Hi,
Sorry for the delay, I will send the updated patch ASAP.
Regards,
Thomas
On Sat, 2021-10-30 at 21:04 +0200, Adrian Schmutzler wrote:
> Hi,
>
> Generally fine, a few remarks below.
>
> Should be good to merge after those are resolved.
>
> [..]
>
> Best
>
> Adrian
>
>
___
er
> Subject: [PATCH] ramips: add support for Wavlink WL-WN576A2
>
> From: Thomas Aldrian
>
> This commit adds support for the Wavlink WL-WN576A2 wall-plug wireles
> repeater / router. It is also sold under the name SilverCrest SWV 733 B1.
Generally fine, a few remarks below.
Hi Thomas,
you are right, in the meantime I noticed that the reset button does not work.
I had overlooked the difference in the 5/6 of the name, but still, your image
made the device work nicely as an AP just like that. I'll look at the LEDs, too
and
maybe submit a separate patch. Sorry for the
The WN575A2 shares many of the same internals with the WN576A2 (same
SoC and same wifi chip). However, I do not think it would be
appropriate to add it as an alternative vendor as the default
configuration would be suboptimal.
The WN576A2 has only one ethernet port, while I believe your device has
Hi,
I tested this on a Renkforce WS-WN575A2 and it works nicely.
What I looked at was partitioning, GPIOs, WiFi and Switch setup.
Would it be possible to add an ALT1_VENDOR for this Renkforce device?
You may add a "Tested-by".
Cheers,
Birger
On 05/07/2021 18:12, dev.aldr...@gmail.com wrote:
From: Thomas Aldrian
This commit adds support for the Wavlink WL-WN576A2 wall-plug wireles
repeater / router. It is also sold under the name SilverCrest SWV 733 B1.
Device specs:
- CPU: MediaTek MT7628AN
- Flash: 8MB
- RAM: 64MB
- Bootloader: U-Boot
- Ethernet: 1x 10/100 Mbps
- 2.4 GHz: b/g/n S
