Am Donnerstag, 16. Juni 2005 12:48 schrieb Serg Oskin:
> "JK" == Jan Kandziora wrote:
>
> JK> Serg (and anybody else who may it concern),
> JK> I got some problems with owtcl (owfs-2.1p0RC-1). I connected a single
> DS2406 JK> to an 1-Wire/USB-adapter and used owtcl to control a single LED,
> hoo
"JK" == Jan Kandziora wrote:
JK> Serg (and anybody else who may it concern),
JK> I got some problems with owtcl (owfs-2.1p0RC-1). I connected a single
DS2406
JK> to an 1-Wire/USB-adapter and used owtcl to control a single LED, hooked up
on
JK> its PIO pin. Unfortunately, it works *a little
Am Dienstag, 14. Juni 2005 10:23 schrieb Serg Oskin:
> "JK" == Jan Kandziora wrote:
>
> JK> Am Dienstag, 14. Juni 2005 08:42 schrieb Alfille, Paul H.,M.D.:
> >> Sounds like something we need to track down.
> >>
> >> However, you are getting the error 2-3 times/day. Jan gets it after a
> >> few
"JK" == Jan Kandziora wrote:
JK> Am Dienstag, 14. Juni 2005 08:42 schrieb Alfille, Paul H.,M.D.:
>> Sounds like something we need to track down.
>>
>> However, you are getting the error 2-3 times/day. Jan gets it after a few
>> seconds.
>>
JK> And I don't get *any* USB error messages, ple
Am Dienstag, 14. Juni 2005 08:42 schrieb Alfille, Paul H.,M.D.:
> Sounds like something we need to track down.
>
> However, you are getting the error 2-3 times/day. Jan gets it after a few
> seconds.
>
And I don't get *any* USB error messages, please don't forget this.
Kind regards
Jan
@lists.sourceforge.net
Subject: Re: [Owfs-developers] owtcl and writing data
Paul,
I such had 2-3 times per day at execution "ls /mnt/1wire" every second
(without owtcl).
In the beginning there were delays in work owfs (1wire) and there were
messages of a kernel "... bulk ... failed...
Paul,
I such had 2-3 times per day at execution "ls /mnt/1wire" every second
(without owtcl).
In the beginning there were delays in work owfs (1wire) and there were
messages of a kernel "... bulk ... failed... ". Then occured such:
...
kernel: usb ... reset
kernel: usb 1-7: USB disconnect
Am Montag, 13. Juni 2005 15:25 schrieb Paul Alfille:
> Actually, one thought (with the new version pulled from the CVS)
> enable error messages:
>
> (For the script version with goes to the command line)
> /opt/owfs/bin/owfs --foreground --error_level=9 -u /mnt/1wire
>
> Then on another screen run
Actually, one thought (with the new version pulled from the CVS)
enable error messages:
(For the script version with goes to the command line)
/opt/owfs/bin/owfs --foreground --error_level=9 -u /mnt/1wire
Then on another screen run the previous script
while: ; to blink
At least we'll see w
I'm at a bit of a loss -- just downloaded that version and ran the script --
still works.
Paul
On Monday 13 June 2005 06:15 am, Jan Kandziora wrote:
> Am Montag, 13. Juni 2005 11:44 schrieb Jan Kandziora:
> > > 4. Hardware problem.
> >
> > I'll try another USB adaptor.
>
> Tried - no difference.
Am Montag, 13. Juni 2005 11:44 schrieb Jan Kandziora:
>
> > 4. Hardware problem.
>
> I'll try another USB adaptor.
>
Tried - no difference.
Jan
---
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projecto
Am Montag, 13. Juni 2005 01:30 schrieb Serg Oskin:
> > Please teak a look into the test code below. The first 10 to 70 (varies)
> > cycles of the loop the LED blinks but I get an
> >
> > unknown error 4294967295
> >
> > After about 2..5s (varies), I get an
> >
> > invalid argument
> >
> > And the D
Am Montag, 13. Juni 2005 03:27 schrieb Paul Alfille:
> > After about 2..5s (varies), I get an
> >
> > invalid argument
> >
> > And the DS2406 output does not change any more. Any more info needed?
> >
> > Kind regards
> >
> > Jan
>
> Works fine from Shell scripts.
>
> DS9490 USB adapter.
> Newe
On Saturday 11 June 2005 04:53 pm, Jan Kandziora wrote:
> Serg (and anybody else who may it concern),
>
> I got some problems with owtcl (owfs-2.1p0RC-1). I connected a single
> DS2406 to an 1-Wire/USB-adapter and used owtcl to control a single LED,
> hooked up on its PIO pin. Unfortunately, it wor
Sat, 11/06/2005 в 22:53 +0200, Jan Kandziora wrote:
> Serg (and anybody else who may it concern),
>
> I got some problems with owtcl (owfs-2.1p0RC-1). I connected a single DS2406
> to an 1-Wire/USB-adapter and used owtcl to control a single LED, hooked up on
> its PIO pin. Unfortunately, it wor
Am Sonntag, 12. Juni 2005 03:55 schrieb Paul Alfille:
> On Saturday 11 June 2005 04:53 pm, Jan Kandziora wrote:
> > Serg (and anybody else who may it concern),
> >
> > I got some problems with owtcl (owfs-2.1p0RC-1). I connected a single
> > DS2406 to an 1-Wire/USB-adapter and used owtcl to control
On Saturday 11 June 2005 04:53 pm, Jan Kandziora wrote:
> Serg (and anybody else who may it concern),
>
> I got some problems with owtcl (owfs-2.1p0RC-1). I connected a single
> DS2406 to an 1-Wire/USB-adapter and used owtcl to control a single LED,
> hooked up on its PIO pin. Unfortunately, it wor
Serg (and anybody else who may it concern),
I got some problems with owtcl (owfs-2.1p0RC-1). I connected a single DS2406
to an 1-Wire/USB-adapter and used owtcl to control a single LED, hooked up on
its PIO pin. Unfortunately, it works *a little bit*, so I think I found a
serious bug in owtcl o
18 matches
Mail list logo
