to give some more info:
i had success with wtf2osc which includes a
python script osc2dmx.enttec.py, which is
able to open my device and via osc i am able
to send.
i belief the problem is that dmx512 tries to open
/dev/dmx but my dmx controller is on /dev/ttyUSB0.
erich
-
hi
Erich Berger wrote:
to give some more info:
i had success with wtf2osc which includes a
python script osc2dmx.enttec.py, which is
able to open my device and via osc i am able
to send.
i belief the problem is that dmx512 tries to open
/dev/dmx but my dmx controller is on
so also
% export DMX=/dev/ttyUSB0
would work ?
erich
-
http://randomseed.org
On Fri, 21 Nov 2008, IOhannes m zmoelnig wrote:
hi
Erich Berger wrote:
to give some more info:
i had success with wtf2osc which includes a
python script osc2dmx.enttec.py, which is
Erich Berger wrote:
so also
% export DMX=/dev/ttyUSB0
if /dev/ttyUSB0 is a dmx device (which i doubt; according to its name it
should be a serial device), then it will work.
maybe it works with the erwin rol drivers.
fgmadr
IOhannes
___
thx iohannes for your help and suggestions !
if /dev/ttyUSB0 is a dmx device (which i doubt; according to its name it
should be a serial device), then it will work.
its a serial device and it did not work as you doubted.
maybe it works with the erwin rol drivers.
no, i tried them, i got
Erich Berger wrote:
no, i tried them, i got the device attached to /dev/dmx0 but even i
exported DMX to /dev/dmx0 and took care of the rights i get nothing
through (also blacklisted all the other modules which might interfere)
when i worked with DMX (only once and not with an enttec) it
when i worked with DMX (only once and not with an enttec) it was crucial
to plug in the device after the system had booted.
else it would just freeze (no matter how i tried to blacklist and/or
remove offending modules)
while it was ugly, it was acceptable as in this special case it was
hello,
i ll try to get the enttec dmx usb pro to work under linux
ubuntu 7.10 and pd.
i followed the instructions of iohannes in dmx512 .
everything compiled fine.
but i am not able to open the enttec.
plugin in and dmesg:
[ 1332.756000] usb 3-1: new full speed USB device using uhci_hcd and