrtens wrote:
> On 01/28/2012 06:55 AM, Aaron Z wrote:
> > When I run "killall -9 hostapd" then "wifi" I get told:
> > "Configuration file: /var/run/hostapd-phy0.conf" and "Using
> > interface wlan0 with hwaddr MACADDRESS and ssid 'OpenWrt'"wifi is
> > still reject
Hi Aaron,
On 01/28/2012 06:55 AM, Aaron Z wrote:
> Thanks for looking at my logs.
> I just installed the trunk that was compiled today (r29915, thanks to whoever
> ran that build) and SSH seems to be behaving, so my SSH issues may have just
> been a fluke.
I got an other report of SSH not workin
Thanks for looking at my logs.
I just installed the trunk that was compiled today (r29915, thanks to whoever
ran that build) and SSH seems to be behaving, so my SSH issues may have just
been a fluke.
Wireless still fails at boot until I run the wifi debugging command as shown
below.
I tried runn
Hi Aaron,
thanks for the detailed report.
With a quick look I was unable to see anything suspicious in the logs. I
will try to reproduce your problems on one of my devices.
Hauke
On 01/22/2012 07:49 PM, Aaron Z wrote:
> Got the wireless to work today. I followed the directions at
> http://wiki.
2012/1/22 Hauke Mehrtens :
>> 6. The Wireless LED on the WAP does not turn on
> Probably something is wrong in the wireless driver.
>
> There is a know issue with the wireless chip used in your device, but I
> do not know, if you are seeing this issue or if it is already fixed:
> BCM4321: some card
Got the wireless to work today. I followed the directions at
http://wiki.openwrt.org/doc/devel/debugging and ran "killall -9 hostapd;
/usr/sbin/hostapd -dd /var/run/hostapd-phy0.conf > /tmp/hostapd.log" from a SSH
session, then tried to connect.
Before I ran it, I would get a connection failed
Hi Aaron,
On 01/22/2012 04:54 AM, Aaron Z wrote:
> Resending as I used the wrong from address last time and it bounced.
hmm at least I got your mails.
>
> It loaded and booted, but I am seeing some oddities. Not sure if these are
> related to being bleeding edge or what, but they are noticeable