***
Todays forums are sponsored by Ian Martin Limited
Engineering/Technical Placement Specialists
www.ianmartin.com
***
On 01:34 AM 10/5/2001 -1100, Douglas McDonald wrote:
>Perhaps I ought to
***
Todays forums are sponsored by Ian Martin Limited
Engineering/Technical Placement Specialists
www.ianmartin.com
***
On 03:56 PM 10/2/2001 -0400, [EMAIL PROTECTED] wrote:
>I'm thinking of up
On 08:47 AM 9/4/2001 -0700, Brad Velander wrote:
>Andrew,
> you're not suggesting that the poor individual try to use or
>navigate the Protel help system are you? Good luck.
Nah... just sharing my own experience. Once upon a time, shortly after I started
moving from my old DOS app to P98
On 02:04 PM 9/1/2001 -0400, Mike Reagan wrote:
>Rene'
>
>I doubt if you will find a decent board house that is willing to fabricate
>poygon pours on internal layers.notice I said "decent" Talk to some
>manufacturing engineers to find out why this is frowned upon
Mike,
I'm a self-confessed
Hi,
For those who want to make life a little more difficult for ibsystems,
Copy entire message, including headers, and send to
[EMAIL PROTECTED]
I called Broadwing after getting a second spam and spoke with 1st lev support (all I
could get to on first try), and they indicated that [EMAIL PRO
On 04:27 PM 8/27/2001 -0700, Brad Velander wrote:
>Michael,
> Possibly the EDA Tool Cafe is getting it from PCD Mag or some of the
>other Miller Freeman group publications, I just recently renewed a couple of
>subscriptions and supplied my email address for further subscription
>renewals.
On 06:57 PM 8/7/2001 -0400, Mike Reagan wrote:
> > You have two rows of contacts in the connector, but four rows of pads on
> > the board (plus the center ground row)
> >
>
>
>Which brings up the question where is pin 3 and pin 4 located. Sorry we are
>tying up this forum with my dumb question.
On 11:50 AM 8/7/2001 -0400, Bagotronix Tech Support wrote:
>If you get a new PC, you should consider Dell or a local computer box
>builder. I now buy PCs from a local shop that builds Linux servers.
I assume you mean that they >specialize< in producing Linux boxes. Otherwise I'd have
to wonder
A couple more:
ADI Reliability Handbook
http://radhome.gsfc.nasa.gov/radhome/papers/RHA98.pdf
The following is a synopsis of a 1999 MicroChip corp presentation:
"
STRAIN MEASUREMENTS IN A THERMALLY-CYCLED FLIP-CHIP-ON-BOARD SOLDERBALL. Elizabeth
Drexler , National Institute of Standards and Te
On 03:01 PM 8/6/2001 -0400, Mike Reagan wrote:
>My only concerns for the Protel namebrand being diluted and migrated into
>one package with Accel under the Altium Brand name.It makes abosolutely
>no sense to have overlapping products with the lowest price product being
>superiour. As an exam
On 08:35 AM 7/26/2001 -0400, Mike Reagan wrote:
>Does anyone know if 99SE has some upper limit to the size file it can
>export to dsn?
I don't personally, but...
At a guess, Ian Wilson, Geoff Harland, or Protel CSC are the parties who can best
answer your question. I forwarded the query to Pr
On 01:10 PM 7/24/2001 -0700, Brad Velander wrote:
>Andrew,
> please don't throw me into the simple nay-sayers
Nope. I didn't. Just "doubting" Thomas, to whom I originally replied.
> I have my doubts
>about whether it could be accomplished amongst a group as diverse as ours,
>but it can
On 10:23 PM 7/24/2001 -0400, Brian Guralnick wrote:
>email glitch...
>
> For validation, on the PCB side, I used to place a 'scanned version' in
>a translucent state, of the part over the footprint. I've been able to find
>and correct many footprint problems in advance using this technique.
On 08:54 AM 7/24/2001 -0700, Brad Velander wrote:
>Andrew et al,
> I get the feeling that many people think that there would not be too
>many footprints.
IMO, "too many" is a relative term. 2500 is nothing compared to the discrete number of
components available, footprint(s) aside.
> H
On 11:28 AM 7/24/2001 +1000, Don Ingram wrote:
>Given the impact of file corruption I would have thought that this issue
>would have constituted a far more valuable use of developer time than a
>server to find the cheapest & nastiest board manufacturer.
To go a step further, Given the high likel
On 09:52 AM 7/24/2001 +1000, Thomas wrote:
>It cannot be done.
While I understand the sentiment, boy do I just hate when people say such things...
After all, there are not all THAT many footprints. Components, yes, footprints...I
don't think so...
aj
* * * * * * * * * * * * * * * * * * * *
On 04:07 PM 7/16/2001 -0700, Daniel Webster wrote:
>Has anyone ever tried to modify or add to the help menu ? Is this possible ?
>If anyone knows how to add menu items which link to text documents in the
>help menu structure please let me know.
I don't believe this has been answered yet...
Doub
why not visit the website of the company from which you
purchased your video card?
In terms of viewing an overview, the birdseye is, of course, always
available for viewing the overview...
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center fo
n:
>
>Backup system state with MS Backup
>Install Protel
>Install SP6
>Restore system state with MS Backup
>
>Caveats:
>1. If your system is already degraded, this will not fix it.
>2. I have not done detailed investigations to know what this does so there
>may be
ts.
Dabid,
I'd suggest that if you're creating the component, color pins to reflect
the pin type.
If you're simply looking at someone else's...lo siento...
aj
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravi
Yep. A much better treatment than I could offer!
You cited several print articles. Perhaps you could just post the ISDNs?
regards,
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
NASA-Glenn Research Center MS 45-1
21000 Brook
sonally, my work requires no such worries, so I don't have much more
than an academic interest at this point.
If I find something out more authoritative, I'll let "y'all" know...
regards,
Andrew J Jenkins. NCMR @ NASA-GRC
[EMAIL PROTECTED]
The opinions expressed he
have something to offer, as they have treated PCB mfg-ing in the past
(though I can't remember how recently...)
Also, try
regards,
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
NASA-Glenn Research Center MS
emember which resources they were...
FWIW, I always suspected that my Diamond video cards or their enhanced
driver software played a part in creating the problem, but I haven't any
definite proof to that effect...
regards,
Andrew J Jenkins. NCMR @ NASA-GRC
[EMAIL PROTECTED]
The opinion
>be able to find, in a few operations, exactly what part or primitive is
>causing difficulties.
Shrewd method, Mr Lomax...IMO, this one deserves inclusion into the FAQ
regards,
aj
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for
Hey,what's a 100M ddb, after all, I
have a t1...what's a measily 500M ddb."
And no, I'm not comparing whatever "small file" you sent to what's
suggested in the the banter above, I'm just rephrasing that old "give-'em
an inch" phr
digital circuits" sections, or use the index to find
specific references to the topic.
Not to beat a horse dead, but the Internet is a great place to find
information too.
regards,
aj
Andrew J Jenkins. NCMR @ NASA-GRC
[EMAIL PROTECTED]
The opinions expressed herein are soley mine and do not
y-fast.
aj
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
NASA-Glenn Research Center MS 45-1
21000 Brookpark Rd, Cleveland OH 44135
(216) 433-5001 fax:433-3793
[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * *
time and money, which could
have been caught by an energetic up-and-comer going beyond their narrowly
specified sub-sub-sub task.
Everyone...
Bite me for asking, but at ten posts (hmm..now it's 11) and counting, maybe
this has gone on long enough to move it to the OT group?
aj
Andrew J
re.
regards,
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
NASA-Glenn Research Center MS 45-1
21000 Brookpark Rd, Cleveland OH 44135
(216) 433-5001 fax:433-3793
[EMA
n NT4.
regards,
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
NASA-Glenn Research Center MS 45-1
21000 Brookpark Rd, Cleveland OH 44135
(216) 433-5001 fax:433-3793
[EMAIL PROTECTED]
* * * * * * * * * * * * * *
On 01:05 PM 3/23/01 -0500, Mike Reagan said:
>I think the long lags are due to no electric power in California
They must have some damn-fast carrier pigeons then...
aj
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Resea
can just delete...yadda,yadda,yadda" So can you, as the originator.
Please do.
thanks in advance from your favorite (or least favorite)
curmudgeon-in-training,
aj
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
On 04:32 PM 3/23/2001 -0600, Heart wrote:
>Talking with different board houses and other PCB designers I get different minimum
>widths for traces and gaps for high volume production boards. One board house tells
>me:
This morning, while doing a net search on something else, I chanced into an
On 09:41 PM 3/23/2001 -0800, Abd ul-Rahman Lomax wrote:
>At 02:38 PM 3/23/01 -0500, Andrew J Jenkins wrote:
>
>>Edit->Select->Outside--->then select a window defined by the boundaries of the
>schematic (the part you WANT to save)
>>
>>Now Edit->deleTe
>
rds,
aj
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
NASA-Glenn Research Center MS 45-1
21000 Brookpark Rd, Cleveland OH 44135
(216) 433-5001 fax:433-3793
[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * *
On 02:11 PM 3/23/2001 -0800, Abd ul-Rahman Lomax wrote:
>I've been hit with only one rolling blackout and it lasted about an hour. I have a
>few minutes' backup on my main system, so I had time to shut down in an orderly
>fashion.
Abd ul-Rahman,
Have you considered purchasing something more s
, to the point of neurosis)
regards,
aj
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
NASA-Glenn Research Center MS 45-1
21000 Brookpark Rd, Cleveland OH 44135
(216) 433-5001 fax:433-3793
k" worked on
files. I thought it was only for object manipulation, _within_ an editor's
workspace, not at the project-manager level.
thanks for the tip.
aj
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Re
(and remember, Protel's service packs
are inclusive, ie, they include all previous service packs for a given
product, so there's no need to install sp1,sp2, etc...)
regards,
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Micro
>B is nonsequitor.
I'm not quite sure I follow your reasoning.
Thanks,
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
NASA-Glenn Research Center MS 45-1
21000 Brookpark Rd, Cleveland OH 4413
I said:
>Interesting though. I would expect Protel to release printer functions to
>Windows.
I meant to say "low-level printer functions"
2.2 S E C O N D D R O P T O W E R
Andrew J JenkinsElectrical Engineer
National Center for Microgravity Research
NASA-Glenn
1 - 100 of 136 matches
Mail list logo