Hi! I'm trying to run OpenWRT on a Buffalo WZR-D1800H ( see Wiki http://wiki.openwrt.org/toh/buffalo/wzr-d1800h) Currently I'm able to run the initramfs image via tftp boot. The following drivers work: -wl (1bgn, 11an, no 11ac which I do not care) -bgmac -usb So most important parts work :-)
But I have problems with flash and booting from flash. If I flash the brcm image via bootloader, it ends up with this: ------------------------------------------------------------ CFE> flash -noheader 192.168.11.2:firmware.ram nflash1.trx Reading 192.168.11.2:firmware.ram: Done. 3411968 bytes read Programming...done. 3411968 bytes written *** command status = 0 CFE> go check_trx: start nflash1.trx check_trx: exit nflash1.trx Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null) Loading: .. 3780 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 ------------------------------------------------------------ -> and no more happens [firmware.ram is a symlink to the squashfs image!] If I use another firmware, it looks like this: ------------------------------------------------------------ check_trx: start nflash1.trx check_trx: exit nflash1.trx Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null) Loading: .. 1312820 bytes read Entry at 0x80001000 Closing network. ------------------------------------------------------------ Another problems seems to be that OpenWRT does not support the flash itself or has problems with ECC. The OpenWRT kernel reports : [ 1.370000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64 [ 1.380000] NAND_ECC_NONE selected by board driver. This is not recommended! And so all images writen from the booted initramfs cannot even be loaded from flash. The bootloader displays endless ECC errors. Perhaps you have a hint what I can do? André
BUFFALO CFE Version 1.04 Memory Test start(0xA0100000) end(0xA8000000) size(33292288) Data line test start:0xa0100000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA Address line test start:0xa0100000 len:0x7f00000 pattern 0xAAAAAAAA 0x55555555 Fill test patnum:2 fill Pattern 5555AAAA Writing... Reading... fill Pattern AAAA5555 Writing... Reading... Decompressing...done CFE version 6.30.15.3 (r315282) based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Tue Apr 24 09:04:01 JST 2012 (root@fc15.localdomain) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Initializing PCI. [normal] PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x01) PCI bus 0 slot 1/0: vendor 0x14e4 product 0x4715 (ethernet network, rev 0x01) PCI bus 0 slot 4/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10, rev 0x01) PCI bus 0 slot 4/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20, rev 0x01) PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0820 (PCI bridge, rev 0x01) PCI bus 0 slot 6/0: vendor 0x14e4 product 0x0820 (PCI bridge, rev 0x01) PCI bus 0 slot 7/0: vendor 0x14e4 product 0x052e (undefined subclass 0xff, interface 0xff, rev 0x01) PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080e (RAM memory, rev 0x01) PCI bus 0 slot 9/0: vendor 0x14e4 product 0x0534 (undefined subclass 0xff, interface 0xff, rev 0x01) Init Devs. Boot partition size = 262144(0x40000) Found an ST compatible serial flash with 8 64KB blocks; total size 0MB Found a Samsung (1 bit-cell) NAND flash with 2048B pages or 128KB blocks; total size 128MB bcm_robo_enable_switch: EEE is disabled et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.15.3 (r315282) CPU type 0x19749: 600MHz Tot mem: 131072 KBytes CFE mem: 0x87000000 - 0x87164A60 (1460832) Data: 0x8704C9A0 - 0x87050BA0 (16896) BSS: 0x87050BA0 - 0x87062A60 (73408) Heap: 0x87062A60 - 0x87162A60 (1048576) Stack: 0x87162A60 - 0x87164A60 (8192) Text: 0x87000000 - 0x8704C994 (313748) DRAM magic offset:00060000 size:00010000 DRAM magic found Device eth0: hwaddr 12-6F-3F-81-0F-79, ipaddr 192.168.11.1, mask 255.255.255.0 gateway not set, nameserver not set check_trx: start nflash1.trx check_trx: exit nflash1.trx Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null) Loading: .. 1312820 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00019749 (MIPS 74Kc) Found an ST compatible serial flash with 8 64KB blocks; total size 0MB found nvram at 70000 something wrong here. do not remap Determined physical RAM map: memory: 07fff000 @ 00000000 (usable) Zone ranges: Normal [mem 0x00000000-0x07ffefff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00000000-0x07ffefff] Primary instruction cache 32kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Linux version 3.8.7 (root@dd-wrt) (gcc version 4.7.3 20121106 (prerelease) (Linaro GCC 4.7-2012.11) ) #162 Mon Apr 15 11:51:57 CEST 2013 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32511 Kernel command line: console=ttyS0,115200 root=1f06 rootfstype=squashfs noinitrd init=/bin/sh PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) __ex_table already sorted, skipping sort Writing ErrCtl register=80000200 Readback ErrCtl register=80000200 Cache parity protection enabled Memory: 125652k/131068k available (2953k kernel code, 5416k reserved, 639k data, 304k init, 0k highmem) NR_IRQS:128 CPU: BCM5300 rev 1 at 600 MHz bcm947xx_clockevent_set_mode: 1 bcm947xx_clockevent_set_mode: 3 console [ttyS0] enabled Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 NET: Registered protocol family 16 bio: create slab <bio-0> at 0 PCI: Initializing host PCI: Reset RC PCI: Initializing host PCI: Reset RC PCI: scanning bus 0 PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] pci_bus 0000:00: root bus resource [bus 00-ff] PCI: Fixing up bus 0 pci 0000:00:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI/PCIe coreunit 0 is set to bus 1. PCI: Fixing up bridge PCI: Fixing up bridge PCI: Enabling device 0000:01:00.1 (0004 -> 0006) PCI: Fixing up bus 1 PCI/PCIe coreunit 1 is set to bus 2. PCI: Fixing up bridge PCI: Fixing up bridge PCI: Enabling device 0000:02:00.1 (0004 -> 0006) PCI: Fixing up bus 2 Switching to clocksource MIPS NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Buffalo D1800H init squashfs: version 3.0 (2006/03/15) Phillip Lougher msgmni has been set to 245 alg: No test for stdrng (krng) io scheduler noop registered (default) HDLC line discipline maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a U6_16550A serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a U6_16550A brd: module loaded pflash: found no supported devices try to find cfe size up to 524288 no filesys. assume nflash devices bootloader size: 524288 nvram size: 65536 Creating 3 MTD partitions on "bcmsflash": 0x000000000000-0x000000080000 : "cfe" 0x000000070000-0x000000080000 : "nvram" 0x000000070000-0x000000080000 : "nvram_cfe" Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 nand_read_bbt: bad block at 0x0000011e0000 nand_read_bbt: bad block at 0x0000054c0000 Creating 2 MTD partitions on "brcmnand": 0x000000000000-0x000002000000 : "linux" 0x000002000000-0x000007f00000 : "ddwrt" lookup_nflash_rootfs_offset: offset = 0x0 found trx at 0, len =18444288 scan filesys at 140400 nflash: squash filesystem with lzma found at offset 0 Creating 2 MTD partitions on "nflash": 0x000000000000-0x000002000000 : "nandimage" 0x000000140400-0x000002000000 : "rootfs" mtd: partition "rootfs" set to be root filesystem tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 Broadcom Watchdog Timer: 0.07 initialized. GACT probability NOT on Mirror/redirect action on Simple TC action Loaded netem: version 1.3 u32 classifier Performance counters on input device check on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1963 buckets, 7852 max) nf_conntrack_rtsp v0.6.21 loading xt_time: kernel timezone is -0000 ip_set: protocol 6 gre: GRE over IPv4 demultiplexor driver nf_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2006 Netfilter Core Team TCP: bic registered TCP: cubic registered TCP: westwood registered TCP: highspeed registered TCP: hybla registered TCP: htcp registered TCP: vegas registered TCP: veno registered TCP: scalable registered TCP: lp registered TCP: yeah registered TCP: illinois registered NET: Registered protocol family 17 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 startup nvram driver found nvram found cfe nvram VFS: Mounted root (squashfs filesystem) readonly on device 31:6. Freeing unused kernel memory: 304k freed
BUFFALO CFE Version 1.04 Memory Test start(0xA0100000) end(0xA8000000) size(33292288) Data line test start:0xa0100000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA Address line test start:0xa0100000 len:0x7f00000 pattern 0xAAAAAAAA 0x55555555 Fill test patnum:2 fill Pattern 5555AAAA Writing... Reading... fill Pattern AAAA5555 Writing... Reading... Decompressing...done CFE version 6.30.15.3 (r315282) based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Tue Apr 24 09:04:01 JST 2012 (root@fc15.localdomain) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Initializing PCI. [normal] PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x01) PCI bus 0 slot 1/0: vendor 0x14e4 product 0x4715 (ethernet network, rev 0x01) PCI bus 0 slot 4/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10, rev 0x01) PCI bus 0 slot 4/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20, rev 0x01) PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0820 (PCI bridge, rev 0x01) PCI bus 0 slot 6/0: vendor 0x14e4 product 0x0820 (PCI bridge, rev 0x01) PCI bus 0 slot 7/0: vendor 0x14e4 product 0x052e (undefined subclass 0xff, interface 0xff, rev 0x01) PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080e (RAM memory, rev 0x01) PCI bus 0 slot 9/0: vendor 0x14e4 product 0x0534 (undefined subclass 0xff, interface 0xff, rev 0x01) Init Devs. Boot partition size = 262144(0x40000) Found an ST compatible serial flash with 8 64KB blocks; total size 0MB Found a Samsung (1 bit-cell) NAND flash with 2048B pages or 128KB blocks; total size 128MB bcm_robo_enable_switch: EEE is disabled et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.15.3 (r315282) CPU type 0x19749: 600MHz Tot mem: 131072 KBytes CFE mem: 0x87000000 - 0x87164A60 (1460832) Data: 0x8704C9A0 - 0x87050BA0 (16896) BSS: 0x87050BA0 - 0x87062A60 (73408) Heap: 0x87062A60 - 0x87162A60 (1048576) Stack: 0x87162A60 - 0x87164A60 (8192) Text: 0x87000000 - 0x8704C994 (313748) DRAM magic offset:00060000 size:00010000 DRAM magic found Device eth0: hwaddr 12-6F-3F-81-0F-79, ipaddr 192.168.11.1, mask 255.255.255.0 gateway not set, nameserver not set wating 3 seconds... loading fw...Device eth0: hwaddr 12-6F-3F-81-0F-79, ipaddr 192.168.11.1, mask 255.255.255.0 gateway not set, nameserver not set Loader:elf Filesys:tftp Dev:eth0 File:192.168.11.2:firmware.ram Options:(null) Loading: 0x80001000/9668876 0x8093990c/251808 Entry at 0x800056f0 Closing network. Starting program at 0x800056f0 [ 0.000000] Linux version 3.10.26 (avalentin@varus) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39214) ) #2 Mon Jan 13 00:08:37 CET 2014 [ 0.000000] CPU revision is: 00019749 (MIPS 74Kc) [ 0.000000] bcm47xx: using bcma bus [ 0.000000] bcma: bus0: Found chip with id 0x5300, rev 0x01 and package 0x00 [ 0.000000] bcma: bus0: Core 0 found: BCM4706 ChipCommon (manuf 0x4BF, id 0x500, rev 0x1F, class 0x0) [ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x00, class 0x0) [ 0.000000] bcma: bus0: Found M25P40 serial flash (size: 512KiB, blocksize: 0x10000, blocks: 8) [ 0.000000] bcma: bus0: Early bus registered [ 0.000000] MIPS: machine is Unknown Board [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 07fff000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x07ffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x07ffefff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32511 [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=80000000 [ 0.000000] Readback ErrCtl register=80000000 [ 0.000000] Cache parity protection enabled [ 0.000000] Memory: 120168k/131068k available (2285k kernel code, 10900k reserved, 575k data, 6604k init, 0k highmem) [ 0.000000] NR_IRQS:128 [ 0.000000] Setting up vectored interrupts [ 0.070000] Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136) [ 0.070000] pid_max: default: 32768 minimum: 301 [ 0.070000] Mount-cache hash table entries: 512 [ 0.070000] NET: Registered protocol family 16 [ 0.080000] bio: create slab <bio-0> at 0 [ 0.080000] Switching to clocksource MIPS [ 0.090000] NET: Registered protocol family 2 [ 0.090000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.090000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.090000] TCP: reno registered [ 0.090000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.090000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.090000] NET: Registered protocol family 1 [ 0.240000] bcma: bus0: Core 1 found: BCM4706 GBit MAC (manuf 0x4BF, id 0x52D, rev 0x00, class 0x0) [ 0.240000] bcma: bus0: Core 2 found: BCM4706 GBit MAC (manuf 0x4BF, id 0x52D, rev 0x00, class 0x0) [ 0.240000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0) [ 0.240000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0) [ 0.240000] bcma: bus0: Core 6 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0) [ 0.240000] bcma: bus0: Core 7 found: AMEMC (DDR) (manuf 0x4BF, id 0x52E, rev 0x00, class 0x0) [ 0.240000] bcma: bus0: Core 8 found: BCM4706 SOC RAM (manuf 0x4BF, id 0x50E, rev 0x05, class 0x0) [ 0.240000] bcma: bus0: Core 9 found: ALTA (I2S) (manuf 0x4BF, id 0x534, rev 0x00, class 0x0) [ 0.240000] bcma: bus0: Core 10 found: BCM4706 GBit MAC Common (manuf 0x43B, id 0x5DC, rev 0x00, class 0x0) [ 0.250000] bcma: bus0: PCIEcore in host mode found [ 0.440000] PCI host bridge to bus 0000:00 [ 0.440000] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0bffffff] [ 0.440000] pci_bus 0000:00: root bus resource [io 0x0100-0x047f] [ 0.440000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.440000] bcma: PCI: Fixing up bridge 0000:00:00.0 [ 0.440000] bcma: PCI: Fixing up device 0000:00:00.0 [ 0.440000] bcma: PCI: Fixing up bridge 0000:00:00.1 [ 0.440000] bcma: PCI: Fixing up device 0000:00:00.1 [ 0.440000] bcma: PCI: Fixing up addresses 0000:00:01.0 [ 0.440000] pci 0000:00:01.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit] [ 0.440000] pci 0000:00:01.0: BAR 2: assigned [mem 0x08200000-0x083fffff 64bit] [ 0.440000] bcma: bus0: PCIEcore in host mode found [ 0.630000] PCI host bridge to bus 0000:01 [ 0.630000] pci_bus 0000:01: root bus resource [mem 0x40000000-0x43ffffff] [ 0.630000] pci_bus 0000:01: root bus resource [io 0x0480-0x07ff] [ 0.630000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] [ 0.630000] bcma: PCI: Fixing up bridge 0000:01:00.0 [ 0.630000] bcma: PCI: Fixing up device 0000:01:00.0 [ 0.630000] bcma: PCI: Fixing up bridge 0000:01:00.1 [ 0.630000] bcma: PCI: Fixing up device 0000:01:00.1 [ 0.630000] bcma: PCI: Fixing up addresses 0000:01:01.0 [ 0.630000] pci 0000:01:01.0: BAR 0: assigned [mem 0x40000000-0x40003fff 64bit] [ 0.640000] PCI: Enabling device 0000:01:01.0 (0000 -> 0002) [ 0.640000] bcma: PCI: Fixing up device 0000:01:01.0 [ 0.640000] bcma: change PCIe max read request size from 512 to 128 [ 0.640000] bcma: bus1: Found chip with id 0x4331, rev 0x02 and package 0x08 [ 0.640000] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 0.640000] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 0.640000] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0) [ 0.690000] bcma: bus1: Bus registered [ 0.690000] bcma: bus0: Bus registered [ 0.690000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.690000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.690000] msgmni has been set to 234 [ 0.690000] io scheduler noop registered [ 0.690000] io scheduler deadline registered (default) [ 0.690000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled [ 0.720000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a U6_16550A [ 1.290000] console [ttyS0] enabled [ 1.320000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 2) is a U6_16550A [ 1.330000] 2 bcm47xxpart partitions found on MTD device bcm47xxsflash [ 1.340000] Creating 2 MTD partitions on "bcm47xxsflash": [ 1.340000] 0x000000000000-0x000000070000 : "boot" [ 1.350000] 0x000000070000-0x000000080000 : "nvram" [ 1.360000] bcm47xxnflash: Chip reset not implemented yet [ 1.360000] bcm47xxnflash: Requested invalid id_data: 32 [ 1.370000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64 [ 1.380000] NAND_ECC_NONE selected by board driver. This is not recommended! [ 1.390000] Bad block table found at page 65472, version 0x01 [ 1.400000] Bad block table found at page 65408, version 0x01 [ 1.400000] nand_read_bbt: bad block at 0x0000011e0000 [ 1.410000] nand_read_bbt: bad block at 0x0000054c0000 [ 1.580000] can not find a nvram partition reserve last block [ 1.580000] 4 bcm47xxpart partitions found on MTD device NAND 128MiB 3,3V 8-bit [ 1.590000] Creating 4 MTD partitions on "NAND 128MiB 3,3V 8-bit": [ 1.600000] 0x000000000000-0x000007fc0000 : "firmware" [ 1.610000] 0x00000000001c-0x000000140400 : "linux" [ 1.610000] mtd: partition "linux" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 1.630000] 0x000000140400-0x000007fc0000 : "rootfs" [ 1.630000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 1.650000] mtd: device 4 (rootfs) set to be root filesystem [ 1.650000] mtdsplit: no squashfs found in "NAND 128MiB 3,3V 8-bit" [ 1.660000] 0x000007fc0000-0x000008000000 : "nvram_guess" [ 1.670000] libphy: Fixed MDIO Bus: probed [ 1.680000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds) [ 1.680000] GPIO_WDT: failed to register misc device [ 1.690000] TCP: cubic registered [ 1.690000] NET: Registered protocol family 17 [ 1.700000] 8021q: 802.1Q VLAN Support v1.8 [ 1.720000] Freeing unused kernel memory: 6604K (802cd000 - 80940000) procd: Console is alive procd: - watchdog - procd: - preinit - [ 1.800000] pps_core: LinuxPPS API ver. 1 registered [ 1.800000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> [ 1.830000] PTP clock support registered [ 1.840000] bgmac bcma0:0: Found PHY addr: 30 (NOREGS) [ 1.850000] bgmac bcma0:0: Support for Roboswitch not implemented [ 1.850000] libphy: bgmac mii bus: probed [ 1.930000] b53_common: found switch: BCM53125, rev 4 [ 1.940000] bgmac: Broadcom 47xx GBit MAC driver loaded [ 3.940000] libphy: bgmac-0-0:1e - Link is Up - 1000/Full Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level procd: - early - procd: - watchdog - procd: - ubus - procd: - init - Please press Enter to activate this console. [ 8.500000] NET: Registered protocol family 10 [ 8.510000] nf_conntrack version 0.5.0 (1980 buckets, 7920 max) [ 8.520000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.550000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093 [ 8.550000] Backport generated by backports.git backports-20130802-0-gdb67a3f [ 8.570000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.610000] xt_time: kernel timezone is -0000 [ 8.640000] cfg80211: Calling CRDA to update world regulatory domain [ 8.640000] cfg80211: World regulatory domain updated: [ 8.650000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.660000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.660000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.670000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.680000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm) [ 8.690000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm) [ 8.700000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 8.740000] PPP generic driver version 2.4.2 [ 8.760000] NET: Registered protocol family 24 [ 8.790000] b43-phy0: Broadcom 4331 WLAN found (core revision 29) [ 8.790000] b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1 [ 8.810000] Broadcom 43xx driver loaded [ Features: PNL ] [ 8.830000] Broadcom 43xx-legacy driver loaded [ Features: PLD ] Jan 1 00:00:10 crond[524]: crond: crond (busybox 1.19.4) started, log level 5 procd: - init complete - [ 13.730000] device eth0.1 entered promiscuous mode [ 13.740000] device eth0 entered promiscuous mode [ 13.750000] br-lan: port 1(eth0.1) entered forwarding state [ 13.750000] br-lan: port 1(eth0.1) entered forwarding state [ 14.730000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 15.030000] libphy: bgmac-0-0:1e - Link is Up - 1000/Full [ 15.750000] br-lan: port 1(eth0.1) entered forwarding state
CFE> show devices Device Name Description ------------------- --------------------------------------------------------- uart0 NS16550 UART at 0x18000300 uart1 NS16550 UART at 0x18000400 flash0 ST Serial flash size 512KB flash0.boot ST Serial flash offset 00000000 size 256KB flash0.trx ST Serial flash offset 00040000 size 1KB flash0.os ST Serial flash offset 0004001C size 224KB flash0.nvram ST Serial flash offset 00078000 size 32KB flash1.boot ST Serial flash offset 00000000 size 256KB flash1.trx ST Serial flash offset 00040000 size 224KB flash1.nvram ST Serial flash offset 00078000 size 32KB nflash0.trx Samsung NAND flash offset 00000000 size 1KB nflash0.os Samsung NAND flash offset 0000001C size 131072KB nflash1.trx Samsung NAND flash offset 00000000 size 121856KB nflash1.brcmnand Samsung NAND flash offset 07700000 size 9216KB eth0 Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller
DEF-p_wireless_eth1_11a-crypto=aes DEF-p_wireless_eth2_11bg-crypto=aes boardrev=0x1204 et0macaddr=10-6F-3F-81-0F-79 4331_cckbw20ul2gpo=0x0000 boot_wait=off watchdog=3000 et0mdcport=0 43a2_mcsbw805glpo=0x11111111 hw_rev=0 reset_gpio=5 pmon_ver=CFE 6.30.15-1.04 vlan2ports=0 8 43a2_mcsbw805ghpo=0xffffffff gpio4=robo_reset sromrev=8 boardtype=0xf52e 43a2_mcsbw405glpo=0x11111111 4331_cckbw202gpo=0x0000 lan_netmask=255.255.255.0 43a2_mcsbw405ghpo=0xffffffff nvram_version=1.00 region=EU vlan2hwname=et0 pmon_date=Tue Apr 24 09:04:01 JST 2012 DEF-p_wireless_eth1_11a-authmode=psk xtalfreq=25000 boardflags2=0x0 DEF-p_wireless_eth1_11a-wpapsk=sxx6kh45ruae7 wait_time=3 DEF-p_wireless_eth2_11bg-wpapsk=sxx6kh45ruae7 melco_id=RD_BB11119 wl_dmatxctl=0x24c0040 43a2_maxp5ga0=42,100,100,42 43a2_maxp5ga1=42,100,100,42 43a2_maxp5ga2=42,100,100,42 wl_dmarxctl=0x24c0000 4331_mcsbw20ul2gpo=0x00000000 clkfreq=600,300,150 lan_ipaddr=192.168.11.1 vlan1hwname=et0 DEF-p_wireless_eth2_11bg-authmode=psk sdram_config=0x0105 vlan1ports=1 2 3 4 8* boardflags=0x110 wandevs=vlan2 DEF-p_wireless_eth1_11a-authmode_ex=wpa2-psk sdram_refresh=0x0000 sdram_ncdl=0x00000000 4331_mcs32po=0x0000 pincode=32111958 product=WZR-D1800H DEF-p_wireless_eth2_11bg-authmode_ex=wpa2-psk 43a2_mcsbw205glpo=0x00000000 et0phyaddr=30 wl_pcie_mrrs=128 landevs=vlan1 wl0 wl1 4331_maxp2ga0=42 4331_maxp2ga1=42 4331_maxp2ga2=42 43a2_mcsbw205ghpo=0xffffffff 4331_legofdmbw20ul2gpo=0x00000000 43a2_mcsbw1605glpo=0x00000000 sdram_init=0x0000 43a2_mcsbw1605ghpo=0xffffffff 4331_legofdmbw202gpo=0x00000000 4331_mcsbw402gpo=0x11111111 custom_id=0 boardnum=00 4331_mcsbw202gpo=0x00000000 bootflags=1 size: 1668 bytes (31100 left) *** command status = 0
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel