Hi,
I finally succeed to make a 4 nodes cluster with Fedora10+
and Pacemaker + Openais (and Drbd as test but not for production)
So if anyone want I write a wiki article let me know,
I will try to find time to do it.
Regards
Franck Chionna
___
Pacema
Am Dienstag, 13. Oktober 2009 16:16:39 schrieb Martin Gerhard Loschwitz:
> Folks,
>
> once again I announce another set of packages; given that corosync
> has so far proven to be a moving target, I decided that at least
> for the moment, the packages for lenny are going to be openais with
> whiteta
Am Tue, 13 Oct 2009 16:16:39 +0200 schrieb Martin Gerhard Loschwitz:
> Folks,
>
> once again I announce another set of packages; given that corosync has
> so far proven to be a moving target, I decided that at least for the
> moment, the packages for lenny are going to be openais with whitetank
>
Am Tue, 13 Oct 2009 16:16:39 +0200 schrieb Martin Gerhard Loschwitz:
> Folks,
>
> once again I announce another set of packages; given that corosync has
> so far proven to be a moving target, I decided that at least for the
> moment, the packages for lenny are going to be openais with whitetank
>
On Wed, Oct 14, 2009 at 5:40 PM, Andrew Beekhof wrote:
> On Wed, Oct 14, 2009 at 5:15 PM, Lars Ellenberg
> wrote:
>> On Wed, Oct 14, 2009 at 04:31:08PM +0200, Andrew Beekhof wrote:
>
>>> Anyone know a good PDF->HTML tool?
>>
>> If you had it in docbook xml,
>> conversion to pdf or html would be a
- Original Message -
From: "Andrew Beekhof"
To:
Cc:
Sent: Sunday, October 11, 2009 4:04 PM
Subject: Re: [Pacemaker] failback off
Should be. Did you try it?
On Wed, Oct 7, 2009 at 5:36 PM, E-Blokos wrote:
Hi,
Is it possible to have a resource-stickiness in clone or group
meta-
Le 14 octobre 2009 10:20:12, Andrew Beekhof a écrit :
> On Wed, Oct 14, 2009 at 4:18 PM, Andrew Beekhof wrote:
> > try migrate-to :-)
> > we tried to standardize on dashes since 1.0.
>
> doh, almost right. right reason, wrong field: you want on-fail not on_fail
on_fail and on-fail both seem to
Hello,
I have a config like this:
Online: [ int3.test.tst wor1.test.tst wor2.test.tst wor3.test.tst int1.test.tst
int2.test.tst ]
ip1 (ocf::heartbeat:IPaddr):Started int1.test.tst
ip2 (ocf::heartbeat:IPaddr):Started int2.test.tst
ip3 (ocf::heartbeat:IPaddr):S
Hi Andrew,
On Wed, 2009-10-14 at 16:46 +0200, Andrew Beekhof wrote:
> > The distro is non-standard. I don't see how this would be different on
> > OpenSuSE? Do they use untagged (or specifically tagged) versions?
>
> I just built the lot (same versions as above) on OSX, and its fine here.
Ok...
On Wed, Oct 14, 2009 at 5:15 PM, Lars Ellenberg
wrote:
> On Wed, Oct 14, 2009 at 04:31:08PM +0200, Andrew Beekhof wrote:
>> Anyone know a good PDF->HTML tool?
>
> If you had it in docbook xml,
> conversion to pdf or html would be a nobrainer, right?
Right.
People couldn't possibly write a few do
Hi,
On Wed, Oct 14, 2009 at 06:20:42PM +0300, Stratos Zolotas wrote:
> Something new!
>
> After cleaning everything, and started from scratch. I'm up an running (some
> sort).
Really glad to hear that you're making progress.
> I'm getting this on the logs and drbd does no start:
>
> Oct 14
On Wed, Oct 14, 2009 at 04:31:08PM +0200, Andrew Beekhof wrote:
> 2009/10/14 Motoharu Kubo :
> > Dear Mr. Andrew Beekhof,
> >
> > I would like to translate your "Pacemaker Configuration Explained" into
> > Japanese for my business and for Japanese users. Could you permit me to
> > translate your d
On Wed, October 14, 2009 4:36 pm, Andrew Beekhof wrote:
> On Wed, Oct 14, 2009 at 4:12 PM, Lars Ellenberg
> wrote:
>
>>
>>
>> with below config, according to documentation, ms_res_Stateful_1 should
>> only be started, not promoted.
>>
>> but it gets promoted nontheless.
>>
>> Config bug?
>> Docume
On Wed, Oct 14, 2009 at 4:39 PM, Fausto Lombardi wrote:
> Oh. but if I want that the resources in a group start without
> order and if one crashs the others still remain active?
"don't use a group then"
___
Pacemaker mailing list
Pacemaker@oss.clus
On Wed, Oct 14, 2009 at 11:37 AM, Johan Verrept wrote:
> On Wed, 2009-10-14 at 10:58 +0200, Andrew Beekhof wrote:
>> You're using the RPMs from the opensuse build service?
>> Which distro?
>
> I build from source, following the wiki. All the packages are the tips
> from yesterday (only pacemaker i
Oh. but if I want that the resources in a group start without
order and if one crashs the others still remain active?
2009/10/13 Johan Verrept :
> On Tue, 2009-10-13 at 17:49 +0200, Fausto Lombardi wrote:
>> Hi of all,
>> can I do a group where the resources in it start in sequence and if
>>
Hi,
On Wed, Oct 14, 2009 at 05:31:09PM +0300, Stratos Zolotas wrote:
> If i change pacemaker version to "1" from "0" in the openais.conf, openais
> is started without errors, but the crm cannot connect to cluster.
>
> Which is the difference between "1" and "0" on the "ver" parameter of
> pacemak
On Wed, Oct 14, 2009 at 4:12 PM, Lars Ellenberg
wrote:
>
>
> with below config,
> according to documentation,
> ms_res_Stateful_1 should only be started, not promoted.
>
> but it gets promoted nontheless.
>
> Config bug?
> Documentation bug?
> Code bug?
Latter.
Could I trouble you for the xml (wi
If i change pacemaker version to "1" from "0" in the openais.conf, openais
is started without errors, but the crm cannot connect to cluster.
Which is the difference between "1" and "0" on the "ver" parameter of
pacemaker in the openais.con?
Does this mean something? (that openais starts ok).
On
2009/10/14 Motoharu Kubo :
> Dear Mr. Andrew Beekhof,
>
> I would like to translate your "Pacemaker Configuration Explained" into
> Japanese for my business and for Japanese users. Could you permit me to
> translate your doc and publish it?
Absolutely, go for it.
>
> In addition, if possible, co
Hi,
cores are empty
I think i'm on dead end..
Thanks.
On Wed, Oct 14, 2009 at 5:02 PM, Dejan Muhamedagic wrote:
> Hi,
>
> On Wed, Oct 14, 2009 at 04:39:05PM +0300, Stratos Zolotas wrote:
> > Ok, I have installed latest version of pacemaker (1.0.5) from opensuse
> > ha-clustering repo, but
On Wed, Oct 14, 2009 at 4:18 PM, Andrew Beekhof wrote:
> try migrate-to :-)
> we tried to standardize on dashes since 1.0.
doh, almost right. right reason, wrong field: you want on-fail not on_fail
>
> On Wed, Oct 14, 2009 at 2:04 PM, Alain St-Denis
> wrote:
>> Hi,
>>
>> I'm trying to set "on
try migrate-to :-)
we tried to standardize on dashes since 1.0.
On Wed, Oct 14, 2009 at 2:04 PM, Alain St-Denis wrote:
> Hi,
>
> I'm trying to set "on_fail" to "block" for the migrate_to op but it seems it
> is ignored. My reasoning is this: if my server hosts 15 Xen VMs, I don't want
> one faile
with below config,
according to documentation,
ms_res_Stateful_1 should only be started, not promoted.
but it gets promoted nontheless.
Config bug?
Documentation bug?
Code bug?
node sles11-a
node sles11-b
primitive res_Stateful_1 ocf:pacemaker:Stateful
ms ms_res_Stateful_1 res_Stateful_1 \
Hi,
On Wed, Oct 14, 2009 at 04:39:05PM +0300, Stratos Zolotas wrote:
> Ok, I have installed latest version of pacemaker (1.0.5) from opensuse
> ha-clustering repo, but it is not working.
>
> I'm starting openais on the alpha node and i get a lot of messages. On the
> bravo node openais fails to s
Ok, thanks for the pointers.
Colin
___
Pacemaker mailing list
Pacemaker@oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker
When i try to install pacemaker-1.0.5-4.1.x86_64 the system (opensuse 11.1
x86_64) asks to downgrade heartbeat-common-2.99.3-1.6.x86_64 to
cluster-glue-1.0-12.1.x86_64.
Is this ok and normal?
On Wed, Oct 14, 2009 at 3:09 PM, Stratos Zolotas wrote:
> If you remember with the upgraded version pac
If you remember with the upgraded version pacemaker 1.0.5, i'm getting
segfaults on crmd.
I will try it again. From which repo should i upgrade?
Thanks.
On Wed, Oct 14, 2009 at 3:06 PM, Dejan Muhamedagic wrote:
> Hi,
>
> On Wed, Oct 14, 2009 at 01:47:08PM +0300, Stratos Zolotas wrote:
> > Hi,
>
Hi,
On Wed, Oct 14, 2009 at 01:47:08PM +0300, Stratos Zolotas wrote:
> Hi,
>
> all the packages are from the opensuse standard repos.
>
> alpha:/ # /usr/lib64/heartbeat/crmd version
> CRM Version: 1.0.1 (node: 27be064e090742359bbdd1914f9d7dd363c8e0d8)
> alpha:/ #
That's fairly old. Can you plea
Hi,
I'm trying to set "on_fail" to "block" for the migrate_to op but it seems it
is ignored. My reasoning is this: if my server hosts 15 Xen VMs, I don't want
one failed migration (for whatever reason) to take everything with it.
Currently, a failed migration causes a stonith and hence causes a
Hi,
all the packages are from the opensuse standard repos.
alpha:/ # /usr/lib64/heartbeat/crmd version
CRM Version: 1.0.1 (node: 27be064e090742359bbdd1914f9d7dd363c8e0d8)
alpha:/ #
Thanks.
On Wed, Oct 14, 2009 at 1:44 PM, Dejan Muhamedagic wrote:
> Hi,
>
> On Wed, Oct 14, 2009 at 01:30:32PM +0
Hi,
On Wed, Oct 14, 2009 at 01:30:32PM +0300, Stratos Zolotas wrote:
> order mysql_after_drbd inf: ms_drbd_mysql:promote mysql:start
>
> is committed ok, but it doesn't show right in the configuration:
>
> primitive fs_mysql ocf:heartbeat:Filesystem \
> params device="/dev/drbd0" directo
Hi,
On Wed, Oct 14, 2009 at 12:13:42PM +0200, Johan Verrept wrote:
> Sorry, I missed that. Was already wondering why the error was so
> cryptic.
>
> It is definatly possible, I use it myself:
>
> order drbd-before-master-group inf: ms-drbd0:promote master-group:start
>
> And master-group is a g
Sorry, I missed that. Was already wondering why the error was so
cryptic.
It is definatly possible, I use it myself:
order drbd-before-master-group inf: ms-drbd0:promote master-group:start
And master-group is a group with 3 primitives.
Maybe try the inf: instead of the mandatory: ?
FYI, I am on
As you can see in the config, I have a group named mysql that includes
fs_mysql, ip_mysql, mysqld, apache primitives.
The expecting result is to start this group after ms_drbd_mysql is promoted
to one of the nodes.
Is this wrong? Should I try a different approach?
Stratos.
On Wed, Oct 14, 2009
I don't know if it is your only problem but in the order you refer to
primitive "mysql" while in your configuration you have primitive
"mysqld". Note the "d".
Other than that, the order constraint looks like mine.
J.
On Wed, 2009-10-14 at 12:59 +0300, Stratos Zolotas wrote:
> Hello again.
Hello again.
After struggling with the latest versions, i decided to try with the
versions in the standard opesuse repos, that means:
openais 0.80.3
libopenais2 0.80.3
pacemaker 1.0.1
libpacemaker3 1.0.1
heartbeat 2.99.3
heartbeat-common 2.99.3
heartbeat-resources 2.99.3
libheartbeat2 2.99.3
Open
Hi,
On Sat, Oct 10, 2009 at 08:52:36PM -0600, Billy Guthrie wrote:
> Hello,
>
> I am using pacemaker-openais version 1.0.4.1 and I have a
> question; Is it possible to update the MAC address on
> fail-over. I would like to keep the MAC address the same from
> one NIC to the other as I have an app
On Wed, 2009-10-14 at 10:58 +0200, Andrew Beekhof wrote:
> On Wed, Oct 14, 2009 at 9:25 AM, Johan Verrept wrote:
> > On Wed, 2009-10-14 at 08:21 +0200, Andrew Beekhof wrote:
> >> On Tue, Oct 13, 2009 at 6:04 PM, Johan Verrept
> >> wrote:
> >> >
> >> > Hi,
> >> >
> >> > when I install the latest
On Wed, Oct 14, 2009 at 9:25 AM, Johan Verrept wrote:
> On Wed, 2009-10-14 at 08:21 +0200, Andrew Beekhof wrote:
>> On Tue, Oct 13, 2009 at 6:04 PM, Johan Verrept wrote:
>> >
>> > Hi,
>> >
>> > when I install the latest resource-agents, it installs
>> > etc/ha.d/shellfuncs
>> >
>> > This file inc
On 10/11/2009 04:52 AM, Billy Guthrie wrote:
> Hello,
>
> I am using pacemaker-openais version 1.0.4.1 and I have a question; Is
> it possible to update the MAC address on fail-over. I would like
> to keep the MAC address the same from one NIC to the other as I have an
> application that binds th
On Wed, 2009-10-14 at 08:21 +0200, Andrew Beekhof wrote:
> On Tue, Oct 13, 2009 at 6:04 PM, Johan Verrept wrote:
> >
> > Hi,
> >
> > when I install the latest resource-agents, it installs
> > etc/ha.d/shellfuncs
> >
> > This file includes @OCF_RA_DIR@/heartbeat/.ocf-shellfuncs at the end.
>
> Not
42 matches
Mail list logo
