On Wed, Nov 22, 2017 at 09:50:54AM +0000, 王志克 wrote: > Hi All, > > I want to set QoS with guide from below link “egress traffic shaping”, but do > not know how for tunnel mode. > http://docs.openvswitch.org/en/latest/faq/qos/ > > My scenario: > > I have several VM ports, and several VxLan ports in br0, and there is one > seprate eth0 port (not in br0), which is the underlay port of Vxlan port. > Currently I add rule to match VM traffic to certain Vxlan port, and all these > vxlan ports would go out through eth0. > > Now I want to enable egress traffic shaping, eg: > VM1 goes out with min_rate=10M, max_rate=100M. > VM2 goes out with min_rate=50M, max_rate=200M. > > In the given example in http://docs.openvswitch.org/en/latest/faq/qos/ > chapter “egress traffic shaping”, it directly uses the physical port. But in > tunnel case, I can NOT specify the physical port directly. > So how to configrue egress traffic shaping in tunnel case? Appreciate some > example configruation. Thanks.
You would want to configure shaping on the physical output port in this case. _______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss