From: KG [EMAIL PROTECTED]
A MainStreet is no faster than a PB3400c/240
My mistake, it's a Series II as it has 14 TFT...
Laurence
_
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://www.mcpb.com/html/pbhdi2.html shows the adapters and cables which attach
via a standard SCSI cable to the other devices. (available in 25 and 50 pin
versionsThe termination at the MB end is handled by the MB, so only the last
device on the chain requires termination. If you want to also
From: Melvin Watts [EMAIL PROTECTED]
I've got a powerbook 1400 c s with a new just installed 466 MHZ upgrade by
sonnet. . . .if 8 GIG Hard Drive, 32 MB Ram [can piggyback 32 more cheap]
if you're interested email me with an offer.
The price for such a beast ?
Could someone please answer some more powerbook 3400 questions:
1. I see from the Service Manual that the in the Environmental
section on page 43, it says the shipping, non- operating altitude is
15,000 feet maximum and I wanted to send it by Fed Ex from Australia
to America. Does this mean
From: Mark Koan [EMAIL PROTECTED]
What is the max I can get with video on a 540c, and
what hardware is needed? And how much would it cost
generally? I only get 256 colors on the screen right
now.
As it says on lowendmac.com:
display: 9.5 8-bit 640x480 color active matrix
paid $295.00 for the upgrade, the HD cost $40.00[came with a 540 MB],
128 MB flash memory card $59.00, and we all know what 1400's are going
for. . .well, for this kind of money you can get a decent wallstreet,
lombard, or even a G4! So It would not make sense for me to ask for
what I paid
might want to try static IPs, not elegant but works for my 5 wired home
networked MACs running 8.6( three 3400's and two G3s)
i set up my linksys box to start assigning DHCP addresses at IP 100, so i
have addresses under 100 to assign statically
not elegant, simple, works for me
jim
on
Kal,
I don't know about #1, but for #2, most double sided tape softens with
heat and the tape on mine is single sided and on the thick side. For # 3 I
used a piece of a 8.5 X 11 transparency to avoid the heat issue and the
material matched that used in another 3400.
Roger
kaldav wrote:
Thanks to everyone for all the suggestions for my sickly Zip Cartridge. The winning
magic was using Disk Warrior 2.0. It churned for a while and complained about
everything on the disk being wrong, and then reported: Rebuilding Directory Structure,
Repairing Volume Info, Repairing Critical
Try baucomcomputers.com he had some G3 upgrades for the 1400
Gary
On Wednesday, October 29, 2003, at 01:10 AM, KG wrote:
If I have to upgrade it to G3 then I may as well buy a G3
PowerBook. I have just been offered two 233MHz 14.1
Wallstreets (Mainstreets) for $150 each...
How much is a G3
On Tuesday, October 28, 2003, at 01:04 PM, Mark Koan wrote:
What is the max I can get with video on a 540c, and
what hardware is needed? And how much would it cost
generally? I only get 256 colors on the screen right
now.
You can get 16 bit on the 540c, by dropping the screen to 640 x 400
mode,
I may try that. The last time I did I used the same number that the DHCP would have
assigned and it didn't work.
-tom
--
From: jim page
Subject: Re: IP problem on PowerBook 3400 - static IPs
might want to try static IPs, not elegant but works for my 5 wired home
As it says on lowendmac.com:
display: 9.5 8-bit 640x480 color active matrix
The 550c had 800 x 600.
The others were limted to 640 x 480 at 8 bit, or 640 x 400 at 16 bit.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To
Is anyone on the list who's proficient at rebuilding 500 series batteries
interested in tackling this for other folk, for a fee? I've got maybe 3
batteries I'd like to get into working order but I have all thumbs when it
comes to doing this sort of work. I've asked offlist, but I'm not sure if
on 10/29/03 6:44 PM, Howard R. Katz at [EMAIL PROTECTED] wrote:
Is anyone on the list who's proficient at rebuilding 500 series batteries
interested in tackling this for other folk, for a fee? I've got maybe 3
batteries I'd like to get into working order but I have all thumbs when it
comes
As it says on lowendmac.com:
display: 9.5 8-bit 640x480 color active matrix
The 550c had 800 x 600.
The others were limted to 640 x 480 at 8 bit, or 640 x 400 at 16 bit.
Hi not all of them did the 550c I owned only had 640x480 at 256 but with a
10.4 screen. Basically the same as the
On Wednesday, October 29, 2003, at 08:34 AM, [EMAIL PROTECTED] wrote:
As it says on lowendmac.com:
display: 9.5 8-bit 640x480 color active matrix
The 550c had 800 x 600.
Oh, yeah, All 4 of them ;-) Ever *see* the price of these puppies on
E-bay?
Heck you can practically buy Wallstreets for
The 550c had 800 x 600.
Oh, yeah, All 4 of them ;-) Ever *see* the price of these puppies on
E-bay?
Heck you can practically buy Wallstreets for the price. Certainly
3400's and PBG3's...
Perhaps, but someone picked up a 550c for under a hundred. Victoria, I
think.
--
PowerBooks is
At 11:36 PM +1100 10/29/03, kaldav wrote:
Could someone please answer some more powerbook 3400 questions:
1. I see from the Service Manual that the in the Environmental
section on page 43, it says the shipping, non- operating altitude
is 15,000 feet maximum and I wanted to send it by Fed Ex
on 29/10/03 18:26, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote:
The 550c had 800 x 600.
Oh, yeah, All 4 of them ;-) Ever *see* the price of these puppies on
E-bay?
Heck you can practically buy Wallstreets for the price. Certainly
3400's and PBG3's...
Perhaps, but someone picked up
Perhaps, but someone picked up a 550c for under a hundred. Victoria, I
think.
No not me I paid a lot more Paid nearly that for just the shipping.
Vicki
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
--
I am trying to update the OS on my 5300cs from 8.0 to 8.6 and am running
into a problem
I have to do it on floppies as I cannot make the external cd I have work
with it and can't get it to recognize files correctly in order to do it. I
am having to download the files to the Windows XP PC that I
Hi
With the video /ethernet card.
There should be a dongle that attaches to the rear next to the scsi port if
the connector fits into the book then chances are it is just a monitor
connector.
But if the connector sits out and clips on with hooks at either end chances
are you just need to find
Also check your apple talk folder, if you have ethernet as
one of the choices that¹s another way to tell as the 5300 has
no built in ethernet. so for it to be a choice the drivers
must have been loaded and the hardware there for it to see.
Vicki
I have the options of:
.
If I can find an HDI-30 to DB25, do I then need a DB25 passthrough
terminator going into my zip to terminate the front end of the chain
and then use the zip's own termination power to do the final
termination?
I would hope that the zip's termination would do the
trick, as
A MainStreet is no faster than a PB3400c/240
My mistake, it's a Series II as it has 14 TFT...
Well, that blows any 3400 into the weeds. If someone is offering you one of
those for $150 and you can afford it, by all means grab it. I paid $230 for
a pimped-out 3400/240 this summer, and a
Wow,
I had a similar problem a couple weeks ago. The only way I could get
the system on my
greyscale 5300 was to use the external cd hooked up via scsi cable.
What's the beef with your cd?
I don't think you're going to get there with pc floppies.
see ya,
jim o
On Wednesday, October 29, 2003, at
In a message dated 10/29/03 4:32:24 PM, [EMAIL PROTECTED] writes:
Well, that blows any 3400 into the weeds. If someone is offering you one of
those for $150 and you can afford it, by all means grab it. I paid $230 for
a pimped-out 3400/240 this summer, and a properly cached WallStreet 233
is
Wow,
I had a similar problem a couple weeks ago. The only way I could get
the system on my
greyscale 5300 was to use the external cd hooked up via scsi
cable. What's the beef with your cd? I don't think you're
going to get there with pc floppies. see ya, jim o
I just can't get
OK,
let's back up a bit to make sure we're not missing a point here.
You've got the 5300cs with no system right now?
or do you have system 8 on there still?
When you try to boot from the CD you get what?
does the drive spin-up?
You are holding down the c key to boot from the CD?
You have
Greetings. I am new to the list, as I just purchased a PowerBook 180
(grayscale, 14MB RAM/120MB hard drive) for general mobile word
processing and using Bible search software (Accordance). It came with
System 7.6.1 preinstalled (no disks). However, I wanted to slim this
down with an earlier
OK,
let's back up a bit to make sure we're not missing a point here.
Good idea
You've got the 5300cs with no system right now?
or do you have system 8 on there still?
It is currently running System 8
When you try to boot from the CD you get what?
does the drive spin-up?
The only
Normally when it says alternet ethernet it is a pcmcia card
What does the connector on the back of the mac look like if
it is a hole then I do not think the combo card is fitted if
it is a clip then possible as that is what mine looks like.
Can you mail me a pic of the connector off
I just bought some zip 100s. I just read about this click of death.
What is it? Is there prevention? Is it a common problem?
--
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras
On Wednesday, October 29, 2003, at 11:43 AM, PowerBooks wrote:
From: Tekno Liber [EMAIL PROTECTED]
Subject: Re: million of colors on a 540c?
Date: Wed, 29 Oct 2003 14:05:01 +0100
Message-ID: [EMAIL PROTECTED]
From: Mark Koan [EMAIL PROTECTED]
What is the max I can get with video on a 540c, and
Last time I mentioned something about my 5300cs someone had talked about
having painted there's white. I'm interested in what this involves and how
it would look. Can someone send me pictures off list?
The address is [EMAIL PROTECTED]
--
PowerBooks is sponsored by http://lowendmac.com/
My 1400/G3/9.1 has been working with the Wavelan drivers for ages;
recently I took the card out and ran it for a couple days without the card;
not, when I try and connect via the card, my network/TCP/IP is messed up.
TCP/IP shows I have an IP address established in the 169.x range, not
Greetings. I'm trying to run down System 7.1 for my PB180 (currently
with 7.6.1 installed), but I want to try the free 7.5.3 7.5.5 option
first. I've downloaded all 19 disk images of 7.5.3 and the Net
Install.sea version of 7.5.5 onto my eMac's hard drive from Apple. I
was going to burn these
38 matches
Mail list logo
