Hi Fabrice,
yes, if I configure directly the vlan 3 on the port, I receive ip address.
Yesterday finally I found the problem, it was the: "mac-vlan enable"
attribute on the interface. This configuration makes exactly the opposite,
if it is enabled, the switch does not assign the vlan to the
Hello Oscar,
what happen if you configure a switch port in the vlan 3 and you plug a
device in, does it receive an ip address ?
Regards
Fabrice
Le 18-10-24 à 05 h 58, Oscar Nogales via PacketFence-users a écrit :
Hi !
anyone with this switch model that has a working 802.1x+MAB with
Hi !
anyone with this switch model that has a working 802.1x+MAB with
packetfence ?
I have a 5 floor building with this model and I need to make it work.
Thanks.
--
Oscar Nogales
Especialista en Comunicaciones y Seguridad
El mié., 17 oct. 2018 a las 17:25, Oscar Nogales ()
escribió:
> Hi
Hi everyone,
I'm working on a NAC deployment with Packetfence in offline mode. I have
working the 802.1x authentication, but I want to do the MAC address
authentication failover in case no 802.1x agent is connected to the switch.
All my switches are HPE V1910-48G Switch with Software Version