This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.
There ar
On 21 January 2012 00:53, Marco Antonio Mauro wrote:
> This patch adds support for the Sitecom WL-341 v3 and other Sercomm
> IP1006RRv2 based boards for sysupgrade support and for the initial
> flash through pushbutton initiated recovery mode with the special
> partition table and fixes for the qu
On Sat, Jan 21, 2012 at 6:36 PM, Roman Yeryomin wrote:
> On 21 January 2012 00:53, Marco Antonio Mauro wrote:
>> This patch adds support for the Sitecom WL-341 v3 and other Sercomm
>> IP1006RRv2 based boards for sysupgrade support and for the initial
>> flash through pushbutton initiated recovery
On 22 January 2012 14:13, Marco Antonio Mauro wrote:
> On Sat, Jan 21, 2012 at 6:36 PM, Roman Yeryomin wrote:
>> On 21 January 2012 00:53, Marco Antonio Mauro wrote:
>>> This patch adds support for the Sitecom WL-341 v3 and other Sercomm
>>> IP1006RRv2 based boards for sysupgrade support and for
On Sun, Jan 22, 2012 at 8:40 PM, Roman Yeryomin wrote:
> On 22 January 2012 14:13, Marco Antonio Mauro wrote:
>> On Sat, Jan 21, 2012 at 6:36 PM, Roman Yeryomin
>> wrote:
>>> On 21 January 2012 00:53, Marco Antonio Mauro wrote:
This patch adds support for the Sitecom WL-341 v3 and other S
On 24 January 2012 03:39, Marco Antonio Mauro wrote:
>> Leds are tested in output mode which you are skipping.
>> If you are testing leds only you should be skipping input mode, not
>> output, and see which led blinks (it should blink 3 times if you don't
>> interrupt it).
>
> The thing is that it
