philippe_44 wrote:
> So I think I've found the answer and that will have to apply to all my
> plugins that use my mdns broadcast and this will be complicated,
> probably. The idea is that in mdns, the response to a requestor is
> normally through a broadcast, but the requestor can set a flag to
Nautilus wrote:
> It seems IGMP setting has something to do with this. The player becomes
> usually connected if my iPhone is on the same access point, then
> disconnects soon after. I enabled IGMP snooping on my router and it
> helped for a while (player was connected for a few d
Hi, this has worked well and been stable for a long time. I needed to
updated on of my Raspberries to Buster and while I as at it, I updated
the squeezelite to latest version
(https://sourceforge.net/projects/lmsclients/files/squeezelite/linux/squeezelite-1.9.7.1256-armv6hf.tar.gz)
as well and wh
mherger wrote:
> > mherger wrote:
> >>> but when I go and have a look, the file is definitely there:
> >>
> >> But can you run it? What if you disabled transcoding to flac
> >
> > Just tested this before I saw your message and indeed it works again
> > after I disabled flac transcoding for Spott
mherger wrote:
> > but when I go and have a look, the file is definitely there:
>
> But can you run it? What if you disabled transcoding to flac
>
Just tested this before I saw your message and indeed it works again
after I disabled flac transcoding for Spotty. I'm not sure how I would
be sup
Sorry if this has been asked before, but the only references to similar
issues I was able find were pointing to very old versions or they seemed
somewhat different to what I am experiencing. The background is that
I've been successfully running Spotty on LMS 7.9.1 installed on Qnap
TS-259 Pro II (
Nautilus wrote:
> Thanks! I'll look into those for sure. I think I did most of the steps
> already (as was explained on some post in this thread), but there were
> still some errors, with this list you provided I'm positive I can
> advance further :)
>
Yes! I can conf
Nautilus wrote:
> Ok, thanks, I think I need to let this one go...:) I have a Ts-259 Pro+
> and it does not support the container station so out of luck with that
> as well ;)
>
> Edit: Just saw your following posts. So there is hope after all :D Can
> you share some
Nautilus wrote:
> Ok, thanks, I think I need to let this one go...:) I have a Ts-259 Pro+
> and it does not support the container station so out of luck with that
> as well ;)
>
> Edit: Just saw your following posts. So there is hope after all :D Can
> you share some
scala wrote:
> Hi, I just saw your message. I never managed to get it work, and finally
> I gave it up completely.
> In fact, I'm considering re-installing LMS in a completely different way
> using Container Station, where it seems that there are some pre-defined
> containers with all prerequisit
scala wrote:
> Dear Philippe,
>
> I think I will need your kind help for successfully running the plugin
> on a QNAP HS-251 running 4.2.0, and LMS 7.9.0 nightly (I still have to
> move to the official 7.9.0).
> I have successfully installed Crypt::OpenSSL::Bignum,
> Crypt::OpenSSL::Random, Crypt
pippin wrote:
> So registering on MySB helped?
>
> Good, I'll check what was going on there before. So it seems, I'll let you
> know if I still face issues...:)
Nautilus's Profile: http://forums.slimdevices.com/member.ph
pippin wrote:
> It depends on whether you have a player connected to MySqueezebox.com.
> If you have a player on MySqueezebox.com and your other server is no
> longer reachable, iPeng will switch to MySB.
> But only if the main App is running in the foreground.
> Otherwise it should not. Understo
1. Yes I'm sure I do not switch it in main app. This happens basically
every time when I'm out of my home network and I never click the
"MySqueezebox.com" which shows under other music sources - I assume
there is no other way to change it in the main app? I haven't given a
password to it and so th
pippin wrote:
> Do you keep iPeng running in the background?Yes, iPhone apps to my
> understanding pretty much always run in the
background unless you take specific measures to kill it (which hopefully
is not needed in this case :)).
pippin wrote:
> Because iPeng usually isn't supposed to swit
Hi,
I don't use MySqueezebox.com and have not done any configurations
related to it what so ever. But every time I get out of my local
network, iPeng widget selects MySqueezebox.com as the current music
source and keeps it until I open the app and go change it. This makes
the widget usage a bit p
I haven't experimented with
> ip-to-ir yet, so I don't know if it's possible.
>
> Mikkel
Ok, I'll have to look into it - almost zero experience with HTML let
alone Java :) So, you think that (frames or java) migh
s the back button on the browser after executing a command
but it would give it a more sleek look & feel if it did not go the
default page at all. So essentially what I'm looking for is some way to
execute a href target sort of without going to that ta
nnish ;)
In any case, can't wait for this version to come out - keep up the good
work i_e...:)
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com/member.p
+1 SqueezeIR
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com/member.php?userid=19856
View this thread: http://forums.slimdevices.com/showthread.php?t=
ver wi-fi...
Hi again! As you may have guessed, I for one would be very interested
in this functionality :)
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com/member.php?userid=19856
View this thread: http://f
attached (just
> paste them into the 'begin codes...end codes' section of the lirc file.
Nautilus;555837 Wrote:
> Thank you very much :) I shall be trying this out asap...
Hi again. The range of codes was certainly correct, there were numerous
codes that worked which were not on t
attached (just
> paste them into the 'begin codes...end codes' section of the lirc file.
Thank you very much :) I shall be trying this out asap...
--
Nautilus
Nautilus's Profile: http://forums
t/remotes/sony/RM-AAU014
Naturally I don't except you to hurry with this, there are certainly
other priorities in your life..:) But if you would be able to work out
the codes following the logic with these ones I'd be very happy to test
them out. Thanks a lot, you are way too kind
, does anyone here know anybody who might be up to (and
interested in) the task of creating a server side plugin based on
SqueezeIR...? ;)
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com/member.php?userid=19856
Vi
I restart the application a couple of
times it would eventually find the players. However, on the mentioned
occasion even several restarting did not help, only after turning off
the whole device it found then again. We'll, it hasn't happened too
often luckily
--
Nautilu
ur setup, it
sounds very cool and is something I'd like to be achieve too..:)
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com/member.php?userid=19856
View this thread: http://forums.slimdevic
my receiver is originally for a simpler device so it's missing
some commands. So I was wondering if it is possbile (well, certainly
possible but possible with reasonable effort) to try to find the
missing codes by trial and error, following the sequnce of the existing
comman
have static ip addresses in my LAN.
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com/member.php?userid=19856
View this thread: http://forums.slimdevices.com/showthread.php?t=51929
ezeIR. It's perfectly understandable that this would not be an easy
thing to achieve - but I'll keep my eyes open if I come across (as pearl
is not my game either :) ) anything that might be useful in this
context...
--
Nautilus
-
..:) Unless there's something applicaple already made for some
other purpose?
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com/member.php?userid=19856
View this thread: ht
g. control the amps volume from patio in the garden with
iPod :)
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com/member.php?userid=19856
View this thread: http://forums.slimdevices.com/showthread.php?t=6
Nautilus;552797 Wrote:
> Great news, thanks a bunch (in advance)! I'll start going through the
> Sony codes once you release the new version, it'll make the testing lot
> easier (I hope) than to convert first to pronto...:)
Great new again (for me), made a bit of a progre
Might make life a bit easier for you.
Great news, thanks a bunch (in advance)! I'll start going through the
Sony codes once you release the new version, it'll make the testing lot
easier (I hope) than to convert first to
ony/Sony_pronto.htm). Might try that one
although it would be pretty much the same as going through lirc files
as I'm not sure which device code to use...
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com
ound out there were couple of other chaps looking for the same
codes :)
--
Nautilus
Nautilus's Profile: http://forums.slimdevices.com/member.php?userid=19856
View this thread: http://forums.slim
36 matches
Mail list logo