Re: [Owfs-developers] Help with DS2408 LCD_H/onoff

Dnia 11-01-2012 o 21:36:42 Markus Gaugusch napisał(a): >> As for garbage, I had lots of it...until I remembered to add pull-ups >> on the >> i/o lines. No more garbage anymore. > How much do you use? I used 22k resistors. I have 10k resistor ladder in my LCD. >> I currently have about 25 sens

Re: [Owfs-developers] Help with DS2408 LCD_H/onoff

Hi Bruce! On Jan 10, brucek wrote: > I have a few simple scripts that are writing to the display using the > screenyx. It seems to fun fine for awhile...and then the screen goes blank. > If I send a clear (via owhhtpd) the display wakes up and continues to > runfor awhile. Clearing the di

Re: [Owfs-developers] Help with DS2408 LCD_H/onoff

Dnia 10-01-2012 o 20:02:44 Markus Gaugusch napisał(a): I also have a Hoby borads type of display. Mine is 2x16. It's made on a standard board. It seems pretty reliable I refresh it every 10 minutes and it runs for months. I refresh it by writing 1 to LCD_H/clear and then I write first and sec

Re: [Owfs-developers] Help with DS2408 LCD_H/onoff

riginal Message- From: Markus Gaugusch [mailto:mar...@gaugusch.at] Sent: Tuesday, January 10, 2012 2:03 PM To: OWFS (One-wire file system) discussion and help Subject: Re: [Owfs-developers] Help with DS2408 LCD_H/onoff Hi Bruce, Interesting question! I built one myself and I also had that problem.

Re: [Owfs-developers] Help with DS2408 LCD_H/onoff

Hi Bruce, Interesting question! I built one myself and I also had that problem. But even worse, my display doesn't work very reliable. After using screenyx for a few times, the LCD only showed garbage and I had to restart owserver to get it into a sane state again. Did you experience that too?

[Owfs-developers] Help with DS2408 LCD_H/onoff

I have an LCD I put together based on the hobbyboard design, and I cant for the life of me figure out what the LCD_H/onoff wants to see. LCD_H/onoff write-only, unsigned Sets several screen display functions. The selected choices should be a