On 21/08/2020 15:38, Jordan Sandri wrote:
> Hello,
> I would like to know if it is possible to add a wifi network interface
> to an OVS bridge? Let me explain first what I achieved.
> As you can see in the first diagram I have 2 raspberry pis with an OVS
> bridge and each of them is connected to ON
On 18/09/2019 16:41, calvin.schm...@web.de wrote:
> Hi all,
>
> I tried configuring queues with OpenFlow on ethernet interfaces and it worked
> just fine.
> However if I set a specific queue on a flow with the set_queue action that
> outputs the packet to a wireless interface, it somehow is igno
ed, Aug 7, 2019, 2:52 AM Matthias May via discuss
> mailto:ovs-discuss@openvswitch.org>>
> wrote:
>
> On 06/08/2019 17:12, Felipe Arturo Polanco wrote:
> > Hello,
> >
> > This is for a hosting environment where we are using OVS bridges with
>
On 06/08/2019 17:12, Felipe Arturo Polanco wrote:
> Hello,
>
> This is for a hosting environment where we are using OVS bridges with KVM.
>
> I have two interfaces bonded together with LACP and allowing two vlans.
> VLAN 500 public and vlan 400 private.
> The native vlan for this trunk port is Vl
On 14/05/2019 07:26, Kevin Olbrich wrote:
> Hi!
>
> I've got an OVS that has a bridge "br0" and has about 100x L2TP tunnels.
> These tunnels run batman-adv, a mesh protocol for L2 routing over L3.
>
> For efficient routing, only nodes that are in the same building are allowed
> to see each other.
On 14/02/2019 16:48, Ben Pfaff wrote:
> On Wed, Feb 13, 2019 at 08:43:56AM +0100, Matthias May via discuss wrote:
>> Hi
>> I've run into the situation where I need to receive/transmit VLAN-tagged
>> RSTP frames.
>>
>> I can not find any information on a
Hi
I've run into the situation where I need to receive/transmit VLAN-tagged RSTP
frames.
I can not find any information on anyone ever doing that with OVS.
Any pointers on how to do that?
What I've tried so far:
A rule on the bridge in question:
ovs-ofctl add-flow br0 "table=0 priority=2000
dl_
On 17/07/18 07:03, karthik karra wrote:
> Hi All,
>
> How to configure manual rules in OVS when port numbers of OVS of virtual
> machines when re-connected changes than the previous one ?
>
> Below is the output after running twice. The port numbers its taking is not
> deterministic.
>
> /openvs
On 27/04/18 14:20, Paul Greenberg wrote:
>
> When IPv6 is disables in `/boot/grub2/grub.cfg`:
>
> ```
> linux16 ... ipv6.disable=1
> ```
>
> Then GENEVE interface does not come up properly.
>
> ```
> # ovs-vsctl show
> Port "ovn-14a54f-0"
> Interface "ovn-14a54f-0"
>
Hi
I'm observing some strange behaviour when configuring RSTP in combination with
internal interfaces other than the br
interface itself.
I have 3 interfaces (eth0, 1, 2)
eth1 and eth2 are used with other devices to form a ring (hence rstp is in use).
Since eth1 and eth2 are connected to a hardwa
On 03/08/17 13:59, fukaige wrote:
> Hi all:
>
> Recently, I met a confusing problem when using ovs-2.5.2. When a device fail
> to be attach to ovs bridge, I still can get
> the port using “ovs-vsctl show”.
>
> As I see it, we should remove the port’s configuration in ovsdb when failed
> to atta
On 27/06/17 23:40, Ben Pfaff wrote:
> On Tue, Jun 20, 2017 at 02:16:36PM +0200, Matthias May wrote:
>> Hi
>>
>> I need to modify the tos field of ipv4 frames.
>> The rule I currently have for this looks something like:
>> ovs-ofctl add-flow br0-wlan0 "table=20
Hi
I need to modify the tos field of ipv4 frames.
The rule I currently have for this looks something like:
ovs-ofctl add-flow br0-wlan0 "table=20 priority=100 dl_type=0x0800 nw_tos=32
actions=mod_nw_tos:224"
I only want to match the upper most 3 bits of the DSCP field. This rule as it
is has th
13 matches
Mail list logo