Hello listers,
I recently acquired a Newertech ethernet card that plugs into the expansion
port (near the RAM slots) inside the Powerbook 1400s.
Only thing is, I cannot seem to get it to work; does it require any software?
Thanks,
Craig W.
--
PowerBooks is sponsored by http://lowendmac.com/
Would suggest so. I acquired a PowerBook 1400cs and an Ossietech Jack
of Diamonds Trumpcard 28.8 card modem thanks to the kindness of a
lister.
Came with a floppy with software on it, and the website also had a
downloadable version which was identical.
You need the software as you have to
In a message dated 1/12/04 4:03:05 AM, [EMAIL PROTECTED] writes:
You need the software as you have to get the modem card icon on the
desktop and set it up to recognise the upper slot.
Suggest www.newertech.com/. They do have a driver section on their
home page.
Well actually, this ethernet
On Jan 11, 2004, at 11:19 PM, [EMAIL PROTECTED] wrote:
In a message dated 1/12/04 4:03:05 AM, [EMAIL PROTECTED] writes:
You need the software as you have to get the modem card icon on the
desktop and set it up to recognise the upper slot.
Suggest www.newertech.com/. They do have a driver
Like Peter said, you need to get the Ethertech Installer software at OWC
JK
[EMAIL PROTECTED] 01/11/04 20:54 PM
On Jan 11, 2004, at 11:19 PM, [EMAIL PROTECTED] wrote:
In a message dated 1/12/04 4:03:05 AM, [EMAIL PROTECTED] writes:
You need the software as you have to get the modem card