Steve Pearson wrote on 19.12.04 1:54:
Ok, I picked up the 360 flash today. I think I have
it figured out with SMC-A lenses. However, with an
SMC-M lens, it won't fire the 360 in wireless mode.
Is this normal?
Yes, for wireless TTL flash you need a lens with electrical contacts and in
case
Except the fac that you can cheat wit ha bit of modding as Michel
describes pretty well on his website.
You can use matrix mùetering, PTTL atc even with M42 lenses if ya want :D
-
Thibouille
Michel Carrère-Gée wrote:
Steve Pearson a écrit :
Ok, I picked up the 360 flash today. I
What's the website address?
Don
-Original Message-
From: Thibs [mailto:[EMAIL PROTECTED]
Sent: Sunday, December 19, 2004 5:16 AM
To: [EMAIL PROTECTED]
Subject: Re: istD w/ SMC-M lens-wireless 360 flash?
Except the fac that you can cheat wit ha bit of modding as Michel
describes
://www.robertstech.com/matrix.htm
Thibouille
Don Sanderson wrote:
What's the website address?
Don
-Original Message-
From: Thibs [mailto:[EMAIL PROTECTED]
Sent: Sunday, December 19, 2004 5:16 AM
To: [EMAIL PROTECTED]
Subject: Re: istD w/ SMC-M lens-wireless 360 flash?
Except
If you look at the top display on the camera you will see
that when a lens is moved off of the A position wireless
flash mode cannot be selected, same in M mode.
Not sure why or how but wireless mode must be used with
A lenses, perhaps a future firmware upgrade will allow
this, but I rather doubt
Steve Pearson a écrit :
Ok, I picked up the 360 flash today. I think I have
it figured out with SMC-A lenses. However, with an
SMC-M lens, it won't fire the 360 in wireless mode.
Is this normal?
Yes, P-TTL works only with F, FA and A lenses, not with K, M lenses; so,
unfortunately no matrix
6 matches
Mail list logo
