Bump! Amir Seyavash Mesry [EMAIL PROTECTED] LSI Logic Corporation http://www.lsilogic.com/ Raid Support Test Technician 6145-D Northbelt Parkway Norcross, GA 30071 678-728-1211
NOTICE: This communication may contain privileged or other confidential information. If you are not the intended recipient, or believe that you have received this communication in error, please do not print, copy, retransmit, disseminate, or otherwise use the information. Also, please indicate to the sender that you have received this communication in error, and delete the copy you received. Thank you. >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] >On Behalf Of Amir Seyavash Mesry >Sent: Friday, January 24, 2003 3:33 PM >To: 'PF Mailing list' >Subject: Nat Problem or misconfiguraton > > >Ok, I need some help. >Here is my pf conf, stripped down so the nat works, and >ifconfig out put also, can anyone figure out why it won't do >nat on rl1, but will do it one rl0 >Pf.conf: >nat on rl0 inet from 192.168.0.7/32 to any -> rl0 >nat on rl1 inet from 192.168.0.15/32 to any -> rl1 >nat on rl1 inet from 192.168.0.4/32 to any -> rl1 >nat on rl1 inet from 192.168.0.16/28 to any -> rl1 > >pass in all >pass out all > >Ifconfig: >rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > address: 00:50:fc:2a:17:5f > media: Ethernet 100baseTX full-duplex > status: active > inet6 fe80::250:fcff:fe2a:175f%rl0 prefixlen 64 scopeid 0x1 > inet 24.98.84.83 netmask 0xfffffe00 broadcast 255.255.255.255 > >(RL1 is listed with media options 10BaseT and autoselect) >rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > address: 00:c0:26:7e:2c:3d > media: Ethernet 10baseT > status: active > inet6 fe80::2c0:26ff:fe7e:2c3d%rl1 prefixlen 64 scopeid 0x2 > inet 24.98.85.22 netmask 0xfffffe00 broadcast 255.255.255.255 >rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > address: 00:c0:26:7e:2c:3d > media: Ethernet autoselect (none) > status: active > inet6 fe80::2c0:26ff:fe7e:2c3d%rl1 prefixlen 64 scopeid 0x2 > inet 24.98.85.22 netmask 0xfffffe00 broadcast 255.255.255.255 > >rl2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > address: 00:50:fc:3a:32:6d > media: Ethernet 100baseTX full-duplex > status: active > inet 192.168.0.1 netmask 0xffffffe0 broadcast 192.168.0.0 > inet6 fe80::250:fcff:fe3a:326d%rl2 prefixlen 64 scopeid 0x3 > > >If rl0 & rl1 get dhcp assigned ips which are show, but rl1 >won't nat, anyone got any ideas as to why the nat on rl0 works >and not on rl1 > > >Amir Seyavash Mesry >[EMAIL PROTECTED] >LSI Logic Corporation >http://www.lsilogic.com/ >Raid Support Test Technician >6145-D Northbelt Parkway >Norcross, GA 30071 >678-728-1211 > >NOTICE: This communication may contain privileged or other >confidential information. If you are not the intended >recipient, or believe that you have received this >communication in error, please do not print, copy, retransmit, >disseminate, or otherwise use the information. Also, please >indicate to the sender that you have received this >communication in error, and delete the copy you received. Thank you. > > >
