Hello Sander,
On 7/18/20 10:40 PM, Sander Vanheule wrote:
> Hi David,
>
> On Sat, 2020-07-18 at 21:45 +0200, David Bauer wrote:
>>> + gmac-config {
>>> + device = <&gmac>;
>>> +
>>> + rgmii-ge0 = <1>;
>>> + ge0-sgmii = <1>;
>>> + rxdv-delay = <3>;
>>> +
Hi David,
On Sat, 2020-07-18 at 21:45 +0200, David Bauer wrote:
> > + gmac-config {
> > + device = <&gmac>;
> > +
> > + rgmii-ge0 = <1>;
> > + ge0-sgmii = <1>;
> > + rxdv-delay = <3>;
> > + rxd-delay = <3>;
>
> This does not make a lot of sense
Hi Sander,
On 7/17/20 1:37 PM, Sander Vanheule wrote:
> TP-Link has developed a number of access points based on the AP152
> reference board. In the EAP-series of 802.11ac access points, this
> includes the following devices with one ethernet port:
> * EAP225 v1/v2
> * EAP225 v3
> * EAP225-Outdoor
On Sat, 2020-07-18 at 13:03 +0200, m...@adrianschmutzler.de wrote:
> > I tried 80MHz and 65MHz, but that didn't result in proper reads.
> > 50MHz,
> > 55MHz, and 60MHz do appear to work on my eap245-v1, so I really
> > wouldn't
> > risk going above 50MHz.
>
> If you've taken the 25 MHz somewhere r
> I tried 80MHz and 65MHz, but that didn't result in proper reads. 50MHz,
> 55MHz, and 60MHz do appear to work on my eap245-v1, so I really wouldn't
> risk going above 50MHz.
If you've taken the 25 MHz somewhere reasonable, as you stated, I'd also be
fine with that.
My motivation is mainly to pr
On Fri, 2020-07-17 at 14:49 +0200, m...@adrianschmutzler.de wrote:
> Hi,
Hi Adrian,
Thanks for the quick feedback.
> > diff --git
> > a/target/linux/ath79/dts/qca9563_tplink_eap2x5_1port.dtsi
> > b/target/linux/ath79/dts/qca9563_tplink_eap2x5_1port.dtsi
> > new file mode 100644
> > index 000
Hi,
> -Original Message-
> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
> On Behalf Of Sander Vanheule
> Sent: Freitag, 17. Juli 2020 13:38
> To: openwrt-devel@lists.openwrt.org
> Cc: Sander Vanheule ; m...@bibbl.com;
> julien.dus...@free.fr; j...@phrozen.org; ra...
