My return experience was abysmal. Tech support told me to take it to
the store. The store refused it and said call tech support. 45 minutes
on the phone (again), I got a return label and they told me to take it
to the store. Yeah, no - I took it to UPS .
Regards,
George Toft
On 4/8/2022
is that a sub-interface then?
On Wednesday, April 20, 2022, 10:04:51 AM MST, Keith Smith via PLUG-discuss
wrote:
WOW Thanks!! If we were running a box of VPS's and the box had two NICs
would the second NIC be redundant just in case the 1st NIC fails How
do multiple NICs on the
When I worked as a server admin at GoDaddy.com ... we would create a second
virtual NIC (eth0:1) and configure that with a dedicated IP address that
was in the ARIN block they owned. The switches further up the stream would
handle the NATing and whatnot to make sure that server got the proper
WOW Thanks!! If we were running a box of VPS's and the box had two NICs
would the second NIC be redundant just in case the 1st NIC fails How
do multiple NICs on the same box work?
OK so the software layer on the O/S talks to the NIC but is not actually
assigned to any particular NIC?
well, I searched the man page for 'resolution', '720' & '480' but to my
uneducated view there was nothing appropriate.
On Sun, Apr 17, 2022 at 3:00 AM Eric Oyen via PLUG-discuss <
plug-discuss@lists.phxlinux.org> wrote:
> I will have to take a close look at the ffmpeg man page. I am sure there
>
aren't the ports associated with the IP?
On 2022-04-20 08:57, Bob Elzer via PLUG-discuss wrote:
I know you can assign multiple IP's to one Nic, but I don't know how
each VPS can run a service on the same ports.
On Wed, Apr 20, 2022 at 8:51 AM Keith Smith via PLUG-discuss
wrote:
Hi,
I'm
Always remember, the network interface from the OS side and the network
interface from the hardware side are two completely different concepts. Other
than the fact that they are generally matched one to one, they really have
nothing to do with one another.
A hardware interface (i.e. on a NIC)
Teaming makes multiple Nic's look like one and increases the bandwidth.
this ifcfg script will assign to ip's to one nic 192.168.1.8 and 10.1.1.8
TYPE=Ethernet
DEVICE=enp6s0
ONBOOT=yes
IPADDR=192.168.1.8
NETMASK=255.255.255.0
GATEWAY=192.168.1.1
DNS1=192.168.1.1
PREFIX=24
DEFROUTE=yes
yesNIC teaming?
On Wednesday, April 20, 2022, 08:58:00 AM MST, Bob Elzer via PLUG-discuss
wrote:
I know you can assign multiple IP's to one Nic, but I don't know how each VPS
can run a service on the same ports.
On Wed, Apr 20, 2022 at 8:51 AM Keith Smith via PLUG-discuss
wrote:
I know you can assign multiple IP's to one Nic, but I don't know how each
VPS can run a service on the same ports.
On Wed, Apr 20, 2022 at 8:51 AM Keith Smith via PLUG-discuss <
plug-discuss@lists.phxlinux.org> wrote:
>
> Hi,
> I'm wondering how VPS servers are configured. I have a VPS with a
>
Hi,
I'm wondering how VPS servers are configured. I have a VPS with a
dedicated IP. I assume I share a box that has a number of virtual
machines and I assume each VPS has a dedicated IP.
This is a hardware question. I assume the box has at least 2 network
cards. So lets say the server
Have you tried Xournal? You can open PDF documents, type on them, draw on
them,etc and then save them back to PDF.
JD
On Tue, Apr 19, 2022 at 7:22 PM joe--- via PLUG-discuss <
plug-discuss@lists.phxlinux.org> wrote:
> Today, I tried to use Libre Office to fill in
> a pdf document form and I
12 matches
Mail list logo
