ECTED] On Behalf Of suman-
>> Sent: den 16 september 2007 06:15
>> To: owfs-developers@lists.sourceforge.net
>> Subject: Re: [Owfs-developers] MIPS vs MIPSEL in OWFS
>>
>>
>>
>> Yes, Christian, serial interface in my AP is in TTL level, where I can
--Original Message-
> From: [EMAIL PROTECTED] [mailto:owfs-
> [EMAIL PROTECTED] On Behalf Of suman-
> Sent: den 16 september 2007 06:15
> To: owfs-developers@lists.sourceforge.net
> Subject: Re: [Owfs-developers] MIPS vs MIPSEL in OWFS
>
>
>
> Yes, Christian, seria
njh, just tried local echoing by shorting Tx and Rx with 9-25 converter ...
works fine.
So, /dev/ttyS0 is OK.
njh-2 wrote:
>
> On Sat, 15 Sep 2007, suman- wrote:
>
>> Any suggestion why am I not getting any info?
>
> I don't see any problems with your layout, a quick check to make
On Sat, 15 Sep 2007, suman- wrote:
> Any suggestion why am I not getting any info?
I don't see any problems with your layout, a quick check to make sure you
have the serial port working is to stick a wire connecting pins 2 and 3.
Then in serialport tool of choice (gtkterm is reasonable) turn of
OK, Paul, as I told Christian before:
This is precisely how my devices are connected:
PC's DB9M (PC's standard 9-pin male) <---> DB9F-to-DB25M (a standard 9-pin
to 25-pin converter) <---> DS9097E (Maxim's 25 pin Serial Adapter with a
RJ11 port) <---> RJ11 cable <---> DS2781K (Maxim's voltage
>
>
>
> Read some more about serial-console cable at:
>
> http://wiki.openwrt.org/OpenWrtDocs/Hardware/Netgear/WGT634U#head-6128a64e71
> f6af2e38e2b1e0066d8b3c08d62d2a
>
>
>
>
>
> /Christian
>
>
>
>
>
> From: [EMAIL PROTECTED]
> [
On Sun, 16 Sep 2007, Christian Magnusson wrote:
> Of course... but I just thought that it was more likely that suman had a
> max3232 at home, compared to a ds2450 :)
> The problem should be the signal level in this case.
If they own a DS9xxx serial port transceiver, they own a ds2450. You can
o
nterface or USB
interface instead
/Christian
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:owfs-
> [EMAIL PROTECTED] On Behalf Of njh
> Sent: den 15 september 2007 17:02
> To: owfs-developers@lists.sourceforge.net
> Subject: Re: [Owfs-developers] MIPS vs MIPSEL
>
> Lets be systematic.
> DS9097 or DS9097U
> Any problems with permissions? (root?)
> Try running with --error_level=9 --foreground and look at the starting
> messages.
>
> On 15 Sep 2007 01:05:34 -, *suman sarkar* <[EMAIL PROTECTED]>
> wrote:
>
>
> I tried some voltage sensing with DS2781K M
On Sat, 15 Sep 2007, Christian Magnusson wrote:
> BTW: isn't your serial interface in TTL levels? Then you have to get a
> converter, such as MAX3232
However, the Max232 uses a fair amount of power to drive the charge pumps,
which you would then just be throwing away.
If you just used a DS2480
ial-console cable at:
http://wiki.openwrt.org/OpenWrtDocs/Hardware/Netgear/WGT634U#head-6128a64e71
f6af2e38e2b1e0066d8b3c08d62d2a
/Christian
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
Alfille
Sent: den 15 september 2007 07:25
To: owfs-developers@lists.sourceforge.net
Lets be systematic.
DS9097 or DS9097U
Any problems with permissions? (root?)
Try running with --error_level=9 --foreground and look at the starting
messages.
Paul Alfille
On 15 Sep 2007 01:05:34 -, suman sarkar <[EMAIL PROTECTED]>
wrote:
>
>
> I tried some voltage sensing with DS2781K Maxim
I tried some voltage sensing with DS2781K Maxim chip, which is connected
to a DS9097 serial adapter through RJ11. I\'ve installed all necessary
software, but not been able to pull out any information from the mounted
directory (/mnt/1wire). My laptop\'s serial port is set to baud rate
9600. He
Thanks, Christian.
I'll try it out, and get back to you soon.
Suman-
suman- wrote:
>
> Hi,
> I installed openwrt (kamikaze) with MIPS (i.e. big endian) for my
> AP.
> Now I\'ve a difficulty in installing OWFS in the AP.
> All the openwrt OWFS packages are for MIPSEL (i.e. littl
gt;
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of suman
> sarkar
> Sent: den 6 september 2007 22:56
> To: owfs-developers@lists.sourceforge.net
> Subject: [Owfs-developers] MIPS vs MIPSEL in OWFS
>
>
>
> Hi,
>
> I installed openwrt
mailto:[EMAIL PROTECTED] On Behalf Of
Christian Magnusson
Sent: den 7 september 2007 20:05
To: owfs-developers@lists.sourceforge.net
Subject: Re: [Owfs-developers] MIPS vs MIPSEL in OWFS
I guess it's Atheros with 2.6-kernel you use. It was the only MIPS target I
found in kamikaze 7.07. I&
1
To: owfs-developers@lists.sourceforge.net
Subject: Re: [Owfs-developers] MIPS vs MIPSEL in OWFS
BTW: What kind of AP do you have?
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of suman
sarkar
Sent: den 6 september 2007 22:56
To: owfs-developers@lists.sourceforge.n
BTW: What kind of AP do you have?
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of suman
sarkar
Sent: den 6 september 2007 22:56
To: owfs-developers@lists.sourceforge.net
Subject: [Owfs-developers] MIPS vs MIPSEL in OWFS
Hi,
I installed openwrt (kamikaze) with MIPS
developers@lists.sourceforge.net
Subject: [Owfs-developers] MIPS vs MIPSEL in OWFS
Hi,
I installed openwrt (kamikaze) with MIPS (i.e. big endian) for my AP.
Now I've a difficulty in installing OWFS in the AP.
All the openwrt OWFS packages are for MIPSEL (i.e. little endian), a
I would appreciate your help, if anyone can help me out finding a MIPS OWFS
ipkg (instead of MIPSEL OWFS).
Thanks.
--
View this message in context:
http://www.nabble.com/MIPS-vs-MIPSEL-in-OWFS-tf4382186.html#a12492349
Sent from the OWFS - Dev mailing list archive at Nabble.com.
-
Hi,
I installed openwrt (kamikaze) with MIPS (i.e. big endian) for my AP.
Now I\'ve a difficulty in installing OWFS in the AP.
All the openwrt OWFS packages are for MIPSEL (i.e. little endian), and
not for MIPS.
Can anyone help me out? Where do I get MIPS (and NOT MIPSEL) ipkg
for OWFS?
21 matches
Mail list logo
