I personally use a GK-3 (which really is the same as the GK-2) a wired my
own 13-pin to siz 1.4 jacks, which go straight into a Hammerfall Multiface.
The individual signals are quite but not unusably so, maybe around -30 dB
from full amplitude. That works pretty well.
I am planning to switch over
If you don't want to build your own, RMC has a preamp/breakout box
http://www.rmcpickup.com/fanoutbox.html
Slightly expensive though...
On Mar 14, 2008, at 10:02 AM, Miller Puckette wrote:
Hi all,
I believe mine is a GK-2A as well. I built an unbalanced preamp and
power supply, and didn't
Hi List, Hi Miller
i was at Miller's Workshop in Cologne for the LAC 2008.
For those wo were not there:
It was about a new approach for guitar-synthesis within PD and the
setup was
a divided-pickup from Roland, a 6 channel preamplifier (selfmade) and
some new patches in PD.
I am
I am trying to get some more information about which Pickup was used by
Miller (was it the GK-3 ??)
Hi Luigi and list,
here's what I use:
-Roland GK-2A pickup ( http://www.roland.com/products/en/GK-2A/specs.html )
-a homebrew 6-channel preamp which gives 6 balanced line signals that go
Hi all,
I believe mine is a GK-2A as well. I built an unbalanced preamp and
power supply, and didn't get any appreciable hum. (However, I do
sometimes get ground loop trouble batween computers and audio systems
and sometimes have to ground lift my computer and monitor, which is a
bit
Miller Puckette wrote:
Hi all,
(However, I sometimes have to ground lift my computer and monitor, which is a
bit dangerous.)
dear children on this list,
please DO NOT try this at home!
marius.
___
PD-list@iem.at mailing list
UNSUBSCRIBE and
