Depends a lot on the motor. If it's an induction motor (quiet) you
basically need variable frequency drive (VFD), if it's a universal motor
(noisy) a light dimmer will work fine (if it is rated for inductive
loads). If it is a squirrel cage or shaded pole, you really can only use
the speeds i
frequency inverter could work ok (not one wire)
2008/11/10 Donald J. Organ IV <[EMAIL PROTECTED]>
> Does anyone have any information regarding this??
>
> - Original Message -
> From: "Mike Zimmerman" <[EMAIL PROTECTED]>
> To: owfs-developers@lists.sourceforge.net
> Sent: Saturday, Novembe
That would allow us to control the amount of voltage going to a device??
- Original Message -
From: "Mark Richards" <[EMAIL PROTECTED]>
To: owfs-developers@lists.sourceforge.net
Sent: Monday, November 10, 2008 4:03:56 PM GMT -05:00 US/Canada Eastern
Subject: Re: [Owfs-developers] con
On Mon, 2008-11-10 at 15:37 -0500, Donald J. Organ IV wrote:
> Does anyone have any information regarding this??
>
> - Original Message -
> From: "Mike Zimmerman" <[EMAIL PROTECTED]>
> To: owfs-developers@lists.sourceforge.net
> Sent: Saturday, November 8, 2008 8:48:23 PM GMT -05:00 US/Can
Michael beat me to it...
We don't use the 2406's for switching at all; its all about detecting.
I did not try the p8 build, but the 2.7p4 definately has the problem,
and 2.6p7 does not. I tried to build the 2.7p8, but the gentoo ebuild
failed (something appears to have changed in the configure s
Does anyone have any information regarding this??
- Original Message -
From: "Mike Zimmerman" <[EMAIL PROTECTED]>
To: owfs-developers@lists.sourceforge.net
Sent: Saturday, November 8, 2008 8:48:23 PM GMT -05:00 US/Canada Eastern
Subject: [Owfs-developers] control voltage on 110v ac ci
Hi Paul,
I will check the new version later this week.
But the problem was not with switching (PIO), but with sensing (sensed). Our
switches work fine, but the one unit where we sense the current of the lamp
(also using ds2406) always reports sensed.A=1 (and sensed.B for that matter,
but nothing
