A quick google on
keyboard F-21YQ Fujitsu keyboard
Turned up a couple of small images
--
Timothy J. Bruce
visit my Website at: http://www.tbruce.com
Registered Linux User #325725
On Mon, October 27, 2014 14:44, Denis Heidtmann wrote:
> On the back it says SOFT F-21YQ (SPK-2000). It has a
On the back it says SOFT F-21YQ (SPK-2000). It has a "Fujitsu
computers Siemens" label on the front. I cannot find a good picture to
show the key layout.
Searching for that name (SOFT...) I get some hits for BIOSTAR stuff.
It may be a designation for an entire system.
-Denis
On Mon, Oct 27, 20
What make/model keyboard is it? I'd be interested to see an image of it
Online.
On Oct 27, 2014 1:08 PM, "Denis Heidtmann"
wrote:
> On Mon, Oct 27, 2014 at 11:42 AM, Dale Snell wrote:
> > On Mon, 27 Oct 2014 10:31:48 -0700
> > Denis Heidtmann wrote:
> >
> >> showkey -a
> >> for the left key of
On Mon, 27 Oct 2014, Denis Heidtmann wrote:
> But I still have the question: Where do I put these commands so that they
> get executed whenever I start up?
Denis,
~/.Xmodmap
Then, in ~/.xinitrc (or the equivalent for your distribution) put the
line,
/usr/bin/xmodmap ~/.Xmodmap
or put in
On Mon, Oct 27, 2014 at 11:42 AM, Dale Snell wrote:
> On Mon, 27 Oct 2014 10:31:48 -0700
> Denis Heidtmann wrote:
>
>> showkey -a
>> for the left key of interest:
>> < 60 0074 0x3c
>> for the right key of interest:
>> \ 92 0134 0x5c
>
> This is showing the ASCII values for the characters in
On Mon, Oct 27, 2014 at 10:09 AM, Dale Snell wrote:
> On Mon, 27 Oct 2014 08:31:13 -0700 (PDT)
> Rich Shepard wrote:
>
>> On Mon, 27 Oct 2014, Ken Stephens wrote:
>>
>> > showkey
>>
>> Ken,
>>
>>Wasn't sure if that showed the key name as used in .Xmodmap or the
>> scan code for the key. Didn'
On Mon, 27 Oct 2014 10:31:48 -0700
Denis Heidtmann wrote:
> showkey -a
> for the left key of interest:
> < 60 0074 0x3c
> for the right key of interest:
> \ 92 0134 0x5c
This is showing the ASCII values for the characters in decimal,
octal, and hexadecimal. "<" is 60 (dec), \074 (oct), and
showkey -a
for the left key of interest:
< 60 0074 0x3c
for the right key of interest:
\ 92 0134 0x5c
There is also xev:
For the left key:
KeyPress event, serial 36, synthetic NO, window 0x4c1,
root 0x261, subw 0x0, time 2468220, (18,-5), root:(1517,42),
state 0x10, keycode 94 (k
On Mon, 27 Oct 2014, Dale Snell wrote:
> Use xev(1) to get the key names that X uses. They aren't the same as the
> ones the VTs use. Also for X, see xmodmap(1) and setxkbmap(1).
Dale,
xev: that's the tool I did not remember.
Thanks,
Rich
___
PLUG
On Mon, 27 Oct 2014 08:31:13 -0700 (PDT)
Rich Shepard wrote:
> On Mon, 27 Oct 2014, Ken Stephens wrote:
>
> > showkey
>
> Ken,
>
>Wasn't sure if that showed the key name as used in .Xmodmap or the
> scan code for the key. Didn't look at the man page.
showkey(1) [and its cousins loadkeys(1
On Mon, 27 Oct 2014, Ken Stephens wrote:
> showkey
Ken,
Wasn't sure if that showed the key name as used in .Xmodmap or the scan
code for the key. Didn't look at the man page.
Rich
___
PLUG mailing list
PLUG@lists.pdxlinux.org
http://lists.pdxlinux.
Rich Shepard wrote:
> On Sun, 26 Oct 2014, Denis Heidtmann wrote:
>
>> My keyboard gave up so I replaced it with one from FreeGeek. I discovered
>> this new keyboard has a couple of extra keys next to the shift keys,
>> making the shift keys smaller. How can I change the behavior of those keys
>>
On Sun, 26 Oct 2014, Denis Heidtmann wrote:
> My keyboard gave up so I replaced it with one from FreeGeek. I discovered
> this new keyboard has a couple of extra keys next to the shift keys,
> making the shift keys smaller. How can I change the behavior of those keys
> to shift? I have looked at
My keyboard gave up so I replaced it with one from FreeGeek. I
discovered this new keyboard has a couple of extra keys next to the
shift keys, making the shift keys smaller. How can I change the
behavior of those keys to shift? I have looked at various man pages
and done some Googling, but I have
14 matches
Mail list logo