Hi Jaap
I have switched off the firewall and have entered the correct IP and
changed the port to 9000
Why this? It is port 9090. Nothing to change here.
Although I do not really know what I am doing I tried telnet
192.168.1.35 9090 and am told I cannot connect. If I try the same with
9000
Hi Michael,
thanks for your reply. I changed to 9000 as this was the webserver port
number under server settings. I assume this has nothing to do with cli?
Under Plugins cli is active.
Also not sure how and where I should telnet from the server itself. As
it is a headless server I can Remote
thanks for your reply. I changed to 9000 as this was the webserver port
number under server settings. I assume this has nothing to do with cli?
Yes, web and CLI are distinct services, running on different ports.
Also not sure how and where I should telnet from the server itself. As
it is a
Michael,
I got the black screen as you mentioned . when I type players count, i
cannot see the type; it remains black, but i do get the following
response. (also on the actual server 192.168.1.35 9090.
Players Count counts%3A1
back to you (if you havent given up yet)
Thanks!!
Jaap
--
Jaap_98
Players Count counts%3A1
...which means you have one player connected. If you have a second machine, can
you do the same test from there? If it doesn't work, then it's very likely the
firewall which is blocking port 9090. If you have something like McAfee or
Symantec, just make sure you open
Michael,
My (headless) server is actually running Windows Home server (server
2003 based). Here the telnet was successful.
I also tried from my laptop (wifi) without success and from another
desktop (wired LAN) also no go.
I use no software firewall other than what is part of windows resp WHS.
Michael thanks, problm solved.
Added port 9090 to the exceptions list on WHS. now Your program works.
Actually it rocks!! Looks great.Thanks for all the assistance.
kind regards
Jaap
--
Jaap_98
Jaap_98's Profile:
Hi Michael,
I am also having a problem with the install.
I have switched off the firewall and have entered the correct IP and
changed the port to 9000 (as is entered on the serversetting s page. I
get the interface, but nothing else.On the Status page I see a big
Question mark, and when I press
As you can probably tell I'm not a computer expert, when you say check
that the port is open do you mean in Norton Firewall (which I have set)
Yes, that's what I meant. I don't know Norton, but make sure it allows in and
outgoing connections. Not sure whether you have to check the Windows
Dear Michael
I can't believe it, it works at last!
All the buttons respond, it shows cover artwork,
playlists,searchs..everything I so impressed.
Thank you for all of your help for putting up with all my dumb
questions!
I still think it would be worth writing a short guide as to how to fill
I can't believe it, it works at last!
What was the last change needed?
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/plugins
I rechecked the slimremote and noticed port was set at 9000 so changed
that to 9090.
Also rechecked Norton Firewall settings just to make sure ports were
correctly assigned.
Don't know which did the trick, but it works fine now so thanks once
again for all of your assitance.
--
Moko
To put it bluntly it does nothing!
No stop/play, No Playlists, No Search
But does it at least offer to do so? Does it display the currently song? Do you
_see_ anything? Songs? Albums? Settings tab?
Michael
___
plugins mailing list
No current song, no playlists, no functions
It would be my guess all though it says it has connected it hasn't
because apart from being able to push the various buttons nothing
happens.
--
Moko
Moko's Profile:
It would be my guess all though it says it has connected it hasn't
because apart from being able to push the various buttons nothing
happens.
Ok, it does display the interface. That's what I wanted to know from the
beginning. Was pretty hard to get you say that ;-).
Now please turn on d_cli
Checked on slimserver setting pages that CLI is ticked it is.
Do you mean something else by D_CLI that you wrote in your last reply?
Looking on Slimserver settings all the plugin boxes seem to be ticked
so hopefully it should be ok.
The interface still does not respond to any button pushes
Do you mean something else by D_CLI that you wrote in your last reply?
Go to Server Settings/Debugging - there you'll find a list of debugging
options, one of which is d_cli. There's a link to the log file, too. You should
see all commands which are sent to the server through the CLI (command
Also noticed if I leave slimremote running it eventually comes up with
not connected message, so I guess the answer lies somewhere with how it
is failing to connect
--
Moko
Moko's Profile:
Also noticed if I leave slimremote running it eventually comes up with
not connected message, so I guess the answer lies somewhere with how it
is failing to connect
That's a rather important piece of information... so it fails.
Going back a few postings: when you did the telnet test, did you
From other laptop when I enter telnet yourserver it comes up with black
screen and says conecting to your server and then disappears before I
can type anything else.
Anyway around this?
--
Moko
Moko's Profile:
As you can probably tell I'm not a computer expert, when you say check
that the port is open do you mean in Norton Firewall (which I have set)
or do you mean on the Netgear Router (which I haven't a clue about
setting ports on)?
--
Moko
Been busy for a few days, but looked up the info you required
Slimserver 192.168.0.2 (on XP laptop)
Phone 192.168.0.3 (checked and is connected to network)
Squeezebox 192.168.0.5
All connected through Netgear DG834G
I changed the IP address in settings from 192.168.03 to 192.168.0.2 and
it
it seems to now get pst the 12% stage and says things like loading
playlists etc. But when the program opens it still won't act as a
remote.
What does it do then? Please don't expect the 0-9 buttons :-)
Michael
___
plugins mailing list
To put it bluntly it does nothing!
No stop/play, No Playlists, No Search
So all in all it does nothing that you would hope a remote control
would do!
What should I do next?
--
Moko
Moko's Profile:
Well I checked the ports on the Norton Firewall, and I had made a
mistake so corrected that.
Tried the Telenet thing which pulled up a black screen said something
like connecting to yourserver and then went blank.
In regards to password etc. Are there standard settings for this
because I don't
Tried the Telenet thing which pulled up a black screen said something
like connecting to yourserver and then went blank.
That's ok then.
In regards to password etc. Are there standard settings for this
because I don't rememember setting any username/password when I set up
Slimserver?
If
Hi Moko
When I launch the program get the boxes to fill in ie. 168.0.0.3
CCL 9090 etc. But when I try to connect it gets to 12% and then stops.
That's most probably a connection issue. Please check
- the CLI plugin on SlimServer is running
- port 9000, 9090, 3483 udp/tcp are opened on your
Sorry if this has been asked before but after searching can't find any
info on how to set up this program. I have checked Michael's hompage
nothing apart from how to install the program (nothing on getting it
connected running)
I have a squeezebox 3 connected wirelessly to a laptop XP which
I have CLI enabled, I have setup Norton Firewall to allow 9000 9090 and
the 3838 ports(I think from memory).
How do I do a telenet? I have another wireless laptop I could use but
have no idea what this is or how to do it?
Are you the Michael who wrote the program? If so would it not be a good
I have CLI enabled, I have setup Norton Firewall to allow 9000 9090 and
the 3838 ports(I think from memory).
Make sure it's 3483 tcp udp
How do I do a telenet? I have another wireless laptop I could use but
have no idea what this is or how to do it?
It's the exact command I posted ;-)
30 matches
Mail list logo
