On 09/14/2011 08:52 PM, Ken Stephens wrote:
> Use the dmidecode command to display your hardware. Look for Memory
> Module Information. It will display the supported speeds.
Thanks, Ken. It shows the supported speeds, but not the installed
speeds. I'll open the box in the morning and have a look
Dale Snell wrote:
> On Tue, 13 Sep 2011 11:41:23 -0700
> "Richard C. Steffens" wrote:
>
>
>> I used "sudo dmidecode --type memory" to try to learn the speed
>> of my currently installed memory. (I'm thinking of adding
>> some.) I find that I have two 512 MB modules installed out of a
>> possib
On Tue, Sep 13, 2011 at 7:51 PM, Neal wrote:
> >> As far as price, it doesn't matter wether you buy PC3200 or PC2700
> non-ECC memory. It's the same price.
>
> Be aware that the PC2700 can be faster than the PC3200. If you're
> running at PC2700 speed and the PC2700 is CL2.5 while the PC3200 is
>
>> As far as price, it doesn't matter wether you buy PC3200 or PC2700 non-ECC
>> memory. It's the same price.
Be aware that the PC2700 can be faster than the PC3200. If you're
running at PC2700 speed and the PC2700 is CL2.5 while the PC3200 is
CL3, there will be a performance hit with the PC3200.
On 09/13/2011 02:17 PM, Russell Johnson wrote:
> On Sep 13, 2011, at 1:30 PM, Richard C. Steffens wrote:
>
>> MSI MS-6380E
> According to crucial.com your motherboard supports:
>
> Memory Type: DDR PC3200, DDR PC2700, DDR (ECC)
> Maximum Memory: 3GB
> Slots: 3
> Each memory slot can hold DDR PC3200
On Sep 13, 2011, at 1:30 PM, Richard C. Steffens wrote:
> MSI MS-6380E
According to crucial.com your motherboard supports:
Memory Type: DDR PC3200, DDR PC2700, DDR (ECC)
Maximum Memory: 3GB
Slots: 3
Each memory slot can hold DDR PC3200, DDR PC2700 with a maximum of 1GB per slot.
As far as pri
On 09/13/2011 11:58 AM, Marvin Kosmal wrote:
> On Tue, Sep 13, 2011 at 11:41 AM, Richard C.
> Steffenswrote:
> I am thinking finding out the Mother Board type is important to answer these
> questions.
I ran lshw yesterday while looking for what kind of memory I have, so I
already have the mother
On 09/13/2011 11:41 AM, Richard C. Steffens wrote:
>
> dmidecode says "Current Speed: Unknown" for both of those.
When I run dmidecode I get speeds for my modules, showing as DMI type 17
(also as type 6, showing current speed in ns). Just a guess, perhaps the
sticks or the MB don't support spee
On Sep 13, 2011, at 11:41 AM, Richard C. Steffens wrote:
> Is there some other way -- short of taking the cover off the box -- to
> find out what speed the chips are?
How about getting the model number, if available, and checking with the
manufacture.
Russell Johnson
r...@dimstar.net
_
On Tue, 13 Sep 2011 11:41:23 -0700
"Richard C. Steffens" wrote:
> I used "sudo dmidecode --type memory" to try to learn the speed
> of my currently installed memory. (I'm thinking of adding
> some.) I find that I have two 512 MB modules installed out of a
> possible 3 modules.
>
> dmidecode says
On Tue, Sep 13, 2011 at 11:41 AM, Richard C. Steffens wrote:
> I used "sudo dmidecode --type memory" to try to learn the speed of my
> currently installed memory. (I'm thinking of adding some.) I find that I
> have two 512 MB modules installed out of a possible 3 modules.
>
> dmidecode says "Curre
I used "sudo dmidecode --type memory" to try to learn the speed of my
currently installed memory. (I'm thinking of adding some.) I find that I
have two 512 MB modules installed out of a possible 3 modules.
dmidecode says "Current Speed: Unknown" for both of those.
Is there some other way -- sho
12 matches
Mail list logo
