John Crispin openwrt.org> writes:
>
> sorry, been too busy and i doubt i will have time in the near future to
> look at it :(
>
Oooh! Too bad :))
John, could you teld me some tips on how to progress with it and RT5350 cpu
instead MT7620? I've defined a new section in
...target/linux/ramips
On 09/07/2015 09:59, Sergio wrote:
> Hi guys,
>
>>
>> Hi,
>>
>> once i fixed the codec problem on my unit i will look at the bug. can
>> you help me get one of the rt5350 boards that you have ? can you tell
>> me a link the the board ?
>>
>> John
>
> I'm using toplinkst top-ap01-38
Hi guys,
>
> Hi,
>
> once i fixed the codec problem on my unit i will look at the bug. can
> you help me get one of the rt5350 boards that you have ? can you tell
> me a link the the board ?
>
> John
I'm using toplinkst top-ap01-38 with RT5350 and trying to setup a dac codec
using i
to get a rt5350 board to look at this bug. The
bug is in ralink-gdma.c, so youcan test it on your own board.
Best Regards,
zhenjun_...@icloudaegis.com
From: John CrispinDate: 2014-04-04 22:13To: openwrt-develSubject: Re:
[OpenWrt-Devel] Does anyone have used Ralink i2s under openwrt?
On 04/04/2
On 04/04/2014 08:14, zhenjun_...@icloudaegis.com wrote:
> Hi, I have checked that "drivers/dma/ralink-gdma.c" works with an
> bug. In function "gdma_dma_start_transfer", dma buffer contains
> the correct data. But buffer data changes when transimision is done
> in function "gdma_dma_chan_irq".
Hi, I have checked that "drivers/dma/ralink-gdma.c" works with an bug.
In function "gdma_dma_start_transfer", dma buffer contains the correct data.
But buffer data changes when transimision is done in function
"gdma_dma_chan_irq". It seem like that after start action the callerupda
On 01/04/2014 05:52, zhenjun_...@icloudaegis.com wrote:
> Hi, I have a RT5350 module with wm8978 codec and try to driver
> sound under openwrt. The relevant driver in openwrt trunk as
> follows: sound/soc/ralink/mt7620-i2s.c
> sound/soc/ralink/mt7620-wm8960.c drivers/dma/ralink-gdma.c
>
> The i2
Hi, I have a RT5350 module with wm8978 codec and try to driver sound
under openwrt. The relevant driver in openwrt trunk as follows:
sound/soc/ralink/mt7620-i2s.c
sound/soc/ralink/mt7620-wm8960.c
drivers/dma/ralink-gdma.c
The
