[Paraview] New feature- python save state

A new feature is available- save state as a python script. It is still under development but it can be found in cvs. The feature is available in the Trace tab of the python shell. Click the button 'Trace State' to grab the state, then click 'Save Trace' to save it. Then you can go to the Direct

Re: [Paraview] animation PV 3.4.0

OK Berk Geveci wrote: Burlen, Can you please give it another try with head? If not fixed, can you submit a bug report? Thanks. -berk On Fri, Oct 9, 2009 at 3:18 PM, burlen wrote: I recently ran into this using CVS of a couple weeks to a month or so ago. It had to do with state files. Whe

Re: [Paraview] animation PV 3.4.0

Burlen, Can you please give it another try with head? If not fixed, can you submit a bug report? Thanks. -berk On Fri, Oct 9, 2009 at 3:18 PM, burlen wrote: > I recently ran into this using CVS of a couple weeks to a month or so ago. > It had to do with state files. When loading from state file

Re: [Paraview] animation PV 3.4.0

I recently ran into this using CVS of a couple weeks to a month or so ago. It had to do with state files. When loading from state file a time series with more than 100 steps the spin box in the ui would only go up to 99. The animation inspector could be used to select any step though. Maybe it'

Re: [Paraview] Looking for Rectilinear CTH dataset

Alan: Thank you so much. Berk gave me some. -Zhanping On Fri, Oct 9, 2009 at 2:44 PM, Scott, W Alan wrote: > I assume that CTH AMR isn't what you are looking for. > > Alan > > -- > *From:* paraview-boun...@paraview.org [mailto: > paraview-boun...@paraview.

Re: [Paraview] Looking for Rectilinear CTH dataset

I already gave Zhanping a file. -berk On Fri, Oct 9, 2009 at 2:44 PM, Scott, W Alan wrote: > I assume that CTH AMR isn't what you are looking for. > > Alan > > > From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] > On Behalf Of Zhanping Li

Re: [Paraview] Looking for Rectilinear CTH dataset

I assume that CTH AMR isn't what you are looking for. Alan From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On Behalf Of Zhanping Liu Sent: Friday, October 09, 2009 10:44 AM To: paraview@paraview.org Subject: [Paraview] Looking for Recti

Re: [Paraview] animation PV 3.4.0

I just opened up a case file that has about 500 steps in it. I went to step 101, and it worked fine. Alan > -Original Message- > From: paraview-boun...@paraview.org > [mailto:paraview-boun...@paraview.org] On Behalf Of Berk Geveci > Sent: Friday, October 09, 2009 8:43 AM > To: Stephen

[Paraview] Looking for Rectilinear CTH dataset

Hi ParaViewers: Does anybody has a shareable rectilinear CTH dataset for test purposes? Thanks. -Zhanping -- Zhanping Liu, PhD Kitware, Inc. 28 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-371-3971 x 138 http://www.zhanpingliu.org __

[Paraview] Descriptive statistics over time?

Hello again, I love all the new statistics additions to PV, but I was wondering if there is a way to plot the computed values over time? Say I calculate the mean value of some data attribute using Descriptive Statistics, is there a way of plotting this value over time? It looks like Plot Da

Re: [Paraview] animation PV 3.4.0

If it does, please someone let us know. That would definitely be a bug that should be fixed. -berk On Fri, Oct 9, 2009 at 9:26 AM, Stephen Wornom wrote: > Does PV still have the 100 time step data limit? > Stephen > > -- > stephen.wor...@sophia.inria.fr > 2004 route des lucioles - BP93 > Sophia

Re: [Paraview] Problems using Paraview 3.6.1 on a linux cluster

Your X is going over ssh back to the machine you connected from. If X is running on the server, try setting DISPLAY to :0 (making sure that xauth stuff is setup properly) and run again. Also, this page may be useful: http://paraview.org/Wiki/Setting_up_a_ParaView_Server -berk On Fri, Oct 9, 2009

Re: [Paraview] Plot multiple points over time

Eric, I think this is a bug. Can you report it in the bug tracker pls? Thanks. -berk On Fri, Oct 9, 2009 at 10:28 AM, Eric E. Monson wrote: > Hello, > > I saw in the old 3.4 release notes that "* Added support for plotting > multiple point/cell values over time.", but I think I might be confuse

[Paraview] Plot multiple points over time

Hello, I saw in the old 3.4 release notes that "* Added support for plotting multiple point/cell values over time.", but I think I might be confused about what that means... With CVS PV if I select multiple points (say, by Global ID) in my set of unstructured points, and then do Plot Sele

Re: [Paraview] VTKEdge compilation on Windows 32bit

Hi Berk, Thanks for your reply, This is a fresh install with neither Qt nor PV having been previously installed on the system, so I'm fairly sure there are no conflicts. I compiled 3.6.1 using VC++ just prior to starting the VTKEdge compilation, with the same CMake version and Qt libraries

[Paraview] animation PV 3.4.0

Does PV still have the 100 time step data limit? Stephen -- stephen.wor...@sophia.inria.fr 2004 route des lucioles - BP93 Sophia Antipolis 06902 CEDEX Tel: 04 92 38 50 54 Fax: 04 97 15 53 51 <>___ Powered by www.kitware.com Visit othe

Re: [Paraview] VTKEdge compilation on Windows 32bit

Hi Lucy, Note: Utkarsh, who wrote all of the ParaView plugins in VTKEdge, is on vacation for 3 weeks. It is unlikely that you will get a response from him until he is back. I don't have a lot of experience with Windows either. Are you sure the Qt version and the compiler you are using are matchin

Re: [Paraview] Problems using Paraview 3.6.1 on a linux cluster

It sounds like X is not running? Or DISPLAY is not set? On Fri, Oct 9, 2009 at 4:38 AM, alfacentau...@inwind.it wrote: >> Hi Paolo, >> >> >> If you did a make install, did you compile with VTK_USE_RPATH ON or OFF? >> > >> > VTK_USE_RPATH = OFF (default, I believe) >> > >> >> This probably has som

Re: [Paraview] Segfault on exit()/quit()/raise SystemExit in python script

Hi, In the meantime I found out that the segfault only happens when pvpython is being run inside a NX session (see http://www.nomachine.com/). So, most likely there is nothing wrong with ParaView, I simply need an additional installation compiled with Mesa instead of OpenGL, to be used in NX sessi

Re: [Paraview] issues with Slice filter and interpolation...

Berk Geveci a écrit : > Try setting the representation of the cut to Surface with Edges. > You'll see what I mean. Hmmm, ok. Thanks, Berk. Cheers, -- Fred ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.

Re: [Paraview] Problems using Paraview 3.6.1 on a linux cluster

> Hi Paolo, > > >> If you did a make install, did you compile with VTK_USE_RPATH ON or OFF? > > > > VTK_USE_RPATH = OFF (default, I believe) > > > >> This probably has something to do with not having rpath and not > >> setting LD_LIBRARY_PATH. > > > > How LD_LIBRARY_PATH has to be set? On each

Re: [Paraview] Problems using Paraview 3.6.1 on a linux cluster

Hi Paolo, >> If you did a make install, did you compile with VTK_USE_RPATH ON or OFF? > > VTK_USE_RPATH = OFF (default, I believe) > >> This probably has something to do with not having rpath and not >> setting LD_LIBRARY_PATH. > > How LD_LIBRARY_PATH has to be set? On each node? Try to extend