Hey, the guy is using Arduino, well, you should use a resistance of 1 kohm,
the schedule is the same as I show you, you must use the red wire inside and
black outside your "penny" ... resistance to the ground will be used to
enter the analog, as a ldr, is the same pattern ... You can check it on th
hi,
what's is your circuit, you can filter a bit the hardware, see:
http://www.workinprogress.ca/projects/edubeat/source/
for an example, but in your case if you want only a trig (not velocity)
you can remove the lp filter (C1-R1).
cheers
pat
___
P
try to put some medium sized resistor in series with the piezo and see if it
gets more tangible data input. Piezzos can output very high voltages.
2010/9/20 david lemarechal
> Hi
>
> I think the easier way to get info from the piezo is to plug it in a sound
> card preamp and then use [peakamp~ ]
Hi
I think the easier way to get info from the piezo is to plug it in a sound card
preamp and then use [peakamp~ ]
Otherwise you should do a bit of electronics to transform the tiny AC voltage
of
the piezo output into a DC amplified voltage to match the analog input of
arduino.
You'll have t
